List of state highway loops in Texas (500–9999)

State Highway Loop 500
Location	Shelby County
Length	1.021 mi[1] (1.643 km)
Existed	April 29, 1971–present

Loop 500 is located in Shelby County. It runs from US 96 northwest of Center to SH 7 southwest of Center.

Loop 500 was designated on April 29, 1971, as a loop off SH 7 in Center. On August 26, 2010, the northern section was extended west 2.9 miles (4.7 km) to US 96 northwest of Center.

State Highway Loop 505
Location	Newton County
Length	3.654 mi[2] (5.881 km)
Existed	August 31, 1972–present

Loop 505 is located in Newton County. It runs from SH 87 northeast of Newton to SH 87 southwest of Newton.

Loop 505 was designated on August 31, 1972, on the current route along an old routing of SH 87; the route was signed as SH 87 Business rather than Loop 505.

State Highway Loop 506
Location	Wise County
Existed	May 31, 1972[3]–June 21, 1990

Loop 506 was located in Wise County. It is now Bus. US 81.

State Highway Loop 507
Location	Brazos County
Existed	August 31, 1972[4]–June 21, 1990

Loop 507 was designated on August 31, 1972, as a loop off SH 6 in Bryan-College Station. The route was signed as SH 6 Business rather than Loop 507. On June 21, 1990, Loop 507 was cancelled and transferred to Bus. SH 6.

State Highway Loop 508
Location	Grimes County
Existed	August 31, 1972[5]–June 21, 1990

Loop 508 was designated on August 31, 1972, as a loop off SH 6 in Navasota. The route was signed as SH 6 Business rather than Loop 508. On June 21, 1990, Loop 508 was cancelled and transferred to Bus. SH 6.

State Highway Loop 509
Location	Collin County
Existed	July 31, 1972[6]–June 21, 1990

Loop 509 was designated on July 31, 1972, as a loop off SH 78 in Copeville along an old routing of SH 78. on June 21, 1990, Loop 509 was cancelled and transferred to Bus. SH 78.

State Highway Loop 512
Location	Montgomery County
Existed	November 3, 1972[7]–June 21, 1990

Loop 512 was designated on November 3, 1972, as a loop off US 59 in Splendora along an old routing of US 59. The route was signed as US 59 Business rather than Loop 512. On June 21, 1990, Loop 512 was cancelled and transferred to Bus. US 59.

State Highway Loop 513
Location	Guadalupe County
Existed	September 4, 1973[8]–June 21, 1990

Loop 513 was designated on September 4, 1973, as a loop off SH 123 in Seguin along an old routing of SH 123. The route was signed as SH 123 Business rather than Loop 513. On June 21, 1990, Loop 513 was cancelled and transferred to Bus. SH 123.

State Highway Loop 516
Location	Bee County
Existed	May 31, 1973[9]–June 21, 1990

Loop 516 was designated on May 31, 1973, as a loop off US 181 in Beeville along an old routing of US 181. The route was signed as US 181 Business rather than Loop 516. On June 21, 1990, Loop 516 was cancelled and transferred to Bus. US 181.

State Highway Loop 517
Location	Dimmit County
Length	2.694 mi[10] (4.336 km)
Existed	June 20, 1975–present

Loop 517 is located in Dimmit County. It runs from US 83 northeast of Carrizo Springs to US 277 northwest of Carrizo Springs.

Loop 517 was designated on June 20, 1975, on the current route.

State Highway Loop 518
Location	Bell County
Existed	November 25, 1975–June 21, 1990[11]

Loop 518 was designated on November 25, 1975, as a loop off US 190 in Killeen along an old routing of US 190. The route was signed as US 190 Business instead of Loop 518. On June 21, 1990, Loop 518 was cancelled and transferred to Bus. US 190.

State Highway Loop 519
Location	Culberson County
Existed	November 25, 1975–June 21, 1990[12]

Loop 519 was located in Culberson County. It was the former alignment of US 80 through Van Horn. It is now Business I-10.

