Atmel ARM-based processors

ARM licenses the core design for a series of 32-bit processors. ARM does not manufacture any complete silicon products, just intellectual property (IP). The ARM processors are RISC (reduced instruction set computing). This is similar to Microchip's AVR 8-bit products, a later adoption of RISC architecture. Whereas the AVR architecture used Harvard architecture exclusively, some ARM cores are Harvard (Cortex-M3) and others are Von Neumann architecture (ARM7TDMI).

Semiconductor companies such as Microchip take the ARM cores, which use a consistent set of instructions and register naming, and add peripheral circuits such as ADCs (analog to digital converters), clock management, and serial communications such as USART, SPI, I2C, CAN, LIN, USB, Ethernet, and LCD, Camera or Touch controllers. Microchip made efforts to adapt advanced peripherals and power management that used very little power and can operate independently without having the CPU core powered up (sleepwalking). They also provided for DMA between external interfaces and memories increasing data throughput with minimal processor intervention.

Microchip sells both MCUs (microcontroller units) that have internal Flash memory, and MPUs (microprocessor units) that use external memory. In addition to the chips themselves, Microchip offers demo boards, both on its website, and through distribution channels such as Digi-key, Farnell, Ineltek, Arrow, Avnet, Future Electronics, and Mouser.

Some of the Microchip ARM-based products are meant for specific applications, such as their SAM4CP that is used in smart-grid energy meters.

• 1995 sign ARM ARM7TDMI "Thumb" core license agreement (ARMv4T Von Neumann architecture) (an MPU core Atmel made into MCU)
  • AT91M40800 (1998)
  • AT91M42800A
  • AT91M55800A
  • AT91R40008
  • AT91FR40162 (2002)
  • SAM7S/SE
  • SAM7X/XC
  • SAM7L
• 1995 sign ARM920T/ARM9TDMI (MPU) core license agreement (ARMv4T Von Neumann architecture)
  • AT91RM9200 (2003)
• 2000 sign ARM926EJ/ARM9E (MPU) core license agreement (ARMv5 architecture)
  • AT91SAM9260 (2006)
  • AT91SAM9263 (2007)
  • SAM9XE (2008)
  • SAM9N/CN,
  • SAM9R (2009)
  • SAM9G (2009)
  • SAM9M (2010)
  • SAM9X (2020)^[2]
• 2004 sign ARM1176JZ-S core license agreement (not used in Atmel parts)
• 2008 sign Cortex license agreement with ARM Holdings.^[3]
  • Cortex-M3 (MCU) (ARMv7-M Harvard architecture)
    • SAM3U (2009)^[4]
    • SAM3S (2009)^[5]
    • SAM3N (2010)^[6]
    • SAM3A (2012)^[7]
    • SAM3X (2012)^[7]
  • Cortex-M4 (MCU) (ARMv7E-M Harvard architecture)
    • SAM4S (2011)^[8]
    • SAM4L (2012)^[9]
    • SAM4E (2013) series based on the ARM Cortex-M4F, first Atmel MCU that has a FPU (Floating-Point Unit).^[10]
    • SAM4N (2013)
    • SAM4C (2014) dual-core^[11]
    • SAM G51/53 (2014) based on the ARM Cortex-M4F.^[12]
    • SAM G54/55 (2015) based on the ARM Cortex-M4F.^[13]
  • Cortex-A5 (MPU) (ARMv7-A architecture)
    • SAMA5D3 series, (2013) Atmel announced the SAMA5D3 series based on the ARM Cortex-A5, which is the first Atmel chip with a Cortex-A5 core.^[3]
    • SAMA5D4 (2014)^[14]
    • SAMA5D2 series (2015)^[15]
  • Cortex-A7 (MPU) (ARMv7-A architecture)
    • SAMA7G5 (2022)^[16]
  • Cortex-M0+ (MCU)in the SAM D20 (2013) (ARMv6-M architecture) – In June 2013, Atmel announced the SAMD20 series based on the ARM Cortex-M0+.^[17]
  • Cortex-M7 (MCU) (ARMv7-M architecture)
    • SAMS70 series, (2015) Atmel announced the SAM S70 series based on the ARM Cortex-M7.^[18]
    • SAME70 series, (2015) Atmel announced the SAM S70 series based on the ARM Cortex-M7.^[18]
    • SAMV70 series, (2015) Atmel announced the SAM S70 series based on the ARM Cortex-M7, which is the first Atmel chip automotive grade with a Cortex-M7 core.^[19]

Microcontrollers have internal program memory as well as the conventional internal registers and RAM. Microchip ARM MCUs range from the SAM D10 series with as few as 14 pins, to the 144-pin SAM S70 and SAM E70 products.

The SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-pin) families have pin-compatible IC footprints, except for USB device, though they are not voltage level compatible.^[20]

The Atmel C family was launched in May 2015.^[21] Based on Cortex-M0+, pin and code compatible with the SAM D and SAM L series,^[21] with wide operating voltage ranges (2.7–5.5 V), CAN bus, and up to 12 DMA controller channels.

The SAM D (ATSAMD)^[22] family from Microchip consists of four different sub series (SAM D10, SAM D11, SAM D20, SAM D21). The devices are all based on the ARM Cortex-M0+ processor and offer different pin, memory, and feature combinations. The devices are pin- and code-compatible and share peripherals like the Event System and the SERCOM module for reconfigurable multiplexed serial communication ports.^[23] This microcontroller family is used on various hobbyist development boards, such as Arduino Zero (ATSAMD21G18),^[24][25] Sparkfun SAMD21 Mini Breakout (ATSAMD21G18),^[26] and Seeed Studio XIAO SAMD21 (ATSAMD21G18).^[27]

The SAM D5X/E5X and SAM D51 feature the 32-bit Cortex-M4F.

 

In 2009 Atmel announced the ATSAM3U line of flash-based microcontrollers based on the ARM Cortex-M3 processor, as a higher end evolution of the SAM7 microcontroller products. They have a top clock speed in the range of 100 MHz, and come in a variety of flash sizes. In the summer 2009 these parts were still sampling, and a development board had recently been made available.

In December 2009, the ATSAM3S line was announced. This features several enhancements for lower power operation and bill of materials cost reduction.

Market watchers observe that these Cortex-M3 products are competition for Atmel's own AVR32 UC3A products. Both are microcontrollers with largely identical peripherals and other hardware technology, flash-based, similar clock speeds, and with dense 16/32 bit RISC instruction sets.

• SAM3A
• SAM3N
• SAM3S – reduce power consumption
• SAM3U – high-speed USB
• SAM3X – the Arduino Due board uses the Atmel SAM3X8E microcontroller^[28]

The ATSAM4 is based on the ARM Cortex-M4 core. The SAM4E includes a FPU (Floating-Point Unit). The SAM4C includes a dual-core ARM Cortex-M4 (one core with a FPU).

1 August 2017, the ATSAMD5x and ATSAME5x family was announced. This features several enhancements for lower power operation and more peripherals, Ethernet and CANBUS-FD in SAME5x series. [1] Archived 2019-11-06 at the Wayback Machine

• SAM4C – ARM Cortex-M4/M4F dual-core, which includes FPU
• SAM4E18-16 series – ARM Cortex-M4F core, which includes FPU
• SAM4L – ARM Cortex-M4 core
• SAM4N – ARM Cortex-M4 core, pin-to-pin compatibility with SAM4S, SAM3S, SAM3N, SAM7S devices
• SAM4S – ARM Cortex-M4 core
• SAMG5x – ARM Cortex-M4F core, which includes FPU, ATSAMG55 for 120 MHz CPU speed.
• SAMD5x - Latest ARM Cortex-M4F core, which includes FPU and Integrated Security including Symmetric (AES) and Asymmetric (ECC) Encryption, Public Key Exchange Support(PUKCC), TRNG and SHA based memory Integrity checker.
• SAME5x - Same with D5x plus Ethernet MAC and CAN-FD networking peripherals. Both SAMD5x-E5x series integrate many similar peripherals for ex Timers and Sercoms for UART, I2C, SPI etc. from ATSAMD2x and ATSAMC2x M0+ series thus is easier to upgrade to M4F Core MCUs.

These are based on the ARM Cortex-M7 core.

• SAMS70 – general purpose high performance MCU
• SAME70 – connectivity high performance MCU
• SAMV70, SAMV71 – automotive high performance MCU

There are a wide variety of AT91 flash-based microcontrollers, based on ARM7TDMI cores. These chips have a top clock speed in the range of 60 MHz, and come with a variety of flash sizes and peripheral sets.

