Two dots (diacritic)

As the "diaeresis" diacritic, it is used to mark the separation of two distinct vowels in adjacent syllables when an instance of diaeresis (or hiatus) occurs, so as to distinguish from a digraph or diphthong. For example, in the obsolete spelling "coöperate", the diaeresis reminded the reader that the word has four syllables co-op-er-ate, not three. It is used in several languages of western and southern Europe, though rarely now in English.^[2] One well-known usage is in French - the diaeresis is used in naïve, which is commonly spelled in English without the diaeresis. It is, however, obligatory in French, to show that it is pronounced [na.iv] rather than [nev].

As the "umlaut" diacritic, it indicates a sound shift  – also known as umlaut – in which a back vowel becomes a front vowel. It is a specific feature of German and other Germanic languages, affecting the graphemes ⟨a⟩, ⟨o⟩, ⟨u⟩ and ⟨au⟩, which are modified to ⟨ä⟩, ⟨ö⟩, ⟨ü⟩ and ⟨äu⟩.

It derives from the Sutterlin script, formerly used widely in German handwriting, in which the letter e is formed as two short parallel vertical lines very close together (see under Sütterlin#Characteristics).

The two dot diacritic is also sometimes used for purely stylistic reasons. For example, the Brontë family, whose surname was derived from Gaelic and had been anglicised as "Prunty", or "Brunty": At some point, the father of the sisters, Patrick Brontë (born Brunty), decided on the alternative spelling with a diaeresis diacritic over the terminal ⟨e⟩ to indicate that the name had two syllables.

Similarly the "metal umlaut" is a diacritic that is sometimes used gratuitously or decoratively over letters in the names of hard rock or heavy metal bands – for example, those of Motörhead and Mötley Crüe, and of parody bands, such as Spın̈al Tap.

A double dot is also used as a diacritic in cases where it functions as neither a diaeresis nor an umlaut. In the International Phonetic Alphabet (IPA), a double dot above a letter is used for a centralized vowel, a situation more similar to umlaut than to diaeresis. In other languages it is used for vowel length, nasalization, tone, and various other uses where diaeresis or umlaut was available typographically. The IPA uses a double dot below a letter to indicate breathy (murmured) voice.^[3][b]

• In Albanian, Tagalog, and Kashubian, ⟨ë⟩ represents a schwa [ə].
• In Aymara, a double dot is used on ⟨ä⟩ ⟨ï⟩ ⟨ü⟩ for vowel length.
• In the Basque dialect of Soule, ⟨ü⟩ represents [y]
• In the DMG romanization of Tunisian Arabic, ⟨ä⟩, ⟨ö⟩, ⟨ṏ⟩, ⟨ü⟩, and ⟨ṻ⟩ represent [æ], [œ], [œ̃], [y], and [y:].
• In Ligurian official orthography, ⟨ö⟩ is used to represent the sound [oː].
• In Māori, a diaeresis (e.g. wähine) was often used on computers in the past instead of the macron to indicate long vowels, as the diaeresis was relatively easy to produce on many systems, and the macron difficult or impossible.^[4][5]
• In Seneca, ⟨ë⟩ ⟨ö⟩ are nasal vowels, though ⟨ä⟩ is [ɛ], as in German umlaut.
• In Vurës (Vanuatu), ⟨ë⟩ and ⟨ö⟩ encode respectively [œ] and [ø].
• In the Pahawh Hmong script, a double dot is used as one of several tone marks.
• The double dot was used in the early Cyrillic alphabet, which was used to write Old Church Slavonic. The modern Cyrillic Belarusian and Russian alphabets include the letter ⟨ё⟩ (yo), although replacing it with the letter ⟨е⟩ without the diacritic is allowed in Russian.
• Since the 1870s, ⟨Ї⟩, ⟨ї⟩ (Cyrillic letter yi) has been used in the Ukrainian alphabet for iotated [ji]; plain і is not iotated [i]. In Udmurt, ӥ is used for uniotated [i], with и for iotated [ji].
• The form ⟨ÿ⟩ is common in Dutch handwriting and also occasionally used in printed text – but is a form of the digraph "ij" rather than a modification of the letter ⟨y⟩.
• Komi and Udmurt use ⟨Ӧ⟩ (a Cyrillic O with two dots) for [ə].
• The Swedish, Finnish and Estonian languages use ⟨Ä⟩ and ⟨Ö⟩ to represent [æ] and [ø]
• In the languages of J.R.R. Tolkien's Middle-Earth novels, a diaeresis is used to separate vowels belonging to different syllables (e.g. in Eärendil) and on final e to mark it as not a schwa (e.g. in Manwë, Aulë, Oromë, etc.). (There is no schwa in these languages but Tolkien wanted to make sure that readers wouldn't mistakenly pronounce one when speaking the names aloud.)^{[citation needed]}

Jacaltec (a Mayan language) and Malagasy are among the very few languages with a double dot on the letter "n"; in both, n̈ is the velar nasal [ŋ].