State Highway Loop 520
Location	Hill County
Existed	November 25, 1975–June 21, 1990[13]

Loop 520 was designated on November 25, 1975, as a loop off SH 171 in Covington along an old routing of SH 171. On June 21, 1990, Loop 520 was cancelled and transferred to Bus. SH 171.

State Highway Loop 521
Location	Jackson County
Length	3.442 mi[14] (5.539 km)
Existed	June 30, 1976–present

Loop 521 is located in Jackson County. It runs from US 59 east of Edna to US 59 west of Edna.

Loop 521 was designated on June 30, 1976, on the current route along an old routing of US 59.

State Highway Loop 522
Location	Jackson County
Length	2.571 mi[15] (4.138 km)
Existed	June 30, 1976–present

Loop 522 is located in Jackson County. It runs from US 59 east of Ganado to US 59 west of Ganado.

Loop 522 was designated on June 30, 1976, on the current route along an old routing of US 59; the route was signed as US 59 Business rather than Loop 522.

State Highway Loop 523
Location	Wharton County
Length	3.006 mi[16] (4.838 km)
Existed	June 21, 1979–present

Loop 523 is located in Wharton County. It runs from US 59, 1.3 miles (2.1 km) west of Louise to US 59, 1.8 miles (2.9 km) east of Louise.

Loop 523 was designated on June 21, 1979, on the current route.

State Highway Loop 524
Location	Wharton County
Length	1.372 mi[17] (2.208 km)
Existed	June 30, 1976–present

Loop 524 is located in Wharton County. It runs from US 59 east of Hillje to US 59 west of Hillje.

Loop 524 was designated on June 30, 1976, on the current route along an old routing of US 59; the route was signed as US 59 Business rather than Loop 524.

State Highway Loop 525
Location	Wharton County
Existed	June 30, 1976–April 23, 1997[18]

Loop 525 was designated on August 23, 1976, as a loop off US 59 in El Campo along an old routing of US 59. The route was signed as US 59 Business rather than Loop 525. On April 23, 1997, Spur 525 was cancelled and transferred to Bus. US 59.

State Highway Loop 526
Location	Wharton County
Length	1.439 mi[19] (2.316 km)
Existed	June 30, 1976–present

Loop 526 is located in Wharton County. It runs from I-69/US 59 east of Pierce to I-69/US 59 west of Pierce.

Loop 526 was designated on June 30, 1976, on the current route along an old routing of US 59.

State Highway Loop 528
Location	Ellis County
Existed	August 23, 1976–June 21, 1990[20]

Loop 528 was designated on August 23, 1976, as a loop off US 287 in Waxahachie along an old routing of US 287. The route was signed as US 287 Business rather than Loop 528. On June 21, 1990, Loop 528 was cancelled and transferred to Bus. US 287.

State Highway Loop 530
Location	Bell County
Existed	November 23, 1976–October 26, 2000[21]

Loop 530 was designated on November 23, 1976, as a loop off US 190 in Belton along an old routing of US 190. On October 26, 2000, by district request, Loop 530 was cancelled and removed from the highway system due to the city of Belton planning utility improvements along the route.

State Highway Loop 531
Location	Houston County
Existed	January 20, 1977–July 31, 2003[22]

Loop 531 was located in Grapeland. It is now Bus. US 287.

State Highway Loop 532
Location	La Salle and Webb counties
Existed	January 20, 1977[23]–June 21, 1990

Loop 532 was located in Encinal. It is now Business I-35.

State Highway Loop 533
Location	Palo Pinto County
Length	1.045 mi[24] (1.682 km)
Existed	May 27, 1977–present

Loop 533 is located in Palo Pinto County. Both of its termini are at SH 16.

Loop 533 was designated on May 27, 1977, on the current route along an old routing of SH 16.

