Replies: 8 comments 23 replies
-
These are brand new devices and we are in the process of adding support for these boards. You can install the development version from https://nightly.openhasp.com/
Yes, this is normal. Please select the correct port to flash the panel. Also check the "Erase Flash" option. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. I will give that a try.
…On Mon, Jan 2, 2023, 8:29 PM fvanroie ***@***.***> wrote:
I have tried the varies esp32 flash's listed on the web install page. Each
one says it does not support esp32-S3.
These are brand new devices and we are in the process of adding support
for these boards. You can install the development version from
https://nightly.openhasp.com/
Btw when I try to flash it, it shows the com port and not the name of the
panel
Yes, this is normal. Please select the correct port to flash the panel.
Also check the "Erase Flash" option.
—
Reply to this email directly, view it on GitHub
<#413 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AE6KFAHMRJBNSI4SBGGLQ6DWQMUBPANCNFSM6AAAAAATO7DQNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Unfortunately, none of the nightlies worked for me.
…On Mon, Jan 2, 2023 at 8:37 PM Kevin Zimmerman ***@***.***> wrote:
Thank you. I will give that a try.
On Mon, Jan 2, 2023, 8:29 PM fvanroie ***@***.***> wrote:
> I have tried the varies esp32 flash's listed on the web install page.
> Each one says it does not support esp32-S3.
>
> These are brand new devices and we are in the process of adding support
> for these boards. You can install the development version from
> https://nightly.openhasp.com/
>
> Btw when I try to flash it, it shows the com port and not the name of the
> panel
>
> Yes, this is normal. Please select the correct port to flash the panel.
> Also check the "Erase Flash" option.
>
> —
> Reply to this email directly, view it on GitHub
> <#413 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AE6KFAHMRJBNSI4SBGGLQ6DWQMUBPANCNFSM6AAAAAATO7DQNY>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
|
You don't have to try them all... just the one specific to your board. |
Beta Was this translation helpful? Give feedback.
-
|
Here is the link to the board https://es.aliexpress.com/item/1005004952726089.html?spm=a2g0o.order_list.order_list_main.5.21ef194d2vFigv&gatewayAdapt=glo2esp On the back it has: ESP32-8048S070 I do not see this listed, so I have tried various ones, the GS-T3E flashes and connects to the wifi, but does not display. I understand this is most likely an incorrect file. |
Beta Was this translation helpful? Give feedback.
-
|
Hi. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, EDIT: this is how I placed the aluminum tab. With just this piece of aluminum, the esp32 works great. I have turned on the ESP several times and it boots directly to OpenHASP and everything works. No latency or loss of WiFi, in my opinion it's part of the chipset that is poorly protected from interference. |
Beta Was this translation helpful? Give feedback.
-
|
@WarC0zes can you share your settings please? |
Beta Was this translation helpful? Give feedback.
-
|
you can find my config on this page https://forum.hacf.fr/t/openhasp-utilizer-un-esp-avec-ecran-tactile-pour-controler-home-assistant/32713 |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @WarC0zes and @romainrossi |
Beta Was this translation helpful? Give feedback.
-
|
SUCCESS!!!!!
Thank you.
I had purposely not used the Sunton.
Thank you again. I am looking forward to seeing what all I can do with
Openhasp.
…On Tue, Jan 3, 2023 at 12:38 PM Tepeinc ***@***.***> wrote:
Hello kzim200!
I think I have the same board, but it's branded Sunton. It looks the same.
Link here:
https://www.aliexpress.com/item/1005004952726089.html?spm=a2g0o.order_list.order_list_main.65.21ef1802FLUjG4
I flashed it with Sunton-8048s070c_16MB firmware from nightly build and it
is working. It's not working 100% and I think I have a problem in power
feed. I think it might need more power than my USB2 or USB3 can deliver
because it's disconnecting randomly... Can you try that Sunton firmware?
Maybe fvanroie can confirm this?
—
Reply to this email directly, view it on GitHub
<#413 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AE6KFAGINHPSL6LNJ6INRV3WQQFURANCNFSM6AAAAAATO7DQNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Just got my Sunton7 from aliexpress and got the board flashed and running. Do you know if it supports Dimming and what GPIO Pin should i select in the display settings ? |
Beta Was this translation helpful? Give feedback.
-
|
It indeed supports dimming on |
Beta Was this translation helpful? Give feedback.
-
|
How do I select GPIO2? It's not available in the list. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
Yes, the version you are using works. |
Beta Was this translation helpful? Give feedback.
-
|
The screen off control also does not work on the Sunton 8048S050C board. |
Beta Was this translation helpful? Give feedback.
-
|
help plz i dont know what im doing |
Beta Was this translation helpful? Give feedback.
-
|
I updated https://nightly.openhasp.com/ to r0.7.0-rc10, that should fix the backlight dimming bug. |
Beta Was this translation helpful? Give feedback.
-
|
Yes, I can confirm that the Sunton 8048S050C display with |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I bought this panel and i'm trying to add an external UART device connected to the top connector labeled P4, it should be connected to UART1 but when i try to use Serial1 in my code the screen suddenly shift to a greenish color and the serial can't connect to the sensor. Does anyone knows if UART1 is connected to something else except for the JST header? If so where can I connect my sensor? |
Beta Was this translation helpful? Give feedback.
-
I bought this panel ESP32-S3-pantalla inteligente HMI 8M PSRAM 16M Flash. It is the one you posted a link to during Dr Z's live stream.
I have tried the varies esp32 flash's listed on the web install page. Each one says it does not support esp32-S3. Btw when I try to flash it, it shows the com port and not the name of the panel
Beta Was this translation helpful? Give feedback.
All reactions