Abstract
Since introduction of the Raspberry Pi embedded computers to the market, its popularity is constantly growing. More and more both hardware and software modules are available for that device. One of the later ones is CODESYS development environment, which make it possible to program Raspberry Pi like a regular Programmable Logic Controllers PLC. Using its network interfaces and industrial protocols like Ethercat or Profinet available in CODESYS, too, one could consider using Raspberry as a node in Networked Control System. Posts and opinions shared on Internet forums proofs it. However, one thing should not be ignored – Raspberry has been never intended to be implemented in industrial environment and was not designed as a real-time device. Therefore before practical application of Raspberry Pi, its temporal characteristics should be analyzed. It is the main concern in the following chapter.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Jain, S., Vaibhav, A., Goyal, L.: Raspberry Pi based interactive home automation system through E-mail. In: 2014 International Conference on Reliability Optimization and Information Technology (ICROIT), pp. 277–280, February 2014
Vaidya, B., Patel, A., Panchal, A., Mehta, R., Mehta, K., Vaghasiya, P.: Smart home automation with a unique door monitoring system for old age people using python, opencv, android and raspberry Pi. In: 2017 International Conference on Intelligent Computing and Control Systems (ICICCS), pp. 82–86, June 2017
Frieslaar, I., Irwin, B.: Investigating the electromagnetic side channel leakage from a raspberry Pi. In: 2017 Information Security for South Africa (ISSA), pp. 24–31, August 2017
Sharma, J., Anbarasu, M., Chakraborty, C., Shanmugasundaram, M.: Iris movement based wheel chair control using raspberry Pi - a state of art. In: 2017 Innovations in Power and Advanced Computing Technologies (i-PACT), pp. 1–5, April 2017
Wardi, Achmad, A., Hasanuddin, Z.B., Asrun, D., Lutfi, M.S.: Portable IP-based communication system using raspberry Pi as exchange. In: 2017 International Seminar on Application for Technology of Information and Communication (iSemantic), pp. 198–204, October 2017
Kadiyala, E., Meda, S., Basani, R., Muthulakshmi, S.: Global industrial process monitoring through IoT using raspberry Pi. In: 2017 International Conference on Nextgen Electronic Technologies: Silicon to Software (ICNETS2), pp. 260–262, March 2017
IEC 61131–3 Programmable controllers - Part 3: Programming languages (2003)
Rzońca, D., Sadolewski, J., Stec, A., Świder, Z., Trybus, B., Trybus, L.: CPDev engineering environment for control programming. In: Mitkowski, W., Kacprzyk, J., Oprzędkiewicz, K., Skruch, P. (eds.) Trends in Advanced Intelligent Control, Optimization and Automation. KKA 2017. Advances in Intelligent Systems and Computing, vol. 577, pp. 303–314. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-60699-6_29
Rząsa, W., Rzonca, D.: Event-driven approach to modeling and performance estimation of a distributed control system. In: Gaj, P., Kwiecień, A., Stera, P. (eds.) CN 2016. CCIS, vol. 608, pp. 168–179. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-39207-3_15
Basile, F., Chiacchio, P., Gerbasio, D.: On the implementation of industrial automation systems based on PLC. IEEE Trans. Autom. Sci. Eng. 10(4), 990–1003 (2013)
Jamro, M., Rzonca, D.: Impact of communication timeouts on meeting functional requirements for IEC 61131-3 distributed control systems. Automatika 56(4), 499–507 (2015)
Masino, J., Frey, M., Gauterin, F., Sharma, R.: Development of a highly accurate and low cost measurement device for field operational tests. In: 2016 IEEE International Symposium on Inertial Sensors and Systems, pp. 74–77, February 2016
