A low-voltage, low-power mixer operating at a supply voltage of 0.9 V while consuming 4.7 mW is presented. The circuit achieves the multiplication using ...

The downconversion mixer is one of the indispensable analog blocks in communications receivers, where its main function is to translate the incoming RF signal ...

A low-voltage, low-power mixer operating at a supply voltage of 0.9 V while consuming 4.7 mW is presented. The circuit achieves the multiplication using ...

This paper discusses the design of a 2.4 GHz operated, ultra-low power CMOS down-converting active mixer based on double balanced Gilbert-cell resistor-loaded ...

A 900MHz high linearity low power and low noise mixer is designed in TSMC 0.18-μm CMOS process. By exploiting the merit of capacitor cross-coupling (CC) ...

Apr 30, 2020 · The mixer achieves maximum conversion gain of 13.95 dB, 1 dB compression point (P1dB) of -19.91 dBm, the third order Input Intercept point (IIP3) ...

This paper presents a 900MHz low voltage, low power down-convenion mixer with high linearity for direct- conversion receivers.

This mixer was designed to downconvert a 2.4GHz RF signal to a. 1 OOMHz IF signal. The simulated performance characteristics showed a power consump- tion of 640 ...

An ultra low power and low voltage down conversion mixer is presented in this paper for the frequency band of 1.8–2.4 GHz. Designed in 0.18 μ m CMOS ...

This paper presents simulation results of an active down-conversion Mixer used in a frequency-hopped spread-spectrum receiver operating in the 863-870 MHz ...