Pipeline transport

Pipeline transport is the transportation of goods through a pipe. Most commonly, liquids and gases are sent, but pneumatic tubes that transport solid capsules using compressed air are also used.

As for gases and liquids, any chemically stable substance can be sent through a pipeline. Therefore sewage, slurry, water, or even beer pipelines exist; but arguably the most valuable are those transporting fuels: oil (oleoduct), natural gas (gas grid), and biofuels.

Dmitri Mendeleev first suggested using a pipe for transporting petroleum in 1863.

Contents 1 Types by transported substance 1.1 For oil or natural gas 1.2 For ammonia 1.3 For biofuels (ethanol and biobutanol) 1.4 For coal and ore 1.5 For hydrogen 1.6 For water 1.7 For beverages 1.7.1 For beer 1.8 For other uses 2 Types by transport function 3 Construction 4 Operation 5 Technology 5.1 Components 5.2 Leak detection systems 6 Implementation 7 Regulation 8 Pipelines and geopolitics 9 Dangers 9.1 Accidents 9.2 As targets 10 See also 11 References 12 External links

Types by transported substance

For oil or natural gas

Part of a series on
Transport
Modes
Animal-powered Aviation · Cable Human-powered Pipeline · Rail Road · Ship · Space
Topics
History · Outline
Transport portal
v · d · e

There is some argument as to when the first crude oil pipeline was built. However, some^[who?] say pipeline transport was pioneered by Vladimir Shukhov and the Branobel company in the late 19th century. Others^[who?] say oil pipelines originated when the Oil Transport Association first constructed a 2-inch (51 mm) wrought iron pipeline over a 6-mile (9.7 km) track from an oil field in Pennsylvania to a railroad station in Oil Creek, in the 1860s. Pipelines are generally the most economical way to transport large quantities of oil, refined oil products or natural gas over land. Compared to shipping by railroad, they have lower cost per unit and higher capacity. Although pipelines can be built under the sea, that process is economically and technically demanding, so the majority of oil at sea is transported by tanker ships.

Oil pipelines are made from steel or plastic tubes with inner diameter typically from 4 to 48 inches (100 to 1,200 mm). Most pipelines are buried at a typical depth of about 3 to 6 feet (0.91 to 1.8 m). The oil is kept in motion by pump stations along the pipeline, and usually flows at speed of about 1 to 6 metres per second (3.3 to 20 ft/s). Multi-product pipelines are used to transport two or more different products in sequence in the same pipeline. Usually in multi-product pipelines there is no physical separation between the different products. Some mixing of adjacent products occurs, producing interface. At the receiving facilities this interface is usually absorbed in one of the product based on pre-calculated absorption rates.

Crude oil contains varying amounts of wax, or paraffin, and in colder climates wax buildup may occur within a pipeline. Often these pipelines are inspected and cleaned using pipeline inspection gauges, pigs, also known as scrapers or Go-devils. Smart pigs (also known as intelligent or intelligence pigs) are used to detect anomalies in the pipe such as dents, metal loss caused by corrosion, cracking or other mechanical damage.^[2] These devices are launched from pig-launcher stations and travel through the pipeline to be received at any other station down-stream, either cleaning wax deposits and material that may have accumulated inside the line or inspecting and recording the condition of the line.

For natural gas, pipelines are constructed of carbon steel and varying in size from 2 to 60 inches (51 to 1,500 mm) in diameter, depending on the type of pipeline. The gas is pressurized by compressor stations and is odorless unless mixed with a mercaptan odorant where required by a regulating authority.

For ammonia

Highly-toxic ammonia is technically the most dangerous substance to be transported through long-distance pipelines. However, practically incidents on ammonia-transporting lines are uncommon - unlike on industrial ammonia-processing equipment.

A major example of ammonia pipeline is the Ukrainian Transammiak line connecting the TogliattiAzot facility in Russia to the exporting Black Sea-port of Odessa.

