In the United States and Canada, plugs can come in two variants. These variants are called Type A and Type B plugs. In this article, we will take a look at both types of plugs and show you a step-by-step process to wire them both. We will also look at the tools that are required to wire a plug and also answer some faqs.
But let’s start by taking a look at the difference between a Type A and Type B plug or socket.
What is the difference between a type A and type b plug?
The main difference between a Type A and Type B style plug is that Type B plugs feature 3 pins whereas Type A plugs only feature two pins. This is because Type B plugs feature a pin for grounding. The third pin on Type B plugs will go into the ground that is located in the socket.
Type A plugs are compatible with Type A and B sockets whereas Type B plugs are only compatible with Type B sockets.
What will I need?
When wiring a plug you only require a few simple tools. The tools required are:
- A terminal screwdriver
- Wire cutters
- A stanley knife
We have linked to some of our favorite tools that we use in industry and that would be suitable for wiring a plug. Please note, that we may make a small commission if you purchase any tools using our links.
Terminal screwdriver
Side cutters
Stanley knife
How to Wire a Type A Plug
We will now take a look at all of the steps that are necessary to wire a Type A plug. Type A plugs only feature two pins and only require two wires (live/hot and a neutral). Type A plugs can generally be found on double insulated home appliances such as radios, clocks, and lamps.
Preparing the plug
If you are replacing a plug then you will need to remove the old plug first. Make sure everything is unplugged and removed from any power supply and remove the plug by unscrewing the retaining screws using a screwdriver located on the plug’s head. This will expose the terminals where your wires will need to be situated.
If you have a new plug you will still need to open the plug head to gain access to where the cable terminations are made. Use a screwdriver to remove the screws.
Preparing the cable
If you are replacing a plug then the cable may not need preparing if it is in good condition. You should check that adequate copper is exposed to make a solid connection in the plugs terminals. You should also check for any exposed copper if the insulation is damaged, If the insulation is damaged the cable should be stripped back (using your side cutters) to where the insulation is intact.
If you have a new cable then you still need to strip back enough cable to allow for connections to be made inside the plug. A good tip is to hold the cable about 3/4 over the plug head to estimate roughly how much cable you will need.
Connect the wires
Once you have prepared the plug and cable it is now time to connect the wires to the correct terminals. When using a Type A plug there are only two wires to connect. You have the live (hot) wire which is black in color and the neutral which is white in color. In older plugs, the pins were symmetrical so you had to look at the internal markings to know where to terminate the wires. In newer plugs today the neutral conductor is identified by a slightly wider pin. The new design will not fit older sockets but they should be used as they remove the chance of fitting the plug the wrong way round.
Below you can see a diagram of how to terminate the connections inside the plug.
Close the plug
Once you have wired the cable correctly it is time to close the plug back up. You should ensure that all terminations are tight and no wires are overlapping the casing of the plug. The cable should be routed correctly to allow for the casing to be closed correctly.
Push both sides of the plug housing together and secure using the screws.
And there you have it! That is how you wire a Type A plug.
How to Wire a Type B Plug
We will now take a look at all of the steps that are necessary to wire a Type B plug. Type B plugs have three pins and require three wires (live/hot, neutral, and earth/ground). The ground pin on a Type B plug is longer than the other pins, this is so the electrical device is grounded before the power supply is connected.
If you look at any US or Canadian socket you will see the earth socket at the bottom, the live/hot socket on the right, and the neutral located on the left.
Preparing the plug
If you are replacing a plug then you will need to remove the old plug first. Make sure everything is unplugged and removed from any power supply and remove the plug by unscrewing the retaining screws using a screwdriver located on the plug’s head. This will expose the terminals where your wires will need to be situated.
If you have a new plug you will still need to open the plug head to gain access to where the cable terminations are made. Use a screwdriver to remove the screws.
Preparing the cable
If you are replacing a plug then the cable may not need preparing if it is in good condition. You should check that adequate copper is exposed to make a solid connection in the plugs terminals. You should also check for any exposed copper if the insulation is damaged, If the insulation is damaged the cable should be stripped back (using your side cutters) to where the insulation is intact.
If you have a new cable then you still need to strip back enough cable to allow for connections to be made inside the plug. A good tip is to hold the cable about 3/4 over the plug head to estimate roughly how much cable you will need.
Connect the wires
Once you have prepared the plug and cable it is now time to connect the wires to the correct terminals. There are three different wires that you will need to terminate when wiring a Type B plug. The live/hot should be connected to the black wire, the neutral to the white, and the ground wire to the green. Like Type A plugs the neutral pin has been made slightly wider than the live/hot wire. Type B plugs feature a middle pin that is used to ground the system. By using a middle pin it ensures that the plugs can only be put in the correct way up.
Below you can see a diagram of how to terminate the connections inside a Type B plug.
Close the plug
Once you have wired the cable correctly it is time to close the plug back up. You should ensure that all terminations are tight and no wires are overlapping the casing of the plug. The cable should be routed correctly to allow for the casing to be closed correctly.
Push both sides of the plug housing together and secure using the screws.
And there you have it! That is how you wire a Type B plug.
Where Are Type A and Type B Plugs Used?
Type A and Type B plugs are mainly used in the United States and Canada. They can however be found in Mexico and Japan.
Can you use a Type A plug with a Type B socket?
Yes, you can use a Type A plug with a Type B socket.
Can you use a Type B Plug with a Type A Socket?
No, you cannot use a Type B plug with a Type A socket. This is because Type B plugs have three pins and Type A sockets only have sockets for two pins.
Can you Use Type A and Type B Plugs In The United Kingdom?
Without an adaptor, you cannot use Type A and Type B plugs in the United Kingdom. If you are looking to wire a plug in the UK check out our article here.
Hi, I’m Liam, the founder of Engineer Fix. Drawing from my extensive experience in electrical and mechanical engineering, I established this platform to provide students, engineers, and curious individuals with an authoritative online resource that simplifies complex engineering concepts.
Throughout my diverse engineering career, I have undertaken numerous mechanical and electrical projects, honing my skills and gaining valuable insights. In addition to this practical experience, I have completed six years of rigorous training, including an advanced apprenticeship and an HNC in electrical engineering. My background, coupled with my unwavering commitment to continuous learning, positions me as a reliable and knowledgeable source in the engineering field.