ICs

562 Pins
·
1y
TNY268PN Enhanced, Energy Efficient, Low Power Off-line Switcher
The TNY268PN IC belongs to the TNY26x series of ICs, it is manufactured by Power Integrations along with other Power-switching ICs under its TinySwitch collection.
TNY278 Off-Line Switcher IC
TinySwitch-III TNY278 combines a high voltage power MOSFET switch with a power supply controller in one device. Unlike conventional PWM (pulse width modulator) controllers, it uses a simple ON/OFF control to regulate the output voltage.
SN74LS74AN Dual D Flip-Flop IC
The SN74LS74AN is a dual D flip-flop manufactured by Texas Instruments containing two independent positive-edge triggered D flip-flops with set and reset inputs. The SN74 family is characterized for operation from 0 °C to 70 °C.
How does Digital Potentiometers work, why and where should you use them?
DigiPOTs are better protected in various environmental conditions as they are encapsulated in the form of an IC. They are less vulnerable to vibrations and they can’t tamper physically, this makes them more reliable to use.
LM301 Op-Amp IC
The LMx01 family of op-amps was designed by the legendary Bob Widlar in the late 1960s, and still remains one of the best op-amps in its class.
LM301 Op-Amp IC
The LMx01 family of op-amps was designed by the legendary Bob Widlar in the late 1960s, and still remains one of the best op-amps in its class.
SN7406N Hex Inverting Buffer IC
The SN7406N from Texas Instruments is an open-collector buffer that can be used as a logic level shifter or a high current logic interface driver. Each IC has six such buffers which enable a wide variety of loads to be used, not limited to small DC motors and 7-segment displays.
SN7406N Hex Inverting Buffer IC
The SN7406N from Texas Instruments is an open-collector buffer that can be used as a logic level shifter or a high current logic interface driver. Each IC has six such buffers which enable a wide variety of loads to be used, not limited to small DC motors and 7-segment displays.
TP5000 Switching Battery Charger
The TP5000 is a single-cell lithium battery charger. Unlike other chargers, the TP5000 is a switching charger, meaning it can supply higher currents while being efficient at the same time.
MB10S Bridge Rectifier
The MB10S from ON Semiconductor is an integrated full-bridge rectifier in a small SOIC-4 package. It is meant to be used in applications where space is premium, like miniature phone chargers. It has a very high peak current capability, making it ideal for use with switching supplies.
MB10S Bridge Rectifier
The MB10S from ON Semiconductor is an integrated full-bridge rectifier in a small SOIC-4 package. It is meant to be used in applications where space is premium, like miniature phone chargers. It has a very high peak current capability, making it ideal for use with switching supplies.
TYN268PN Off-Line Switcher
The TYN268PN is an integrated off-line switching IC that contains the controller and power switch in one package. It needs a minimum number of external components to implement a mains-powered flyback converter.
TYN268PN Off-Line Switcher
The TYN268PN is an integrated off-line switching IC that contains the controller and power switch in one package. It needs a minimum number of external components to implement a mains-powered flyback converter.
PCF8563: Real-Time Clock/Calendar IC
The PCF8563 RTC integrated circuit, is designed with low power consumption and a wide operating voltage range in mind.
PCF8563: Real-Time Clock/Calendar IC
The PCF8563 RTC integrated circuit, is designed with low power consumption and a wide operating voltage range in mind.