three storey villa 3-03 3D मॉडल

brief introduction ([beijing] construction drawing of a three storey flowing villa (including renderings))



engineering design time: september 2004

drawing depth: construction drawing

other professional drawings: structure

construction area: 1364.17 square meters

land area: 428.25 square meters

plot ratio: 0.47

greening rate: 46.1%

building height: 11.85m

building floors: 3

renderings: yes

air defense: none

the construction cost is 2.2 million



the project is located in a township of haidian district, beijing, adjacent to xiangshan. the total planning land of the project is 18.61 hectares, and the total construction area is 124550 square meters

the total construction area of the first phase project is 1364.17 square meters. the number and height of the building are as follows: 1 floor under the ground, 3 floors above the ground. the cornice height is 11.85 meters

the structural form is frame shear wall structure, the reasonable service life is 50 years, the seismic fortification is 8 degrees, and the fire resistance rating is grade 2

drawing content:

each specialty (architecture, structure, hvac, water supply and drainage, electrical): general plan, plan, elevation, section, stair detail, door and window detail, wall detail, toilet detail, construction drawing, design description, material and practice table and effect drawing




the building area of the first floor is 391.8 square meters, including electrical room, swimming pool, sauna room, bar, storage room, activity room, equipment room, outdoor activity room; the first floor has a building area of 428.25 square meters, including offices, reception hall, chinese style kitchen, rest room, western style kitchen, activity room, dining room and conference room; the second floor has a construction area of 310.24 square meters, प्रिंट के लिए तैयार: नहीं