State Highway Loop 534
Location	Kerr County
Length	4.968 mi[25] (7.995 km)
Existed	May 2, 1977–present

Loop 534, also known as Veterans Highway, is located in Kerr County. It runs 4.968 miles (7.995 km) from SH 173 south of Kerrville north to I-10.^[25]

Loop 534 was designated on May 2, 1977, from FM 689 (now SH 173) southeast of Kerrville north to I-10. On October 23, 1978, the road was extended southeast 2.1 miles (3.4 km) to SH 16, replacing a section of FM 689 (although this section was signed as SH 173). On October 2, 1990, a 2-mile (3.2 km) section from SH 16 to the southern terminus was transferred to SH 173.^[25]

Junction list

The entire highway is in Kerrville, Kerr County.

mi[26]	km	Destinations	Notes
0.0	0.0	SH 173 (Bandera Highway) – Bandera, Kerrville	Southern terminus
0.2	0.32	Bridge over the Guadalupe River
0.4	0.64	SH 27 (Memorial Boulevard) – Kerrville, Center Point, Comfort	Access to Kerrville Municipal Airport
3.2	5.1	FM 1341 (Cypress Creek Road)
4.3	6.9	SH 16 (Sidney Baker Street) to I-10 – Kerrville, Fredericksburg
4.9	7.9	Leslie Drive	Northern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

State Highway Loop 538
Location	Bexar and Guadalupe counties
Existed	January 24, 1978[27]–June 18, 1996

Loop 538 was designated on January 24, 1978, from FM 78, 0.5 miles (0.80 km) east of SH 218, east and northeast to FM 78 near Live Oak Road (now Schertz Parkway) in Schertz. The route was never built, and was cancelled on June 18, 1996.

State Highway Loop 539
Location	Guadalupe County
Existed	January 24, 1978[28]–November 20, 2014

Loop 539 was designated on January 24, 1978, from FM 78, 0.3 miles (0.48 km) west of FM 1103, east and northeast to FM 78 near Haeckerville Road in Cibolo. On September 26, 1996, the road was rerouted along old FM 78 through Cibolo after FM 78 was rerouted south of town. On November 20, 2014, Loop 539 was cancelled and returned to the city of Cibolo.

State Highway Loop 540
Location	Fort Bend County
Length	3.354 mi[29] (5.398 km)
Existed	April 14, 1980–present

Loop 540 is located in Fort Bend County. It begins northeast of Beasley at an exit ramp off southbound Future I-69/US 59, about 0.3 miles (0.5 km) past the intersection with Daily Road.^[30] Initially one-way, it runs southwest alongside the Union Pacific Railroad tracks. Two-way traffic begins after 0.2 miles (0.3 km). The route passes through Beasley before intersecting FM 1875 southwest of the city. Loop 540 then intersects FM 360, beyond which the road again becomes one-way before transitioning into an entrance ramp for southbound Future I-69/US 59.^[31]

Loop 540 was designated on April 14, 1980, on the current route.

•  
  Beasley Post Office at 1st Street and Loop 540
•  
  Grain storage buildings on Loop 540 in Beasley
•  
  Looking northwest from Loop 540 and FM 1875
•  
  View northeast toward Beasley near Future I-69/US 59

State Highway Loop 541
Location	Fort Bend County
Length	2.526 mi[32] (4.065 km)
Existed	April 14, 1980–present

Loop 541 is located in Fort Bend County. It begins northeast of Kendleton at an exit ramp off southbound Future I-69/US 59. It runs southwest along the Union Pacific Railroad tracks, intersecting FM 2919. Loop 541 continues to the southwest for another 0.6 miles (1.0 km); while the designation has the route connecting to the freeway here, it instead ends at a turnaround. A paved road goes a short distance past the turnaround before turning sharply to the northwest, connecting with Ben Williams Drive after crossing the railroad tracks.^[31]

Loop 541 was designated on April 14, 1980, on the current route.

