Nothing Special   »   [go: up one dir, main page]

Skip to main content

previous disabled Page of 3
and
  1. No Access

    Article

    Coupled CA-FE Simulation for Dynamic Recrystallization of Mg-8Gd-4Sm-1Zn-0.5Zr Alloy During Hot Compression Deformation

    In this paper, the dynamic recrystallization behavior and microstructure evolution during thermal deformation were simulated by coupling finite element (FE) and cellular automaton (CA) models. The thermal defo...

    Xikuan Guo, Jun Chen, Quanan Li, Xiaoya Chen in Metals and Materials International (2024)

  2. No Access

    Article

    Effect of Yb Addition on the Microstructure and Mechanical Properties of the Mg–4Sm–3Gd–0.5Zr Alloy

    The microstructure and mechanical properties of Mg-4Sm-3Gd-xYb-0.5Zr (x = 0, 1, 2, 3 wt%) alloys under different heat treatment states were systematically investigated, as well as the influence mechanism of the Y...

    Nana Zhang, Quanan Li, Xiaoya Chen, Wanwan Mei in Metals and Materials International (2024)

  3. No Access

    Article

    Effect of Heat Treatment on the Long-Period Stacking Ordered Phase and Mechanical Properties of the Mg-10Y-2Zn-0.5Zr Alloy

    The microstructure evolution and mechanical properties of Mg-10Y-2Zn-0.5Zr under different heat-treatment conditions were studied. The experimental results show that the as-cast alloy is mainly composed of the...

    Mingming Liu, Hao Pang, Quanan Li in Journal of Materials Engineering and Perfo… (2024)

  4. No Access

    Article

    Coupled CA-FE Simulation for Dynamic Recrystallization Microstructure Evolution of AZ61 Magnesium Alloy

    The dynamic recrystallization (DRX) behavior during the thermal deformation process of AZ61 magnesium alloy was systematically studied using a combined finite element (FE) and cellular automaton (CA) model. Is...

    Yingjie Chen, Quanan Li, Xiaoya Chen, Jinfeng Tan in Metals and Materials International (2024)

  5. No Access

    Article

    Application Status and Prospects of Friction Stir Processing in Wrought Magnesium Alloys: A Review

    As an industrially reliable, controllable and effective deformation technique, friction stir process (FSP) can significantly refine the grain size, effectively activate prismatic plane and pyramidal plane slip...

    Zeyu Zheng, Quanan Li, Xiaoya Chen, Ao Gao in Transactions of the Indian Institute of Me… (2024)

  6. No Access

    Article

    Comparison of diffusion tensor imaging (DTI) tissue characterization parameters in white matter tracts of patients with multiple sclerosis (MS) and neuromyelitis optica spectrum disorder (NMOSD)

    To investigate the microstructural properties of T2 lesion and normal-appearing white matter (NAWM) in 20 white matter tracts between multiple sclerosis (MS) and neuromyelitis optica spectrum disorder (NMOSD) ...

    Xiaoya Chen, Neil Roberts, Qiao Zheng, Yuling Peng, Yongliang Han in European Radiology (2024)

  7. No Access

    Article

    Cellular Automata Simulation of Dynamic Recrystallization Behavior of AZ81-1Y Magnesium Alloy Based on Laasraoui–Jonas Model

    Under the conditions of deformation temperature of 250-400 °C and strain rate of 0.003-1 s−1, hot compression experiments on AZ81-1Y magnesium alloy are carried out by using the Gleeble-1500D testing machine, the...

    Yingjie Chen, Quanan Li, Xiaoya Chen in Journal of Materials Engineering and Perfo… (2024)

  8. No Access

    Article

    iJAZ-based approach to engineer lepidopteran pest resistance in multiple crop species

    The fall armyworm (FAW) poses a significant threat to global crop production. Here we showed that overexpression of jasmonate ZIM-domain (JAZ) protein GhJAZ24 confers resistance to cotton bollworm and FAW, whi...

    Huijuan Mo, Huimin Chang, Ge Zhao, Guanjing Hu, Xiumei Luo, Xue Jia in Nature Plants (2024)

  9. No Access

    Article

    Microstructure Evolution and Selection Behavior of Twin Variants of Mg-5Gd-3Y-0.5Zr Alloy during Secondary Deformation

    A solution-treated (T4) Mg-5Gd-3Y-0.5Zr (named GW53K) alloy was subjected to 20%/0.002 s−1 thermal deformation along the compression direction 1 at 350 °C followed by 20%/0.2 s−1 deformation along the transverse ...

    Ao Gao, Xiaoya Chen, Quanan Li, Huanju He in Journal of Materials Engineering and Perfo… (2024)

  10. No Access

    Article

    U-fiber diffusion kurtosis and susceptibility characteristics in relapsing–remitting multiple sclerosis may be related to cognitive deficits and neurodegeneration

    To evaluate the diffusion kurtosis and susceptibility change in the U-fiber region of patients with relapsing–remitting multiple sclerosis (pwRRMS) and their correlations with cognitive status and degeneration.

