Grayscale

The intensity of a pixel is expressed within a given range between a minimum and a maximum, inclusive. This range is represented in an abstract way as a range from 0 (or 0%) (total absence, black) and 1 (or 100%) (total presence, white), with any fractional values in between. This notation is used in academic papers, but this does not define what "black" or "white" is in terms of colorimetry. Sometimes the scale is reversed, as in printing where the numeric intensity denotes how much ink is employed in halftoning, with 0% representing the paper white (no ink) and 100% being a solid black (full ink).

In computing, although the grayscale can be computed through rational numbers, image pixels are usually quantized to store them as unsigned integers, to reduce the required storage and computation. Some early grayscale monitors can only display up to sixteen different shades, which would be stored in binary form using 4 bits.^{[citation needed]} But today grayscale images intended for visual display are commonly stored with 8 bits per sampled pixel. This pixel depth allows 256 different intensities (i.e., shades of gray) to be recorded, and also simplifies computation as each pixel sample can be accessed individually as one full byte. However, if these intensities were spaced equally in proportion to the amount of physical light they represent at that pixel (called a linear encoding or scale), the differences between adjacent dark shades could be quite noticeable as banding artifacts, while many of the lighter shades would be "wasted" by encoding a lot of perceptually-indistinguishable increments. Therefore, the shades are instead typically spread out evenly on a gamma-compressed nonlinear scale, which better approximates uniform perceptual increments for both dark and light shades, usually making these 256 shades enough to avoid noticeable increments.^[2]

Technical uses (e.g. in medical imaging or remote sensing applications) often require more levels, to make full use of the sensor accuracy (typically 10 or 12 bits per sample) and to reduce rounding errors in computations. Sixteen bits per sample (65,536 levels) is often a convenient choice for such uses, as computers manage 16-bit words efficiently. The TIFF and PNG (among other) image file formats support 16-bit grayscale natively, although browsers and many imaging programs tend to ignore the low order 8 bits of each pixel. Internally for computation and working storage, image processing software typically uses integer or floating-point numbers of size 16 or 32 bits.

 

Conversion of an arbitrary color image to grayscale is not unique in general; different weighting of the color channels effectively represent the effect of shooting black-and-white film with different-colored photographic filters on the cameras.

A common strategy is to use the principles of photometry or, more broadly, colorimetry to calculate the grayscale values (in the target grayscale colorspace) so as to have the same luminance (technically relative luminance) as the original color image (according to its colorspace).^[3][4] In addition to the same (relative) luminance, this method also ensures that both images will have the same absolute luminance when displayed, as can be measured by instruments in its SI units of candelas per square meter, in any given area of the image, given equal whitepoints. Luminance itself is defined using a standard model of human vision, so preserving the luminance in the grayscale image also preserves other perceptual lightness measures, such as L^* (as in the 1976 CIE Lab color space) which is determined by the linear luminance Y itself (as in the CIE 1931 XYZ color space) which we will refer to here as Y_linear to avoid any ambiguity.

To convert a color from a colorspace based on a typical gamma-compressed (nonlinear) RGB color model to a grayscale representation of its luminance, the gamma compression function must first be removed via gamma expansion (linearization) to transform the image to a linear RGB colorspace, so that the appropriate weighted sum can be applied to the linear color components (${\displaystyle R_{\mathrm {linear} },G_{\mathrm {linear} },B_{\mathrm {linear} }}$ ) to calculate the linear luminance Y_linear, which can then be gamma-compressed back again if the grayscale result is also to be encoded and stored in a typical nonlinear colorspace.^[5]

For the common sRGB color space, gamma expansion is defined as $${\displaystyle C_{\mathrm {linear} }={\begin{cases}{\frac {C_{\mathrm {srgb} }}{12.92}},&{\text{if }}C_{\mathrm {srgb} }\leq 0.04045\\\left({\frac {C_{\mathrm {srgb} }+0.055}{1.055}}\right)^{2.4},&{\text{otherwise}}\end{cases}}}$$ 

where C_srgb represents any of the three gamma-compressed sRGB primaries (R_srgb, G_srgb, and B_srgb, each in range [0,1]) and C_linear is the corresponding linear-intensity value (R_linear, G_linear, and B_linear, also in range [0,1]). Then, linear luminance is calculated as a weighted sum of the three linear-intensity values. The sRGB color space is defined in terms of the CIE 1931 linear luminance Y_linear, which is given by^[6]

$${\displaystyle Y_{\mathrm {linear} }=0.2126R_{\mathrm {linear} }+0.7152G_{\mathrm {linear} }+0.0722B_{\mathrm {linear} }.}$$ 