• SAM7L – low power operation
• SAM7S – USB and other peripherals. SAM7S 64-pin chips are compatible with SAM4S, SAM4N SAM3S, SAM3N families.
• SAM7SE – USB, external memory support, and other peripherals
• SAM7X – Ethernet, USB, CAN, and other peripherals
• SAM7XC -–cryptographic extensions (notably AES support) to AT91SAM7X chips

The AT91SAM9XE flash-based microcontrollers are based on the ARM926ej-s cores. They have a top clock speed in the range of 200 up to 400 MHz, and come with a variety of flash sizes. They somewhat resemble flash-equipped AT91SAM9260 chips.

Microchip introduced the AT91SAM9 processors (using the ARM926ej-s core, with the ARMv5TEJ architecture) as its first broad market follow on to the highly successful AT91RM9200 processor. These processors improved on that predecessor by using less power, incorporating a newer and more powerful ARM core, and providing a variety of chips with different peripheral sets. While most are clocked at up to about 200 MHz, some can run at twice that speed. Processors include:

• SAM9G25
• SAM9G45
• SAM9X35
• SAM9XE512
• SAM9260

This series is based on the ARM Cortex-A5 core.^[3][29]

SAMA5D2

• SAMA5D2 – 10/100 Ethernet, CAN, LCD, ClassD audio, QSPI, USB HSIC, Raw Bayer Image Sensor Interface, LPDDR3/LPDDR2/LPDDR/DDR2, up to 10 UART

SAMA5D3

• SAMA5D31 – 10/100 Ethernet, LCD
• SAMA5D33 – Gigabit Ethernet, LCD
• SAMA5D34 – Gigabit Ethernet, LCD, dual CAN
• SAMA5D35 – no LCD, dual CAN, one Gigabit Ethernet + one 10/100 Ethernet
• SAMA5D36 – LCD, dual CAN, one Gigabit Ethernet + one 10/100 Ethernet

SAMA5D4

• SAMA5D4 – 528 MHz (840 DMIPS), Neon, 128 KB L2 cache, video decoder, LCD, Ethernet

• SAM 4C/CM

Official

• Arduino Due with 84 MHz Atmel ATSAM3X8E (ARM Cortex-M3 core).
• Arduino Zero with 48 MHz Atmel ATSAMD21G18 (ARM Cortex-M0+ core).
• Arduino MKR1000 with 48 MHz Atmel ATSAMW25 (ARM Cortex-M0+ core).

Shield Compatible

• Shield-compatible Rascal with 400 MHz Atmel AT91SAM9G20 (ARM926EJ-S core).

• Xplained Pro
• Xplained
• SAM W21
• SAMA5

Integrated development environments:

Windows

• Microchip - MPLAB and Microchip Studio for AVR and SAM devices (formerly Atmel Studio 7)
• IAR – Embedded Workbench for ARM
• Crossware – Development Suite for ARM

Linux

• Buildroot^[30]
• Openembedded^[31]
• meta-atmel Yocto compliant layer^[32]

• Atmel-ICE
• JTAG-ICE
• Segger J-Link
• Crossware Jaguar

The amount of documentation for all ARM chips is daunting, especially for newcomers. The documentation for microcontrollers from past decades would easily be inclusive in a single document, but as chips have evolved so has the documentation grown. The total documentation is especially hard to grasp for all ARM chips since it consists of documents from the IC manufacturer (for example, Microchip) and documents from CPU core vendor (ARM Holdings).

A typical top-down documentation tree is: manufacturer website, manufacturer marketing slides, manufacturer datasheet for the exact physical chip, manufacturer detailed reference manual that describes common peripherals and aspects of a physical chip family, ARM core generic user guide, ARM core technical reference manual, ARM architecture reference manual that describes the instruction set(s).

Documentation tree (top to bottom)

1. Microchip Microcontrollers and Microprocessors website
2. Microchip ARM-series marketing slides
3. Microchip ARM-chip datasheet
4. ARM core website
5. ARM core generic user guide
6. ARM core technical reference manual
7. ARM architecture reference manual

Microchip has additional documents, such as: evaluation board user manuals, application notes, getting started guides, software library documents, errata, and more. See External Links section for links to official Microchip and ARM documents.

• ARM architecture, List of ARM microprocessor cores, ARM Cortex-M
• Microcontroller, List of common microcontrollers
• Embedded system, Single-board microcontroller
• Interrupt, Interrupt handler, Comparison of real-time operating systems
• JTAG, SWD

Microcontrollers, Digital Signal Controllers and Microprocessors official documents

• Official website

ARM official documents

Other

• Atmel AT91 ARM Microcontroller Forum
• Atmel AT91 Embedded Linux support