Haloalkane

From the structural perspective, haloalkanes can be classified according to the connectivity of the carbon atom to which the halogen is attached. In primary (1°) haloalkanes, the carbon that carries the halogen atom is only attached to one other alkyl group. An example is chloroethane (CH
₃CH
₂Cl). In secondary (2°) haloalkanes, the carbon that carries the halogen atom has two C–C bonds. In tertiary (3°) haloalkanes, the carbon that carries the halogen atom has three C–C bonds.

Haloalkanes can also be classified according to the type of halogen on group 17 responding to a specific halogenoalkane. Haloalkanes containing carbon bonded to fluorine, chlorine, bromine, and iodine results in organofluorine, organochlorine, organobromine and organoiodine compounds, respectively. Compounds containing more than one kind of halogen are also possible. Several classes of widely used haloalkanes are classified in this way chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs). These abbreviations are particularly common in discussions of the environmental impact of haloalkanes.

Haloalkanes generally resemble the parent alkanes in being colorless, relatively odorless, and hydrophobic. The melting and boiling points of chloro-, bromo-, and iodoalkanes are higher than the analogous alkanes, scaling with the atomic weight and number of halides. This effect is due to the increased strength of the intermolecular forces—from London dispersion to dipole-dipole interaction because of the increased polarizability. Thus tetraiodomethane (CI
₄) is a solid whereas tetrachloromethane (CCl
₄) is a liquid. Many fluoroalkanes, however, go against this trend and have lower melting and boiling points than their nonfluorinated analogues due to the decreased polarizability of fluorine. For example, methane (CH
₄) has a melting point of −182.5 °C whereas tetrafluoromethane (CF
₄) has a melting point of −183.6 °C.

As they contain fewer C–H bonds, haloalkanes are less flammable than alkanes, and some are used in fire extinguishers. Haloalkanes are better solvents than the corresponding alkanes because of their increased polarity. Haloalkanes containing halogens other than fluorine are more reactive than the parent alkanes—it is this reactivity that is the basis of most controversies. Many are alkylating agents, with primary haloalkanes and those containing heavier halogens being the most active (fluoroalkanes do not act as alkylating agents under normal conditions). The ozone-depleting abilities of the CFCs arises from the photolability of the C–Cl bond.

An estimated 4,100,000,000 kg of chloromethane are produced annually by natural sources.^[2] The oceans are estimated to release 1 to 2 million tons of bromomethane annually.^[3]

The formal naming of haloalkanes should follow IUPAC nomenclature, which put the halogen as a prefix to the alkane. For example, ethane with bromine becomes bromoethane, methane with four chlorine groups becomes tetrachloromethane. However, many of these compounds have already an established trivial name, which is endorsed by the IUPAC nomenclature, for example chloroform (trichloromethane) and methylene chloride (dichloromethane). But nowadays, IUPAC nomenclature is used. To reduce confusion this article follows the systematic naming scheme throughout.

Haloalkanes can be produced from virtually all organic precursors. From the perspective of industry, the most important ones are alkanes and alkenes.

Alkanes react with halogens by free radical halogenation. In this reaction a hydrogen atom is removed from the alkane, then replaced by a halogen atom by reaction with a diatomic halogen molecule. Free radical halogenation typically produces a mixture of compounds mono- or multihalogenated at various positions.

In hydrohalogenation, an alkene reacts with a dry hydrogen halide (HX) electrophile like hydrogen chloride (HCl) or hydrogen bromide (HBr) to form a mono-haloalkane. The double bond of the alkene is replaced by two new bonds, one with the halogen and one with the hydrogen atom of the hydrohalic acid. Markovnikov's rule states that under normal conditions, hydrogen is attached to the unsaturated carbon with the most hydrogen substituents. The rule is violated when neighboring functional groups polarize the multiple bond, or in certain additions of hydrogen bromide (addition in the presence of peroxides and the Wohl-Ziegler reaction) which occur by a free-radical mechanism.