These three particular coefficients represent the intensity (luminance) perception of typical trichromat humans to light of the precise Rec. 709 additive primary colors (chromaticities) that are used in the definition of sRGB. Human vision is most sensitive to green, so this has the greatest coefficient value (0.7152), and least sensitive to blue, so this has the smallest coefficient (0.0722). To encode grayscale intensity in linear RGB, each of the three color components can be set to equal the calculated linear luminance ${\displaystyle Y_{\mathrm {linear} }}$  (replacing ${\displaystyle R_{\mathrm {linear} },G_{\mathrm {linear} },B_{\mathrm {linear} }}$  by the values ${\displaystyle Y_{\mathrm {linear} },Y_{\mathrm {linear} },Y_{\mathrm {linear} }}$  to get this linear grayscale), which then typically needs to be gamma compressed to get back to a conventional non-linear representation.^[7] For sRGB, each of its three primaries is then set to the same gamma-compressed Y_srgb given by the inverse of the gamma expansion above as

$${\displaystyle Y_{\mathrm {srgb} }={\begin{cases}12.92\ Y_{\mathrm {linear} },&{\text{if }}Y_{\mathrm {linear} }\leq 0.0031308\\1.055\ Y_{\mathrm {linear} }^{1/2.4}-0.055,&{\text{otherwise}}\end{cases}}}$$ 

Because the three sRGB components are then equal, indicating that it is actually a gray image (not color), it is only necessary to store these values once, and we call this the resulting grayscale image. This is how it will normally be stored in sRGB-compatible image formats that support a single-channel grayscale representation, such as JPEG or PNG. Web browsers and other software that recognizes sRGB images should produce the same rendering for such a grayscale image as it would for a "color" sRGB image having the same values in all three color channels.

For images in color spaces such as Y'UV and its relatives, which are used in standard color TV and video systems such as PAL, SECAM, and NTSC, a nonlinear luma component (Y′) is calculated directly from gamma-compressed primary intensities as a weighted sum, which, although not a perfect representation of the colorimetric luminance, can be calculated more quickly without the gamma expansion and compression used in photometric/colorimetric calculations. In the Y'UV and Y'IQ models used by PAL and NTSC, the rec601 luma (Y′) component is computed as $${\displaystyle Y'=0.299R'+0.587G'+0.114B'}$$  where we use the prime to distinguish these nonlinear values from the sRGB nonlinear values (discussed above) which use a somewhat different gamma compression formula, and from the linear RGB components. The ITU-R BT.709 standard used for HDTV developed by the ATSC uses different color coefficients, computing the luma component as $${\displaystyle Y'=0.2126R'+0.7152G'+0.0722B'.}$$  Although these are numerically the same coefficients used in sRGB above, the effect is different because here they are being applied directly to gamma-compressed values rather than to the linearized values. The ITU-R BT.2100 standard for HDR television uses yet different coefficients, computing the luma component as $${\displaystyle Y'=0.2627R'+0.6780G'+0.0593B'.}$$ 

Normally these colorspaces are transformed back to nonlinear R'G'B' before rendering for viewing. To the extent that enough precision remains, they can then be rendered accurately.

But if the luma component Y' itself is instead used directly as a grayscale representation of the color image, luminance is not preserved: two colors can have the same luma Y′ but different CIE linear luminance Y (and thus different nonlinear Y_srgb as defined above) and therefore appear darker or lighter to a typical human than the original color. Similarly, two colors having the same luminance Y (and thus the same Y_srgb) will in general have different luma by either of the Y′ luma definitions above.^[8]

Color images are often built of several stacked color channels, each of them representing value levels of the given channel. For example, RGB images are composed of three independent channels for red, green and blue primary color components; CMYK images have four channels for cyan, magenta, yellow and black ink plates, etc.

Here is an example of color channel splitting of a full RGB color image. The column at left shows the isolated color channels in natural colors, while at right there are their grayscale equivalences:

 

The reverse is also possible: to build a full-color image from their separate grayscale channels. By mangling channels, using offsets, rotating and other manipulations, artistic effects can be achieved instead of accurately reproducing the original image.

• Channel (digital image)
• Halftone
• Duotone
• False-color
• Sepia tone
• Cyanotype
• Morphological image processing
• Mezzotint
• List of monochrome and RGB color formats – Monochrome palettes section
• List of software palettes – Color gradient palettes and false color palettes sections
• Achromatopsia, total color blindness, in which vision is limited to a grayscale
• Zone System