•  
  Loop 541 sign a short way southwest of the Future I-69/US 59 exit
•  
  Marker on Loop 541 gives the history of Kendleton
•  
  Union Pacific railroad crossing at Loop 541 and FM 2919

State Highway Loop 543
Location	Fayette County
Length	1.665 mi[33] (2.680 km)
Existed	February 7, 1983–present

Loop 543 is located in Fayette County. It runs from SH 71 west of West Point to SH 71 east of West Point.

Loop 543 was designated on February 7, 1983, on the current route along an old routing of SH 71.

State Highway Loop 544
Location	Nolan County
Existed	February 23, 1983[34]–June 21, 1990

Loop 544 was designated on February 23, 1983, as a loop off US 84 in Roscoe. On June 21, 1990, Loop 544 was cancelled and transferred to Bus. US 84.

State Highway Loop 545
Location	Tom Green County
Existed	April 20, 1984[35]–November 21, 1996

Loop 545 was designated on April 20, 1984, from US 67 northeast 5.1 miles (8.2 km) to Main Street, then north along Main Street 0.5 mile to US 67 along an old routing of US 67. On March 29, 1988, a 1.1-mile (1.8 km) section from US 87 to FM 380 was removed and returned to the city of San Angelo. The remainder of Loop 545 was cancelled on November 21, 1996, and transferred to Bus. US 67.

State Highway Loop 546
Location	Midland County
Existed	April 9, 1984[36]–June 21, 1990

Loop 546 was designated on April 9, 1984, from Loop 250 east and south 3.5 miles (5.6 km) to Wall Avenue, then east 1.3 miles (2.1 km) along Wall Avenue to SH 349 (now Bus. SH 349), then south along SH 349 to Florida Avenue, then southeast 2.5 miles (4.0 km) along Florida Avenue and Garden City Highway to I-20/SH 158 along an old routing of SH 158. On June 21, 1990, Loop 546 was cancelled and transferred to Bus. SH 158.

State Highway Loop 547
Location	San Augustine County
Length	1.222 mi[37] (1.967 km)
Existed	July 24, 1984–present

Loop 547 is located in San Augustine County. Both of its termini are at SH 21 within the San Augustine city limits.

Loop 547 was designated on July 24, 1984, on its current route. It is a former routing of SH 21.

State Highway Loop 549
Location	Nolan County
Existed	September 27, 1985[38]–June 21, 1990

Loop 549 was designated on September 27, 1985, from SH 70, 2 miles (3.2 km) west of Sweetwater, south 2 miles (3.2 km) to Loop 432 (now Business I-20). The route was signed, but not designated, as SH 70. Loop 549 was cancelled on June 21, 1990, as the SH 70 designation became official.

State Highway Loop 550
Location	Oldham County
Existed	April 18, 1985[39]–June 21, 1990

Loop 550 was designated on April 18, 1985, as a loop off I-40 in Adrian along an old routing of US 66. On June 21, 1990, Loop 550 was cancelled and transferred to Business I-40-B.

State Highway Loop 551
Location	Oldham County
Existed	April 18, 1985[40]–June 21, 1990

Loop 551 was designated on April 18, 1985, as a loop off I-40 in Vega along an old routing of US 66. On June 21, 1990, Loop 551 was cancelled and transferred to Business I-40-C.

State Highway Loop 552
Location	Potter and Carson counties
Existed	April 18, 1985[41]–October 25, 1990

Loop 552 was designated on April 18, 1985, from I-40 west of Amarillo east, north, and east 9 miles (14 km) to US 60/US 87, then east and northeast 10.8 miles (17.4 km) along US 60 to its intersection with Loop 552, then southeast 4.6 miles (7.4 km) to I-40 along an old routing of US 66. On October 25, 1990, Loop 552 was cancelled and transferred to Business I-40-D.

