Abstract
In this paper, dual-band wearable microstrip patch antenna printed on FR4-substrate is designed and fabricated for wearable wireless communications. A star-shaped monopole Ω antenna connected to 50 Ω transmission line, backed by partial ground plane is used. The antenna dimensions are optimized for wideband radiation characteristics. Different types of dielectric substrates are investigated for wideband wearable applications. The proposed antenna printed on jeans textile substrate introduces an impedance matching bandwidth of 7.3 GHz with maximum gain of 5 dBi. The effect of mutual coupling between two parallel patches, two opposite patches and two orthogonal patches on their radiation characteristics are investigated. High isolation is achieved for two orthogonal patches placed away from each other by 0.3λ with a rectangular strip etched between them and cutting in the ground plane. The isolation is below − 29 dB within the frequency band. The structure achieves impedance matching bandwidth of 1.8 GHz in 1st-band and 4.8 GHz in 2nd-band with maximum gains of 8.5 dBi and 5.3 dBi, respectively. A prototype element is fabricated, measured and the radiation characteristics coincide with the simulated results. The structure is simple, light-weight, and is suitable for WAN applications in the frequency band from 2 GHz to 7 GHz. The effect of human body tissue on the radiation characteristics of the antenna array is investigated.
Similar content being viewed by others
References
Saeidi, T., et al., (2020) “Equivalent circuit (EC) approximation of miniaturized elliptical UWB antenna for imaging of wood,” Intelligent computing and innovation on data science, Springer, pp 447–455
Sun, H., Zhang, Z., Hu, R. Q., & Qian, Y. (2018). Wearable communications in 5G: Challenges and enabling technologies. IEEE Vehicular Technology Magazine, 13, 100–109.
Mumtaz, S., Bo, A., Al-Dulaimi, A., & Tsang, K. F. (2018). Guest editorial 5G and beyond mobile technologies and applications for industrial IoT (IIoT). IEEE Transactions on Industrail Informatics, 14, 2588–2591.
Yadav, A., Singh, V. K., Bhoi, A. K., Marques, G., Garcia-Zapirain, B., & de la Torre, I. D. (2020). Wireless body area networks: UWB wearable textile antenna for telemedicine and mobile health systems. Micromachines, 11, 558. https://doi.org/10.3390/mi11060558
Deya, S., et al. (2013). Design of wearable antenna system on different materials & their performance analysis at the off and on body environment in terms of impedance matching and radiation characteristics. American Academic & Scholarly Research Journal, 5(5), 181–192.
Zainud-Deen, S. H., El-Shalaby, N. A., Malhat, H. A., & Awadalla, K. H. (2012). Dielectric resonator antenna mounted on cylindrical ground plane for handheld RFID reader at 5.8 GHz. Advanced Eelectromagnetics, 1(3), 71–78.
Ramamoorth, D. (2014). “Impact of Mutual Coupling among Antenna Arrays on the Performance of the Multipath Simulator System” Master’s Thesis in Electronics. Faculty of Engineering and Sustainable Development, University of Gavle.
Ding, H., Yang, R., Tan, M., Gangxiong, W., Lei, X., Jiang, X., Fang, S., Huang, M., Gong, Y., & Wei, Y. (2020). Mutual coupling reduction between patch antennas using meander line”. International Journal of Antennas and Propagation, Hindawi, 2018, 1–7. https://doi.org/10.1155/2018/2586382
Azhiri, F. A., Abdolee, R., Tazehkand, B. M., (2019) “Effect of mutual coupling on the performance of STCM-MIMO Systems”. In IEEE wireless communications and networking conference workshop (WCNCW)
Xi, Y. P., Fang, D. G., Sun, Y. X., & Chow, Y. L. (2005). Mutual Coupling in finite microstrip patch arrays. Microwave and Optical Technology Letters, 44(6), 577–581.
Tripathi, K., Sharma, A., Jha, M., (2021) “Orthogonal elements CSRR-based UWB-MIMO antenna with improved isolation and multiple band rejection function”. In 7th International conference on advanced computing and communication systems (ICACCS)
Abbasi, M. A. B., Nikolaou, S. S., Antoniades, M. A., Stevanovic, M. N., & Vryonides, P. (2017). Compact EBG-backed planar monopole for BAN wearable applications. IEEE Transactions on Antennas and Propagation, 65(2), 453–463.
Wei, K., Li, J., Wang, L., Xing, Z., & Xu, R. (2016). S-shaped periodic defected ground structures to reduce microstrip antenna array mutual coupling. Electronics Letters, 52(15), 1288–1290.
Al-Shalaby, N. A., & El-sherbiny, S. G. (2019). Mutual coupling reduction of DRA for MIMO applications. Advanced Electromagnetics, 8(1), 1–75.
Wael, A. L. I., & Ibrahim, A. A. (2017). A compact double-sided MIMO antenna with an improved isolation for UWB applications. International Journal of Electronics and Communications, 82, 7–13.
Altaf, A., Iqbal, A., Smida, A., Smida, J., Althuwayb, A. A., Kiani, S. H., Alibakhshikenari, M., Falcone, F., & Limiti, E. (2020). Isolation improvement in UWB-MIMO antenna system using slotted stub. Electronics, 9(10), 1582.
Elshalaby, N. A., Zainud-Deen, S. H. (2013). Performance analysis of antennas for portable radio unit. LAP Lambert Academic Publishing, Germany, 2013.
Khan, M. S., Capobianco, A.-D., Iftikhar, A., Shubair, R. M., Anagnostou, D. E., & Braaten, B. D. (2017). Ultracompact dual-polarised UWB MIMO antenna with meandered feeding lines. IET Microwaves, Antennas & Propagation, 11, 997–1002.
He, S., Wei, X., Xu, Z., Wang, N., & Zheng, Y. (2014). Compact printed UWB diversity slot antenna with GHz band-notched characteristics. IEEE Antennas and Wireless Propagation Letters, 13, 376379.
Zhu, J., Li, S., Feng, B., Deng, L., & Yin, S. (2016). Compact dual-polarized UWB quasi-self-complementary MIMO/diversity antenna with band-rejection capability. IEEE Antennas and Wireless Propagation Letters, 15, 905–908.
Liu, L., Cheung, S., & Yuk, T. (2015). Compact MIMO antenna for portable UWB applications with band-notched characteristic. IEEE Transactions on Antennas and Propagation, 63, 1917–1924.
Moraru, A., Ursachi, C., & Helerea, E. (2020). A new washable UHF RFID tag: Design, fabrication, and assessment. Sensors, 20(12), 3451.
Scarpello, M. L., Kazani, I., Hertleer, C., Rogier, H., & Ginste, D. V. (2012). Stability and efficiency of Screen –printed werable and washable antennas. IEEE Antennas and Wireless Propagation Letters, 11, 838–841.
Acknowledgements
This study was supported by the Electronic research institute.
Funding
There is No funds, grants, or other support was received to conduct this study.
Author information
Authors and Affiliations
Contributions
All the authors contribute equally in this paper.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflicts of interest or competing interests to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gaber, S.M., El-Shalaby, N.A. & Malhat, H.A. Dual-Band Antenna Array with Reduced Mutual-Coupling for Wearable Wireless Communication Applications. Wireless Pers Commun 122, 3777–3794 (2022). https://doi.org/10.1007/s11277-021-09111-w
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-021-09111-w