Nothing Special   »   [go: up one dir, main page]
Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

nordvpn issue #163

Open
caiotizio opened this issue Feb 18, 2023 · 2 comments
Open

nordvpn issue #163

caiotizio opened this issue Feb 18, 2023 · 2 comments

Comments

@caiotizio
Copy link
caiotizio commented Feb 18, 2023 •
edited
Loading

i'm running linuxmint 21.1. when nordvpn is up warpinator isn't visible to other lan devices. nordvpn is set to whitelist the local subnet. other apps works fine.
warpinator get the vpn server ip instead of local one.
Schermata del 2023-02-18 15-25-58

`dr@asus:~$ ifconfig
enp4s0f1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Loopback locale)
RX packets 7852 bytes 1014565 (1.0 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7852 bytes 1014565 (1.0 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

nordlynx: flags=81<UP,POINTOPOINT,RUNNING> mtu 1420
inet 10.5.0.2 netmask 255.255.255.255 destination 10.5.0.2
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 21400 bytes 27228224 (27.2 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11818 bytes 1616632 (1.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.19 netmask 255.255.255.0 broadcast 192.168.1.255
ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
RX packets 187047 bytes 218327239 (218.3 MB)
RX errors 0 dropped 6 overruns 0 frame 12982
TX packets 120973 bytes 27441657 (27.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 18
`
@caiotizio
Copy link
Author

i found how to change the connection interface but still doesn't connect

@ravenn37
Copy link

Same issue here. When connected to nordvpn, Warpinator will eventually discover devices but will not connect to them, showing "Waiting for two-way connection" and "Unable to connect" repeatedly. Devices are on the same network and can ping each other. Disconnecting from the VPN fixes the problem. Interestingly, when file transfer is already running, you can connect to nordvpn and the transfer will continue.

I found a simple workarond that allows you to use Warpinator without disconnecting the VPN:

# Create a group called warpinator
sudo addgroup warpinator
​
# Add yourself to the group
sudo adduser $USER warpinator
​
# Create iptables rule for the group that overrides nordvpn rules
sudo iptables -I OUTPUT 1 -m owner --gid-owner warpinator -j ACCEPT
​
# To run warpinator, execute:
sg warpinator -c warpinator

Now go to Preferences → Connection and select your intended network interface to use.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@caiotizio @ravenn37