This document specifies the code point to be used in the Segment ID sub-TLV and Downstream Detailed Mapping (DDMAP) TLV when the Interior Gateway Protocol (IGP ...
OSPFv3 Code Point for MPLS LSP Ping - IETF Datatracker
datatracker.ietf.org › doc › draft-ietf-mpl...
OSPFv3 Code Point for MPLS LSP Ping draft-ietf-mpls-lsp-ping-ospfv3-codepoint-06 ; This is an older version of an Internet-Draft that was ultimately published as ...
OSPFv3 CodePoint for MPLS LSP Ping (Internet-Draft, 2020) ... RFC8287 defines the code point ... [RFC8287] defines the code point for different Interior Gateway ...
Apr 1, 2022 · This document specifies the code point to be used in the Segment ID sub-TLV and Downstream Detailed Mapping (DDMAP) TLV when the Interior Gateway Protocol (IGP ...
Apr 1, 2022 · RFC 8287 defines the code points for Open Shortest Path First (OSPF) and Intermediate System to Intermediate System (IS-IS) protocols. This ...
... code point is assigned that is not also assigned in the Next Hop Address Type Registry, the code point there must be marked "Reserved". </note> <record> ...
Check the operability of MPLS label-switched path (LSP) endpoint connections. Type Ctrl+c to interrupt a ping mpls command.
Missing: OSPFv3 | Show results with:OSPFv3
The ping command, with mpls keyword option, can be used to verify data plane connectivity across an LSP. This is useful because not all failures can be detected ...
[要約] RFC 9214 は、MPLS LSP Ping における OSPFv3 のコードポイントを定義し、RFC 8287 を更新して OSPFv2 と OSPFv3 の区別を明確にします。
The MPLS LSP Ping, Traceroute, and AToM VCCV feature can detect when an LSP fails to deliver user traffic. You can use MPLS LSP Ping to test LSP connectivity ...
Missing: OSPFv3 | Show results with:OSPFv3