State Highway Loop 554
Location	Carson and Gray counties
Existed	April 18, 1985[42]–June 21, 1990

Loop 554 was designated on April 18, 1985, as a loop off I-40 in Groom along an old routing of US 66. On June 21, 1990, Loop 554 was cancelled and transferred to Business I-40-F.

State Highway Loop 555
Location	Gray County
Existed	April 18, 1985[43]–June 21, 1990

Loop 555 was designated on April 18, 1985, as a loop off I-40 in McLean along an old routing of US 66. On June 21, 1990, Loop 555 was cancelled and transferred to Business I-40-H.

State Highway Loop 556
Location	Wheeler County
Existed	April 18, 1985[44]–March 24, 1993

Loop 556 was designated on April 18, 1985, as a loop off I-40 in Shamrock along an old routing of US 66. On March 24, 1993, Loop 556 was cancelled and transferred to Business I-40-J.

State Highway Loop 558
Location	Brazoria County
Existed	January 15, 1986[45]–September 29, 1992

Loop 558 was designated on January 15, 1986, from SH 35 southwest and west 4.9 miles (7.9 km) to the intersection of SH 35 and SH 288. On February 25, 1987, the route was transferred to SH 35 and Loop 558 was reassigned to an old routing of SH 35 from SH 288 east 3.7 miles (6.0 km) to SH 35. Loop 558 was cancelled on September 29, 1992, and transferred to FM 523.

State Highway Loop 560
Location	Ellis and Dallas counties
Existed	January 28, 1987[46]–June 21, 1990

Loop 560 was located in Ellis and Dallas counties. It was the former alignment of US 75 through Ferris. It is now Business I-45.

State Highway Loop 561
Location	Ellis County
Length	0.936 mi[47] (1,506 m)
Existed	January 28, 1987–present

Loop 561 is located in Ellis County. It is the former alignment of US 75 through Trumbull. Both of its termini are at I-45.

Loop 561 was designated on January 28, 1987, on the current route.

State Highway Loop 562
Location	Ellis County
Existed	January 28, 1987[48]–June 21, 1990

Loop 562 was located in Ellis County. It was the former alignment of US 75 through Palmer. It is now Business I-45.

State Highway Loop 564
Location	Wood County
Length	9.800 mi[49] (15.772 km)
Existed	March 25, 2010–present

Loop 564 encircles Mineola.

Loop 564 was designated on March 25, 2010, on the current route as a replacement of FM 564.

State Highway Loop 564
Location	Navarro County
Existed	January 28, 1987[49]–June 21, 1990

A previous route designated Loop 564 was located in Navarro County. It was the former alignment of US 75 through Corsicana. It is now Business I-45.^[49]

State Highway Loop 566
Location	Haskell and Jones counties
Existed	May 2, 1988[50]–June 21, 1990

Loop 566 was designated on May 2, 1988, from US 287/SH 283, south along SH 6, then west to US 277 along an old routing of US 277. On June 21, 1990, Loop 566 was cancelled and transferred to Bus. US 277.

State Highway Loop 567
Location	Hood County
Length	4.035 mi[51] (6.494 km)
Existed	November 25, 1986–present

Loop 567 is located in Hood County. It runs from US 377 west of Granbury to Bus. US 377 east of Granbury.

Loop 567 was designated on November 25, 1986, from US 377 west of Granbury northeast to FM 51 north of town. On May 25, 2000, by district request, the road was extended 2.25 miles (3.62 km) east and south to Bus. US 377.

State Highway Loop 569
Location	Wise County
Existed	April 23, 1987[52]–June 21, 1990

Loop 569 was designated on April 23, 1987, as a loop off US 380 in Decatur along an old routing of US 380. On June 21, 1990, Loop 569 was cancelled and transferred to Bus. US 380.