    Dan Luo, Yuling Peng, Qiyuan Zhu, Qiao Zheng, Qi Luo, Yongliang Han in European Radiology (2024)

  11. No Access

    Article

    Twinning Behavior in Wrought Magnesium Alloys and its Connection with Texture, Precipitates and Mechanical Properties

    Twinning is an important mechanism for coordinated plastic deformation of magnesium alloys. Pre-setting {10–12} extension twins into magnesium alloy will change the orientation of c-axis of grains and eliminat...

    Ao Gao, Quanan Li, Xiaoya Chen in Transactions of the Indian Institute of Metals (2024)

  12. No Access

    Article

    Effect of Ce Microalloying on Microstructure and Mechanical Properties of Extruded Mg–10Gd–0.5Zr Alloy

    The influence of Ce microalloying (0.6 wt%) on the microstructure and strengthening mechanism of the extruded Mg–10Gd–0.5Zr alloy were comprehensively researched and analyzed. The experimental results revealed...

    Laidong Yang, Quanan Li, Xiaoya Chen, Wanwan Mei in Metals and Materials International (2023)

  13. No Access

    Article

    A comprehensive overview of cotton genomics, biotechnology and molecular biological studies

    Cotton is an irreplaceable economic crop currently domesticated in the human world for its extremely elongated fiber cells specialized in seed epidermis, which makes it of high research and application value. ...

    Xingpeng Wen, Zhiwen Chen, Zuoren Yang, Maojun Wang in Science China Life Sciences (2023)

  14. No Access

    Article

    Effect of Ho Content and Heat Treatment on the Corrosion Resistance of Mg-xHo-3Sm-0.5Zr Alloy

    The corrosion resistance of as-cast Mg-xHo-3Sm-0.5Zr, solid solution and aged Mg-8Ho-3Sm-0.5Zr alloys was studied by electrochemical experiments, weight loss tests and microstructure analysis. The results showed ...

    Hang Leng, Quanan Li, Xiaoya Chen in Journal of Materials Engineering and Perfo… (2023)

  15. No Access

    Article

    Hexafluorobutanol primary alcohol ethoxylate-based supramolecular solvent formation and their application in direct microextraction of malachite green and crystal violet from lake sediments

    A new type of hexafluorobutanol (HFB) primary alcohol ethoxylate (AEO)-based supramolecular solvent (SUPRAS) with density higher than water was prepared for the first time. HFB acted as AEO micelle-forming ag...

    Yang Yu, Nanya Pai, Xiaoya Chen, Baoling Wang in Analytical and Bioanalytical Chemistry (2023)

  16. No Access

    Article

    Effect of Micro-alloyed Ce on the Microstructure and Mechanical Properties of Mg-Gd-Zr Alloy

    The effect of the microalloying element Ce on the microstructure and tensile mechanical properties of a Mg-10Gd-0.5Zr alloy was investigated in this work. The results indicated that adding a small amount of Ce...

    Laidong Yang, Quanan Li, Xiaoya Chen in Journal of Materials Engineering and Perfo… (2023)

  17. No Access

    Article

    Enlarged choroid plexus related to cortical atrophy in multiple sclerosis

    To investigate the correlation between choroid plexus volume and whole brain morphology in patients with multiple sclerosis (MS) and neuromyelitis optica spectrum disorder (NMOSD).

    Xiaoya Chen, Dan Luo, Qiao Zheng, Yuling Peng, Yongliang Han, Qi Luo in European Radiology (2023)

  18. No Access

    Article

    Effect of Heat Treatment on Corrosion and Mechanical Properties of Mg-10Y-1.5Zn-0.5Zr Alloy

    In this paper, the microstructure evolution, corrosion and mechanical properties of Mg-10 Y-1.5 Zn-0.5 Zr alloy under different heat treatment conditions were studied systematically. The results demonstrate th...

    Mingming Liu, Quanan Li, Xiaoya Chen in Journal of Materials Engineering and Perfo… (2023)

  19. No Access

    Article

    Dynamic Recrystallization Mechanism and Precipitation Behavior of Mg-6Gd-3Y-3Sm-0.5Zr Alloy During Hot Compression

    The effects of temperature and strain on dynamic recrystallization (DRX) and dynamic precipitation of Mg-6Gd-3Y-3Sm-0.5Zr alloy were studied through uniaxial compression. The main conclusions were as follows: ...

    Hao Pang, Quanan Li, Xiaoya Chen, Peijun Chen in Metals and Materials International (2023)

  20. Article

    Open Access

    New function of gossypol, a natural product of cotton

    Jinquan Huang, Xiaoya Chen in Journal of Cotton Research (2022)

previous disabled Page of 3

JavaScript is currently disabled, this site works much better if you enable JavaScript in your browser.