Use Of A Matched Filter For DS Receiver Synchronization In An AWGN Channel With Continuous And Pulsed Tone Jamming. Published in: IEEE International ...
ABSTRACT - This paper introduces some simulation results regarding a DS spread spectrum system in which the principle of matched filter synchronization for.
The theoretical analysis and simulation of the performance of a matched filter code acquisition structure with a median filter as the aiding device to canc.
Performance comparison of DS signal matched filter acquisition using median filter and transversal filter as an aiding device in pulsed tone jamming.
Acquisition is performed by means of a matched filter or matched filter and reference filter, and synchronization pulses are integrated recursively over ten...
May 12, 2013 · The matched filter is the optimal linear filter for maximizing the signal to noise ratio (SNR) in the presence of additive stochastic noise.
Missing: DS Tone
The theoretical analysis and simulation of the performance of a matched filter code acquisition structure with a median filter as the aiding device to ...
Chapter HI covers noise and its effects on digital receivers. The matched filter and correlation receivers, coherent and noncoherent detection, probability of ...
Jul 17, 2018 · The SNR at the output of the matched filter will be maximized when the filter lines up with the point of reception of the signal that the filter matches.
Missing: DS Synchronization Continuous Tone Jamming.
May 31, 2021 · A partial-band noise jammer spreads Gaussian noise of total power J evenly over a part of the. total frequency range of the spreading ...