State Highway Loop 570
Location	Tom Green County
Length	1.903 mi[53] (3.063 km)
Existed	March 19, 1990–present

Loop 570 is located in Tom Green County. It is the former route of US 87 through Wall.

State Highway Loop 571
Location	Rusk County
Length	5.902 mi[54] (9.498 km)
Existed	September 29, 1987–present

Loop 571 is located in Rusk County. It runs from US 259 north of Henderson to US 79 south of Henderson.

Loop 571 was designated on September 29, 1987, on the current route as a replacement of FM 454.

State Highway Loop 573
Location	Liberty County
Length	3.159 mi[55] (5.084 km)
Existed	December 31, 1987–present

Loop 573 is located in Liberty County. It runs from I-69/US 59 north of Cleveland to I-69/US 59 south of Cleveland.

Loop 573 was designated on December 31, 1987, on the current route along an old routing of US 59.

State Highway Loop 574
Location	McLennan County
Length	1.500 mi[56] (2.414 km)
Existed	December 21, 1987–present

Loop 574 is located in McLennan County. It runs from I-35 to Loop 484.

Loop 574 was designated on December 21, 1987, on the current route.

State Highway Loop 577
Location	Concho County
Length	1.063 mi[57] (1.711 km)
Existed	October 6, 1991–present

Loop 577 is located in Concho County. It is the former route of US 87 through Vick.

State Highway Loop 590
Location	Cameron County
Existed	April 26, 1989[58]–December 21, 1994

Loop 590 was designated on April 26, 1989, from US 77 south and southwest 13.9 miles (22.4 km) along Helen Moore Road (now Paso Real Highway) to US 77/US 83 (now I-69E). On December 21, 1994, Loop 590 was cancelled and redesignated as FM 509 to provide a continuous route for FM 509.

State Highway Loop 592
Location	Bell County
Length	0.700 mi[59] (1,127 m)
Existed	May 24, 1990–present

Loop 592 is located in Bell County. It runs from US 190/I-14 east of Nolanville to US 190/I-14 at Paddy Hamilton Road. The route is unsigned.

Loop 592 was designated on May 24, 1990, on the current route.

State Highway Loop 593
Location	Hunt County
Existed	January 29, 1991[60]–July 15, 1992

Loop 593 was a proposed route in Hunt County. It was designated on January 29, 1991, from US 69 in Greenville south and east 5.2 miles (8.4 km) to SH 34. However, the city of Greenville rejected construction of the route, and the designation was cancelled on July 15, 1992.

State Highway Loop 635
Location	Dallas and Tarrant counties
Existed	April 1, 1968[61]–July 31, 1974

Loop 635 was located in Dallas and Tarrant counties. It was the temporary designation for the northwestern segment of I-635 from 1968 to 1974.

State Highway Loop 820
Location	Tarrant County
Existed	April 18, 1963[62]–July 13, 1977

Loop 820 was located in Tarrant County. It was the temporary designation for segments of I-820 from 1963 to 1977.

State Highway Loop 1604
Location	Bexar County
Length	94.387 mi[63] (151.901 km)
Existed	June 30, 1977–present

Loop 1604 serves as the outer highway loop of San Antonio. At nearly 95 miles (153 km) in length, Loop 1604 is the longest state highway loop in Texas.

State Highway Loop 1853
Location	Madison County
Length	7.3 mi[72] (11.7 km)
Existed	April 30, 2020–present

Loop 1853 is a proposed loop around the south side of Madisonville as a relief route for SH 21, which is routed through the city. It is proposed to run from US 190/SH 21, 0.7 miles (1.1 km) east of FM 1452, to another point on SH 21, 0.4 miles (0.6 km) west of FM 2346.

Loop 1853 is expected to have two lanes in each direction with four overpasses, at SH 90, SH 75, I-45, and a city-owned road.^{[citation needed]} TxDOT projects construction to begin in 2026.^{[citation needed]}

The number was chosen to commemorate the year that Madison County was established.^[73]