use with SocketCAN
sudo modprobe can
sudo modprobe can-raw
sudo modprobe slcan
# configure CAN interface
sudo slcan_attach -s8 -o /dev/ttyACM0
sudo slcand ttyACM0 slcan0
sudo ifconfig slcan0 up
# use with can-utils
cansend slcan0 123#2a
candump slcan0
# make sure all submodules are initialized
git submodule update --init
# building
make
# flashing using USB DFU
# to enter DFU mode, press the button while plugging USB in.
make dfu
- 'T', 't', 'R', 'r': send CAN frames
- 'Sx': set bitrate
- 'O': open channel
- 'l', 'L': open in loop back or silent mode
- 'C': close channel
- 'V', 'v': hardware and software version
- 'P', 'p': turn bus power on and off respectively. This is a proprietary extension to the SLCAN protocol. A tool is included to make use of this feature.