In Udmurt, a double dot is also used with the consonant letters ӝ [dʒ] (from ж [ʒ]), ӟ [dʑ] (from з [z] ~ [ʑ]) and ӵ [tʃ] (from ч [tɕ]).

When distinction is important, Ḧ and ẍ are used for representing [ħ] and [ɣ] in the Kurdish Kurmanji alphabet (which are otherwise represented by "h" and "x"). These sounds are borrowed from Arabic.

Ẅ and ÿ: Ÿ is generally a vowel, but it is used as the (semi-vowel) consonant [ɰ] (a [w] without the use of the lips) in Tlingit. This sound is also found in Coast Tsimshian, where it is written ẅ.

A number of languages in Vanuatu use double dots on consonants, to represent linguolabial (or "apicolabial") phonemes in their orthography. Thus Araki contrasts bilabial p [p] with linguolabial p̈ [t̼]; bilabial m [m] with linguolabial m̈ [n̼]; and bilabial v [β] with linguolabial v̈ [ð̼].

Seneca uses ⟨s̈⟩ for [ʃ].

In Arabic the letter ẗ is used in the ISO 233 transliteration for the tāʾ marbūṭah [ة], used to mark feminine gender in nouns and adjectives.

Syriac uses a two dots above a letter, called Siyame, to indicate that the word should be understood as plural. For instance, ܒܝܬܐ (bayta) means "house", while ܒܝ̈ܬܐ (bayte) means "houses". The sign is used especially when no vowel marks are present, which could differentiate between the two forms. Although the origin of the Siyame is different from that of the diaeresis sign, in modern computer systems both are represented by the same Unicode character. This, however, often leads to wrong rendering of the Syriac text.

The N'Ko script, used to write the Mandé languages of West Africa uses a two-dot diacritic (among others) to represent non-native sounds. The dots are slightly larger than those used for diaeresis or umlaut.

The IPA specifies a "subscript umlaut", for example Hindi [kʊm̤ar] "potter";^[3]: 25 the ALA-LC romanization system provides for its use and is one of the main schemes to romanize Persian (for example, rendering ⟨ض⟩ as ⟨z̤⟩). The notation was used to write some Asian languages in Latin script, for example Red Karen.

The double-dot underneath a vowel is still used in Fuzhou romanization of Eastern Min to indicate a modified vowel sound; placing the modifier diacritic underneath the vowel letter makes it easier to combine it with tonal diacritics above the letter, as in the word Mìng-dĕ̤ng-ngṳ̄ ("Eastern Min language").

The diacritics 〮 and 〯 , known as Bangjeom (방점; 傍點), were used to mark pitch accents in Hangul for Middle Korean. They were written to the left of a syllable in vertical writing and above a syllable in horizontal writing.

Character encoding generally treats the umlaut and the diaeresis as the same diacritic mark. Unicode refers to both as diaereses without making any distinction, although the term itself has a more precise literary meaning. For example, U+00F6 ö LATIN SMALL LETTER O WITH DIAERESIS represents both o-umlaut and o-diaeresis, while similar codes are used to represent all such cases.

Unicode encodes a number of cases of "letter with a two dots diacritic" as precomposed characters and these are displayed below. (Unicode uses the term "Diaeresis" for all two-dot diacritics, irrespective of the actual term used for the language in question.) In addition, many more symbols may be composed using the combining character facility, U+0308 ◌̈ COMBINING DIAERESIS, that may be used with any letter or other diacritic to create a customised symbol but this does not mean that the result has any real-world application and are not shown in the table.

Both the combining character U+0308 and the pre-composed codepoints may be regarded as an umlaut or a diaeresis according to context. Compound diacritics are possible, for example U+01DA ǚ LATIN SMALL LETTER U WITH DIAERESIS AND CARON, used as a tonal marks for Hanyu Pinyin, which uses both a two dots diacritic with a caron diacritic. Conversely, when the letter to be accented is an ⟨i⟩, the diacritic replaces the tittle, thus: ⟨ï⟩.

Sometimes, there's a need to distinguish between the umlaut sign and the diaeresis sign. For instance, either may appear in a German name. ISO/IEC JTC 1/SC 2/WG 2 recommends the following for these cases:^[6]

• To represent the umlaut use the Combining Diaeresis (U+0308)
• To represent the diaeresis use Combining Grapheme Joiner (CGJ, U+034F) + Combining Diaeresis (U+0308)

The same advice can be found in the official Unicode FAQ.^[7]

Since version 3.2.0, Unicode also provides U+0364 ◌ͤ COMBINING LATIN SMALL LETTER E which can produce the older umlaut typography.

Unicode provides a combining double dot below as U+0324 ◌̤ COMBINING DIAERESIS BELOW.

Finally, for use with the N'Ko script, there is U+07F3 ◌߳ NKO COMBINING DOUBLE DOT ABOVE.

