The proposed non-linear model is used to study the effect of static charge on the pull-in of three microstructures, namely cantilever, clamped-clamped, and ...

Abstract. Electrostatic actuation of micro-structures is largely affected by static charges, leading to its unpredictable behavior.

Ths paper provides theoretical pull-in analysis for the static behavior of a optical switch model. It is derived from analytical modeling of the parallel plate ...

Analysis of static charge induced pull-in of an electrostatic MEMS · Mithlesh Kumar, B. Mukherjee, S. Sen · Published in Communications in nonlinear… 2021 ...

Aug 5, 2021 · In this research, we investigate the structural behavior, including the snap-through and pull-in instabilities, of in-plane microelectromechanical COSINE- ...

This paper provides theoretical pull-in analysis for the static behavior of a optical switch model. It is derived from analytical modeling of the parallel plate ...

Missing: induced | Show results with:induced

The pull-in effect is a widely studied phenomenon in the presented article. The obtained voltage characteristics generally show a tendency towards a drop in the ...

The pull-in voltage of one- and two-degrees-of-freedom (DOF) structures has been symbolically and numerically analyzed with respect to drive mode dependence ...

Sep 29, 2019 · A MEMS capacitive sensor is basically an electrostatic transducer and an analytical approach is used to model a MEMS-based capacitive-type ...