Nothing Special   »   [go: up one dir, main page]

Jump to content

Intellec

From Wikipedia, the free encyclopedia
(Redirected from Intel MDS-800)

Intel Intellec
Intel Intellec 4 Mod 40
Also known asIntellec 4 Mod 40, Intellec 8 Mod 80, Intellec MCS4/MCS8
ManufacturerIntel[1]
TypeMicrocomputer
Release date1973 (1973) (1972)[2]
Introductory price$2395
MediaFloppy disk, paper tape[2]
CPUIntel 4004, Intel 4040, Intel 8008 or Intel 8080
Memory5 K standard, expandable up to 16 K for the Intellec 8
StorageROM, PROM, RAM
InputFront panel switches, optional terminal interface
Dimensions7 in. × 17 in. × 14 in.[2]
Mass14 kilograms (31 lb)[2]

The Intellec computers were a series of early microcomputers Intel produced in the 1970s as a development platform for their processors.[1] The Intellec computers were among the first microcomputers ever sold, predating the Altair 8800 by at least two years.[2]

Introduction

[edit]

The first series of Intellecs included the Intellec 4 for the 4004, the Intellec 4 Mod 40 for the 4040, the Intellec 8 for the 8008, and the Intellec 8 Mod 80 for the 8080.[2]

The Intellec 4 and 8 were introduced at the June 1973 National Computer Conference in the New York Coliseum.[3] The Intellec computers were sold not to the general public, only to developers, and a very limited number were built. The Intellec 8 retailed for $2,395.[2]

Features

[edit]
Two Intellec 8 computers
Intellec 4

The Intellecs have resident monitors stored in ROMs.[3] They also included an assembler, linker, and debugger, as well as the ability to act as an in-circuit emulator.[4] Additionally, a PL/M compiler, cross-assembler and simulator were available, which allowed writing programs in a higher-level language than assembly. FORTRAN compilers were also available.[5] The Intellec 8 supported a Teletype operating at 110 baud, a high speed punched paper tape reader[6] and a CRT terminal at 1200 baud.[7]

The Intellec 8 is able to address up to 16 K of memory and came with 5 K pre-installed. The Intellec 4 came with 1 K of PROM and 4 K of RAM for instruction memory, as well as 320 4-bit words of data memory, expandable to 2560 words. The Intellec 8 ran with a two-phase clock of 800 kHz, resulting in an instruction cycle time of 12.5 us. The Intellec 4 ran at a slower clock rate of 750 kHz, but had a faster instruction cycle time of 10.8 us. Both systems were available in "Bare Bones" editions, which omitted the front panel, power supply, and completed chassis; instead, it is designed to mount into a rack. Both systems also weighed 14 kilograms (31 lb).[5]

Usage

[edit]
Intel MCS8 Intellec microcomputer with the cover removed
Intel MCS8 Intellec microcomputer showing the rear of the chassis

Intel did not market the Intellec as a general-purpose microcomputer, but rather as a development system. As the first microprocessors were intended to run embedded systems such as in calculators, cash registers, scientific instrumentation, computer terminals, printers, plotters, industrial robots, synthesizers, game consoles, and so on, the Intellec was used for programming programmable memory chips used by embedded systems, e.g. the 2048-bit (256-byte) Intel 1602A programmable read-only memory (PROM) or erasable 1702A EPROM chips which were plugged into a ZIF socket on the Intellec-8's front panel.[8][9][10] The chip-programming socket is the green device in the lower right corner of the Intellec's front panel.

Intel also marketed the Intellec microcomputer development system as a system for developing other OEM microcomputers.[11][12]

See also

[edit]

References

[edit]
  1. ^ a b Intellec 8/Mod 80 Microcomputer Development System Reference Manual (PDF). Intel. 1975. Archived from the original (PDF) on 2015-06-26. Retrieved 2015-06-25.
  2. ^ a b c d e f g Crosby, Kip (January–March 1994). "Dawn of the Micro: Intel's Intellecs" (PDF). The Analytical Engine. 1 (3). Computer History Association of California: 10–14. ISSN 1071-6351. Archived (PDF) from the original on 2023-10-17. Retrieved 2023-10-17. pp. 10–11: […] the Intel Intellec 8 […] first appeared sometime in 1972 or 1973, two years or more before the Altair 8800 often credited as the "first microcomputer" by standard histories […] Intel maintains that the 8 Mod 8 was first produced in 1973 and discontinued in 1975. Tony Duell has an 8 Mod 80 CPU board dated 1972, and the 8 Mod 8 and 4 Mod 40 are both listed in the Intel Data Catalog published in February 1976, so the actual period of production may have been somewhat longer. (Pertinent Intel docs must be read carefully because the names MCS4, MCS40, MCS8 and MCS80 were used almost indiscriminately to refer to chipsets, computers or full systems.) […] (52 pages)
  3. ^ a b "Bare-bones and stand-alone microcomputers to bow". Electronics. 1973-05-24. p. 130.
  4. ^ "Intellec 8". Center for Computing History. Retrieved 2020-09-30.
  5. ^ a b "Intellec Brochure" (PDF). Intel. Archived (PDF) from the original on 2020-09-30. Retrieved 2020-09-30.
  6. ^ Intel Microcomputer Peripherals: imm8-90 Intellec 8 High Speed Paper Tape Reader
  7. ^ Intellec 8 Bare Bones 8 and Microcomputer Modules
  8. ^ Freiberger & Swaine (2000). Fire in the Valley: The Making of The Personal Computer (Second Edition), McGraw Hill, ISBN 0-07-135892-7.
  9. ^ imm8-76 PROM Programmer Module
  10. ^ Intel Silicon Gate MOS 1602A/1702A 2048-bit electrically programmable read only memory
  11. ^ "Intellec: A new, easy, and inexpensive way to develop microcomputer systems" (PDF).
  12. ^ "Intellec 8 Bare Bones 8 and Microcomputer Modules".

Further reading

[edit]