ASCII, a seven-bit code with just 95 "printable" characters, has no provision for any kind of dot diacritic. Subsequent standardisation treated ASCII as the US national variant of ISO/IEC 646: the French, German and other national variants reassigned a few code points to specific vowels with diacritics, as precomposed characters. Some of these variants also defined the sequence e,backspace," as producing ë but few terminals supported this.

The subsequent (eight bit) ISO 8859-1 character encoding includes the letters ä, ë, ï, ö, ü, and their respective capital forms, as well as ÿ in lower case only, with Ÿ added in the revised edition ISO 8859-15 and Windows-1252.

Character encoding generally treats the umlaut and the diaeresis as the same diacritic mark. Unicode refers to both as diaereses without making any distinction, although the term itself has a more precise literary meaning. For example, U+00F6 ö LATIN SMALL LETTER O WITH DIAERESIS represents both o-umlaut and o-diaeresis, while similar codes are used to represent all such cases.

 

In countries where the local language(s) routinely include letters with diacritics, local keyboards are typically engraved with those symbols. If letters with double dots are not present on the keyboard, there are a number of ways to input them into a computer system.

iOS provides accented letters through press-and-hold on most European Latin-script keyboards, including English. Some keyboard layouts feature combining-accent keys that can add accents to any appropriate letter. A letter with double dots can be produced by pressing ⌥ Option+U, then the letter. This works on English and other keyboards and is documented further in the supplied manuals.^[8]

For ChromeOS with US-International keyboard setting, the combination is "+(letter).^[9] For ChromeOS with UK extended setting, use AltGr⇧ Shift2, release, then the letter.^{[citation needed]} Alternatively, the Unicode codepoint may be entered directly, using Ctrl+⇧ Shift+u, release, then the four-digit code, then ↵ Enter or Space.^[10]

AZERTY and QZERTY keyboards (as used in much of Europe) include precomposed characters (accented letters) as standard and these are fully supported by Microsoft Windows, typically accessed using the AltGr key.

For users with a US keyboard layout, Windows includes a setting "US International", which supports creation of accented letters by changing the function of some keys into dead keys. If the user enters ", nothing will appear on screen, until the user types another character, after which the characters will be merged if possible, or added independently at once if not. Alternatively, the desired character may be generated using Alt codes.

For users in the United Kingdom and Ireland with QWERTY keyboards, Windows has an "Extended" setting such that an accented letter can be created using AltGr2 then the base letter.

When using Microsoft Word for Windows or Outlook, a letter with double dots can be produced by pressing Ctrl⇧ Shift: and then the letter.

X-based systems, Composea" produces ä, and similarly for many other letters including capital letters.

In addition any Unicode code point can be entered, for instance Ctrl+⇧ Shift+UF6Space produces U+00F6 which is ö.

The German keyboard has dedicated keys for ü ö ä. Scandinavian and Turkish keyboards have dedicated keys for their respective language-specific letters, including ö for Swedish, Finnish, and Icelandic, and both ö and ü for Turkish. French and Belgian AZERTY keyboards have a dead key which adds a circumflex (if without Shift) or a diaeresis/umlaut (if with Shift) to the letter key immediately following (for instance Shift-^ followed by e gives ë).

For non-Latin scripts, Greek and Russian use press-and-hold for double-dot diacritics on only a few characters. The Greek keyboard has dialytica and dialytica–tonos variants for upsilon and iota (ϋ ΰ ϊ ΐ), but not for ε ο α η ω, following modern monotonic usage. Russian keyboards feature separate keys for е and ё.

The early 21st century has seen noticeable growth in stylus- and touch-operated interfaces, making the use of on-screen keyboards operated by pointing devices (mouse, stylus, or finger) more important. These "soft" keyboards may replicate the modifier keys found on hardware keyboards, but they may also employ other means of selecting options from a base key, such as right-click or press-and-hold. Soft keyboards may also have multiple contexts, such as letter, numeric, and symbol.

In HTML, vowels with double dots can be entered with an entity reference of the form &?uml;, where ? can be any of a, e, i, o, u, y or their majuscule counterparts. For instance Ä produces Ä.

TeX (and its derivatives, most notably LaTeX) also allows double dots to be placed over letters. The standard way is to use the control sequence \" followed by the relevant letter, e.g. \"u. It is good practice to set the sequence off with curly braces: {\"u} or \"{u}.

TeX's "German" package can be used: it adds the " control sequence (without the backslash) to produce the Umlaut. However, this can cause conflicts if the main language of the document is not German. Since the integration of Unicode through the development of XeTeX and XeLaTeX, it is also possible to input the Unicode character directly into the document, using one of the recognized methods such as Compose key or direct Unicode input.

TeX's traditional control sequences can still be used and will produce the same output (in very early versions of TeX these sequences would produce double dots that were too far above the letter's body).

All these methods can be used with all available font variations (underlined, strikethrough etc.).

• Dot (diacritic)
• Two dots (disambiguation)