Nothing Special   »   [go: up one dir, main page]

×
Please click here if you are not redirected within a few seconds.
Eliminating the negative resistance cell within the VCO allows us to reduce the overall power consumption for a design that combines a VCO with a follow-on ...
Power Optimized LC VCO & Mixer Co-design. Byunghoo Jung, Shubha Bommalingaiahnapallya, and Ramesh Harjani. Dept of ECE, University of Minnesota, MN 55455, USA.
In other words, the mixer and VCO when co-designed can result in a significantly more optimal design. This paper presents the design for a prototype 4 GHz LC ...
The design for a prototype 4 GHz LC VCO and a mixer that has been designed for a 5 GHz RF and 1 GHz IF radio application in the 0.18 /spl mu/m TSMC CMOS ...
In other words, the mixer and VCO when co-designed can result in a significantly more optimal design. This paper presents the design for a prototype 4 GHz LC ...
Power optimized LC VCO and mixer co-design. Byunghoo Jung Shubha Bommalingaiahnapallya Ramesh Harjani. Published in: ISCAS (5) (2005). Keyphrases.
A low-power low-voltage CMOS receiver architecture with a combined LNA-VCO-mixer structure is proposed. An inversion-coefficient (IC) based design procedure ...
This paper presents the design for a prototype 1.721 GHz LC VCO, mixer ... Power optimized LC VCO & mixer co-design. Conference Paper. Jun 2005.
Co-authors ; Power optimized LC VCO and mixer co-design. B Jung, S Bommalingaiahnapallya, R Harjani. 2005 IEEE International Symposium on Circuits and Systems ( ...
Power optimized LC VCO and mixer co-design. B Jung, S Bommalingaiahnapallya, R Harjani. 2005 IEEE International Symposium on Circuits and Systems (ISCAS) ...