Alkenes also react with halogens (X₂) to form haloalkanes with two neighboring halogen atoms in a halogen addition reaction. Alkynes react similarly, forming the tetrahalo compounds. This is sometimes known as "decolorizing" the halogen, since the reagent X₂ is colored and the product is usually colorless and odorless.

Alcohol can be converted to haloalkanes. Direct reaction with a hydrohalic acid rarely gives a pure product, instead generating ethers. However, some exceptions are known: ionic liquids suppress the formation or promote the cleavage of ethers,^[4] hydrochloric acid converts tertiary alcohols to choloroalkanes, and primary and secondary alcohols convert similarly in the presence of a Lewis acid activator, such as zinc chloride. The latter is exploited in the Lucas test.

In the laboratory, more active deoxygenating and halogenating agents combine with base to effect the conversion. In the "Darzens halogenation", thionyl chloride (SOCl
₂) with pyridine converts less reactive alcohols to chlorides. Both phosphorus pentachloride (PCl
₅) and phosphorus trichloride (PCl
₃) function similarly, and alcohols convert to bromoalkanes under hydrobromic acid or phosphorus tribromide (PBr₃). The heavier halogens do not require preformed reagents: A catalytic amount of PBr
₃ may be used for the transformation using phosphorus and bromine; PBr
₃ is formed in situ.^[5] Iodoalkanes may similarly be prepared using red phosphorus and iodine (equivalent to phosphorus triiodide).

One family of named reactions relies on the deoxygenating effect of triphenylphosphine. In the Appel reaction, the reagent is tetrahalomethane and triphenylphosphine; the co-products are haloform and triphenylphosphine oxide. In the Mitsunobu reaction, the reagents are any nucleophile, triphenylphosphine, and a diazodicarboxylate; the coproducts are triphenyl­phosphine oxide and a hydrazodiamide.

Two methods for the synthesis of haloalkanes from carboxylic acids are Hunsdiecker reaction and Kochi reaction.

Many chloro and bromoalkanes are formed naturally. The principal pathways involve the enzymes chloroperoxidase and bromoperoxidase.

Primary aromatic amines yield diazonium ions in a solution of sodium nitrite. Upon heating this solution with copper(I) chloride, the diazonium group is replaced by -Cl. This is a comparatively easy method to make aryl halides as the gaseous product can be separated easily from aryl halide.

When an iodide is to be made, copper chloride is not needed. Addition of potassium iodide with gentle shaking produces the haloalkane.

Haloalkanes are reactive towards nucleophiles. They are polar molecules: the carbon to which the halogen is attached is slightly electropositive where the halogen is slightly electronegative. This results in an electron deficient (electrophilic) carbon which, inevitably, attracts nucleophiles.

Substitution reactions involve the replacement of the halogen with another molecule—thus leaving saturated hydrocarbons, as well as the halogenated product. Haloalkanes behave as the R⁺ synthon, and readily react with nucleophiles.

Hydrolysis, a reaction in which water breaks a bond, is a good example of the nucleophilic nature of haloalkanes. The polar bond attracts a hydroxide ion, OH⁻ (NaOH_(aq) being a common source of this ion). This OH⁻ is a nucleophile with a clearly negative charge, as it has excess electrons it donates them to the carbon, which results in a covalent bond between the two. Thus C–X is broken by heterolytic fission resulting in a halide ion, X⁻. As can be seen, the OH is now attached to the alkyl group, creating an alcohol. (Hydrolysis of bromoethane, for example, yields ethanol). Reactions with ammonia give primary amines.

Chloro- and bromoalkanes are readily substituted by iodide in the Finkelstein reaction. The iodoalkanes produced easily undergo further reaction. Sodium iodide is used as a catalyst.

