Nothing Special   »   [go: up one dir, main page]
Skip to main content
Springer Nature Link
Log in

Evaluation of Centrifugal Casting Process Parameters for In Situ Fabricated Functionally Gradient Fe-TiC Composite

  • Published:
Metallurgical and Materials Transactions B Aims and scope Submit manuscript

Abstract

A gradient Fe-TiC composite was successfully produced via combination of in situ reaction with centrifugal casting techniques. Additionally, some of the effective parameters of the centrifugal casting process have been studied. Cast iron and ferrotitanium, which were used as raw materials, were melted using a high-frequency induction furnace coupled with centrifugal equipment. The microstructure and phase characterization of the fabricated composite was studied by scanning electron microscopy, optical microscopy, and X-ray diffraction. The results show that the production of a pearlite matrix composite reinforced by TiC particles is feasible. The distribution of TiC in the pearlitic matrix is completely uneven as a result of density difference between molten medium and TiC in the centrifugal casting process.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

References

  1. Z.T. Wang, X.H. Zhou, and G.G. Zhao: Trans. Nonferrous Met. Soc. China, 2008, vol. 18, pp. 831-35.

    Article  CAS  Google Scholar 

  2. A. Farid, S. Guo, F. Cui, P. Feng, and T. Lin: Mater. Lett., 2007, vol. 61, pp. 189-91.

    Article  Google Scholar 

  3. B. Kieback, A. Neubrand, and H. Riedel: Mater. Sci. Eng. A, 2003, vol. 362A, pp. 81-105.

    Google Scholar 

  4. Z. Yan-bo, L. Chang-ming, W. Kai, Z. Mao-hua, and X. Yong: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 361-70.

    Article  Google Scholar 

  5. Y. Watanabe, A. Kawamoto, and K. Matsuda: Compos. Sci. Technol., 2002, vol. 62, pp. 881-88.

    Article  CAS  Google Scholar 

  6. S.M.L. Nai, M. Gupta, and C.Y.H. Lim: Compos. Sci. Technol., 2003, vol. 63, pp. 1895-909.

    Article  CAS  Google Scholar 

  7. Q. Wang, T. Liu, A. Gao, C. Zhang, C. Wang, and J. He: Scripta Mater., 2007, vol. 56, pp. 1087-90.

    Article  CAS  Google Scholar 

  8. S. Put, J. Vleugels, and O. Van der Biest: J. Mater. Process. Technol., 2003, vols. 143-144, pp. 572-77.

    Article  Google Scholar 

  9. T.P.D. Rajan, R.M. Pillai, and B.C. Pai: Mater. Charact., 2010, vol. 61, pp. 923-28.

    Article  CAS  Google Scholar 

  10. R. Rodrı′guez-Castro, R.C. Wetherhold, and M.H. Kelestemur: Mater. Sci. Eng. A, 2002, vol. 323A, pp. 445-56.

    Google Scholar 

  11. A.K. Srivastava and K. Das: Tribolo. Int., 2010, vol. 43, pp. 944-50.

    Article  CAS  Google Scholar 

  12. I.W.M. Brown and W.R. Owers, Fabrication, Curr. Appl. Phys., 2004, vol. 4, pp. 171-74.

    Article  Google Scholar 

  13. R. Licheri, R. Orru, G. Cao, A. Crippa, and R. Scholz: Ceram. Int., 2003, vol. 29, pp. 519-26.

    Article  CAS  Google Scholar 

  14. W. Jing and W. Yisan: Mater. Lett., 2007, vol. 61 (22), pp. 4393–95.

  15. B. Li, Y. Liu, H. Cao, L. He, and J. Li: Mater. Lett., 2009, vol. 63, pp. 2010-12.

    Article  CAS  Google Scholar 

  16. K. Feng, Y. Yang, B. Shen, and L. Guo: Mater. Design, 2005, vol. 26, pp. 37-40.

    Article  CAS  Google Scholar 

  17. M. Razavi, M.S. Yaghmaee, M.R. Rahimipour, and S.S. Razavi Tousi: Int. J. Miner. Process., 2010, vol. 94, pp. 97-100.

    Article  CAS  Google Scholar 

  18. C. Cui, Z. Guo, H. Wang, and J. Hu: J. Mater. Process. Technol., 2007, vol. 183, pp. 380-85.

    Article  CAS  Google Scholar 

  19. X.H. Wang, S.L. Song, S.Y. Qu, and Z.D. Zou: Surf. Coat. Technol., 2007, vol. 201, pp. 5899-905.

    Article  CAS  Google Scholar 

  20. H. Fua, Q. Xiao, and J. Xing: Mater. Sci. Eng. A, 2008, vol. 479A, pp. 253-60.

    Google Scholar 

  21. X.H. Wang, S.L. Song, Z.D. Zou, and S.Y. Qu: Mater. Sci. Eng. A, 2006, vol. 441A, pp. 60-67.

    Google Scholar 

  22. J.H. Hilderbrand and R.H. Lamoreaux: Proc. Natl. Acad. Sci. USA, 1976, vol. 73 (4), pp. 988–89.

  23. Y. Sato, K. Sugisawa, D. Aoki, and T. Yamamura: Meas. Sci. Technol., 2005, vol. 16 (2), pp. 363–71.

Download references

Author information

Authors and Affiliations

  1. Materials and Energy Research Center, Karaj, 31787-316, Iran

    Mohammad Reza Rahimipour (Professor) & Manoochehr Sobhani (Ph.D. Student)

  2. Department of Ceramic, Materials and Energy Research Center, Karaj, 31787-316, Iran

    Mohammad Reza Rahimipour (Professor)

Authors
  1. Mohammad Reza Rahimipour
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Manoochehr Sobhani
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohammad Reza Rahimipour.

Additional information

Manuscript submitted January 14, 2013.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Rahimipour, M.R., Sobhani, M. Evaluation of Centrifugal Casting Process Parameters for In Situ Fabricated Functionally Gradient Fe-TiC Composite. Metall Mater Trans B 44, 1120–1123 (2013). https://doi.org/10.1007/s11663-013-9903-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11663-013-9903-z

Keywords

Search

Navigation