Menezes, V., Patchava, V., Gupta, M.S.D.: Surveillance and monitoring system using raspberry Pi and simplecv. In: 2015 International Conference on Green Computing and Internet of Things (ICGCIoT), pp. 1276–1278, October 2015
Abankwa, N., Squicciarini, G., Johnston, S., Scott, M., Cox, S.J.: An evaluation of the use of low-cost accelerometers in assessing fishing vessel stability through period of heave motion, October 2016
Mane, S.B., Vhanale, S.: Real time obstacle detection for mobile robot navigation using stereo vision. In: 2016 International Conference on Computing, Analytics and Security Trends (CAST), pp. 637–642, December 2016
Salunkhe, A.A., Kamble, P.P., Jadhav, R.: Design and implementation of can bus protocol for monitoring vehicle parameters. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information Communication Technology (RTEICT), pp. 301–304, May 2016
Sahitya, S., Lokesha, H., Sudha, L.K.: Real time application of raspberry Pi in compression of images. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information Communication Technology (RTEICT), pp. 1047–1050, May 2016
Joardar, S., Chatterjee, A., Rakshit, A.: A real-time palm dorsa subcutaneous vein pattern recognition system using collaborative representation-based classification. IEEE Trans. Instrum. Measur. 64(4), 959–966 (2015)
Patruno, C., Marani, R., Nitti, M., D’Orazio, T., Stella, E.: An embedded vision system for real-time autonomous localization using laser profilometry. IEEE Trans. Intell. Transp. Syst. 16(6), 3482–3495 (2015)
Guide for the EMC directive 2004/108/EC - european commission (2004)
Electromagnetic compatibiliy directive 2014/30/EU (2014)
Yuan, S.Y., Chung, W.Y., Chen, C.C., Chen, C.K.: Software-related EMI behavior of embedded microcontroller. In: 2014 IEEE International Symposium on Electromagnetic Compatibility (EMC), pp. 118–122, August 2014
Smys, S., Thara Prakash, J., Raj, J.S.: Conducted emission reduction by frequency hopping spread spectrum techniques. Nat. Acad. Sci. Lett. 38(3), 197–201 (2015)
Kwiecień, A., Maćkowski, M., Skoroniak, K.: Reverse engineering of microprocessor program code. In: Kwiecień, A., Gaj, P., Stera, P. (eds.) CN 2012. CCIS, vol. 291, pp. 191–197. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-31217-5_21
Ma, W., Zhao, Z., Meng, J., Pan, Q., Zhang, L.: Precise methods for conducted emi modeling, analysis, and prediction. Sci. China Ser. E Technol. Sci. 51(6), 641–655 (2008)
Yuan, S.Y., Su, W.B., Ho, H.P.: A software technique for EMI optimization, May 2012
Kreitlow, M., Garbe, H., Sabath, F.: Influence of software effects on the susceptibility of Ethernet connections. In: 2014 IEEE International Symposium on Electromagnetic Compatibility (EMC), pp. 544–548, August 2014
Kwiecień, A., Stój, J.: The cost of redundancy in distributed real-time systems in steady state. In: Kwiecień, A., Gaj, P., Stera, P. (eds.) CN 2010. CCIS, vol. 79, pp. 106–120. Springer, Heidelberg (2010). https://doi.org/10.1007/978-3-642-13861-4_11
Wideł, S., Flak, J., Gaj, P.: Interpretation of dual peak time signal measured in network systems. In: Kwiecień, A., Gaj, P., Stera, P. (eds.) CN 2010. CCIS, vol. 79, pp. 141–152. Springer, Heidelberg (2010). https://doi.org/10.1007/978-3-642-13861-4_14
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Stój, J., Smołka, I., Maćkowski, M. (2018). Determining the Usability of Embedded Devices Based on Raspberry Pi and Programmed with CODESYS as Nodes in Networked Control Systems. In: Gaj, P., Sawicki, M., Suchacka, G., Kwiecień, A. (eds) Computer Networks. CN 2018. Communications in Computer and Information Science, vol 860. Springer, Cham. https://doi.org/10.1007/978-3-319-92459-5_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-92459-5_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-92458-8
Online ISBN: 978-3-319-92459-5
eBook Packages: Computer ScienceComputer Science (R0)