Haloalkanes react with ionic nucleophiles (e.g. cyanide, thiocyanate, azide); the halogen is replaced by the respective group. This is of great synthetic utility: chloroalkanes are often inexpensively available. For example, after undergoing substitution reactions, cyanoalkanes may be hydrolyzed to carboxylic acids, or reduced to primary amines using lithium aluminium hydride. Azoalkanes may be reduced to primary amines by Staudinger reduction or lithium aluminium hydride. Amines may also be prepared from alkyl halides in amine alkylation, Gabriel synthesis and Delepine reaction, by undergoing nucleophilic substitution with potassium phthalimide or hexamine respectively, followed by hydrolysis.

In the presence of a base, haloalkanes alkylate alcohols, amines, and thiols to obtain ethers, N-substituted amines, and thioethers respectively. They are substituted by Grignard reagent to give magnesium salts and an extended alkyl compound.

In dehydrohalogenation reactions, the halogen and an adjacent proton are removed from halocarbons, thus forming an alkene. For example, with bromoethane and sodium hydroxide (NaOH) in ethanol, the hydroxide ion HO⁻ abstracts a hydrogen atom. A Bromide ion is then lost, resulting in ethene, H₂O and NaBr. Thus, haloalkanes can be converted to alkenes. Similarly, dihaloalkanes can be converted to alkynes.

In related reactions, 1,2-dibromocompounds are debrominated by zinc dust to give alkenes and geminal dihalides can react with strong bases to give carbenes.

Haloalkanes undergo free-radical reactions with elemental magnesium to give alkyl-magnesium compound: Grignard reagent. Haloalkanes also react with lithium metal to give organolithium compounds. Both Grignard reagents and organolithium compounds behave as the R⁻ synthon. Alkali metals such as sodium and lithium are able to cause haloalkanes to couple in Wurtz reaction, giving symmetrical alkanes. Haloalkanes, especially iodoalkanes, also undergo oxidative addition reactions to give organometallic compounds.

 

Chlorinated or fluorinated alkenes undergo polymerization. Important halogenated polymers include polyvinyl chloride (PVC), and polytetrafluoroethene (PTFE, or teflon).

Alkyl fluorides

An estimated one fifth of pharmaceuticals contain fluorine, including several of the top drugs. Most of these compounds are alkyl fluorides.^[6] Examples include 5-fluorouracil, flunitrazepam (Rohypnol), fluoxetine (Prozac), paroxetine (Paxil), ciprofloxacin (Cipro), mefloquine and fluconazole. Fluorine-substituted ethers are volatile anesthetics, including the commercial products methoxyflurane, enflurane, isoflurane, sevoflurane and desflurane.

Alkyl chlorides

Some low molecular weight chlorinated hydrocarbons such as chloroform, dichloromethane, dichloroethene, and trichloroethane are useful solvents. Several million tons of chlorinated methanes are produced annually. Chloromethane is a precursor to chlorosilanes and silicones. Chlorodifluoromethane (CHClF₂) is used to make teflon.^[7]

Alkyl bromides

Large scale applications of alkyl bromides exploit their toxicity, which also limits their usefulness. Methyl bromide is also an effective fumigant, but its production and use are controversial.

Alkyl iodides

No large scale applications are known for alkyl iodides. Methyl iodide is a popular methylating agent in organic synthesis.

Chlorofluorocarbons

Chlorofluorocarbons were used almost universally as refrigerants and propellants due to their relatively low toxicity and high heat of vaporization. Starting in the 1980s, as their contribution to ozone depletion became known, their use was increasingly restricted, and they have now largely been replaced by HFCs.

Nature produces massive amounts of chloromethane and bromomethane. Most concern focuses on anthropogenic sources, which are potential toxins, even carcinogens. Similarly, great interest has been shown in remediation of man made halocarbons such as those produced on large scale, such as dry cleaning fluids. Volatile halocarbons degrade photochemically because the carbon-halogen bond can be labile. Some microorganisms dehalogenate halocarbons. While this behavior is intriguing, the rates of remediation are generally very slow.^[8]

As alkylating agents, haloalkanes are potential carcinogens. The more reactive members of this large class of compounds generally pose greater risk, e.g. carbon tetrachloride.^[9]

•   Media related to Haloalkanes at Wikimedia Commons