The DEM simulation generates an input file for FEM simulation, which is then used to analyse the CRS and resulting roughness corresponding to SP parameters.

A combined simulation is capable of simulating SP processing more realistically without reducing the impact number. Regarding the simulations for two other ...

Jan 1, 2018 · The DEM simulation generates an input file for FEM simulation, which is then used to analyse the CRS and resulting roughness corresponding to SP ...

Semantic Scholar extracted view of "An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation" by Jia-bin Zhang et al.

An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation. https://doi.org/10.1016/j.advengsoft.2017.10.001.

Jun 26, 2024 · An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation. 94. 所属单位：机电学院.

The present study aims to challenge the existing finite element models in terms of one of the most important practical parameters, i.e. coverage.

On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments · 119 Citations.

Oct 8, 2018 · In this study, ANSYS/LS-DYNA software was used to simulate the impact of steel shots of various sizes on 2618-T61 aluminium alloy plate ...

In this paper, an attempt has been made to address this issue by using the discrete element method (DEM) in combination with the finite element method (FEM)