For biofuels (ethanol and biobutanol)

Pipelines have been used for transportation of ethanol in Brazil, and there are several ethanol pipeline projects in Brazil and the United States.^[3] Main problems related to the shipment of ethanol by pipeline are its high oxygen content, which makes it corrosive, and absorption of water and impurities in pipelines, which is not a problem with oil and natural gas.^[3][4] Insufficient volumes and cost-effectiveness are other considerations limiting construction of ethanol pipelines.^[4][5]

For coal and ore

Slurry pipelines are sometimes used to transport coal or ore from mines. The material to be transported is closely mixed with water before being introduced to the pipeline; at the far end, the material must be dried. One example is a 525 km slurry pipeline which is planned to transport iron ore from the Minas-Rio mine (producing 26.5 million tonnes per year) to a port at Açu in Brazil.^[6] An existing example is the 85 km Savage River Slurry pipeline in Tasmania, Australia, possibly the world's first when it was built in 1967. It includes a 366m bridge span at 167m above the Savage River.^[7][8]

For hydrogen

Hydrogen pipeline transport is a transportation of hydrogen through a pipe as part of the hydrogen infrastructure. Hydrogen pipeline transport is used to connect the point of hydrogen production or delivery of hydrogen with the point of demand, with transport costs similar to CNG,^[9] the technology is proven,.^[10] Most hydrogen is produced at the place of demand with every 50 to 100 miles (160 km) an industrial production facility.^[11] The 1938 - Rhine-Ruhr 240 km hydrogen pipeline is still in operation.^[12] As of 2004 there are 900 miles (1,400 km) of low pressure hydrogen pipelines in the USA and 930 miles (1,500 km) in Europe.

For water

Two millennia ago the ancient Romans made use of large aqueducts to transport water from higher elevations by building the aqueducts in graduated segments that allowed gravity to push the water along until it reached its destination. Hundreds of these were built throughout Europe and elsewhere, and along with flour mills were considered the lifeline of the Roman Empire. The ancient Chinese also made use of channels and pipe systems for public works. The famous Han Dynasty court eunuch Zhang Rang (d. 189 AD) once ordered the engineer Bi Lan to construct a series of square-pallet chain pumps outside the capital city of Luoyang.^[13] These chain pumps serviced the imperial palaces and living quarters of the capital city as the water lifted by the chain pumps was brought in by a stoneware pipe system.^[13][14]

Pipelines are useful for transporting water for drinking or irrigation over long distances when it needs to move over hills, or where canals or channels are poor choices due to considerations of evaporation, pollution, or environmental impact.

The 530 km (330 mi) Goldfields Water Supply Scheme in Western Australia using 750 mm (30 inch) pipe and completed in 1903 was the largest water supply scheme of its time.^[15][16]

Examples of significant water pipelines in South Australia are the Morgan-Whyalla (completed 1944) and Mannum-Adelaide ^[17] (completed 1955) pipelines.

There are two Los Angeles, California aqueducts, the First Los Angeles Aqueduct (completed 1913) and the Second Los Angeles Aqueduct (completed 1970) which also include extensive use of pipelines.

For beverages

For beer

Bars in the Veltins-Arena, a major football ground in Gelsenkirchen, Germany, are interconnected by a 5 km long beer pipeline. It is the favourite method for distributing beer in such large stadiums, because the bars have to overcome big differences between demands during various stages of a match; this allows them to be supplied by a central tank.

In Randers city in Denmark, the so-called Thor beer pipeline still exists. Originally copper pipes were running directly from the brewery, and, when in 90s the brewery moved out the city, Thor beer replaced the centre of a star with a giant tank.

For other uses

The town of Hallstatt in Austria claims to contain "the oldest industrial pipeline in the world", dating back to 1595.^[18] It was constructed from 13,000 trunks to transport saline solution for 40 kilometers from Hallstatt to Ebensee.^[19]

Types by transport function

In general, pipelines can be classified in three categories depending on purpose:

Gathering pipelines

Group of smaller interconnected pipelines forming complex networks with the purpose of bringing crude oil or natural gas from several nearby wells to a treatment plant or processing facility. In this group, pipelines are usually short- a couple of hundred metres- and with small diameters. Also sub-sea pipelines for collecting product from deep water production platforms are considered gathering systems.

Transportation pipelines

Mainly long pipes with large diameters, moving products (oil, gas, refined products) between cities, countries and even continents. These transportation networks include several compressor stations in gas lines or pump stations for crude and multiproducts pipelines.

Distribution pipelines

Composed of several interconnected pipelines with small diameters, used to take the products to the final consumer. Feeder lines to distribute gas to homes and businesses downstream. Pipelines at terminals for distributing products to tanks and storage facilities are included in this group.

Construction

When a pipeline is built, the construction project not only covers the civil work to lay the pipeline and build the pump/compressor stations, it also has to cover all the work related to the installation of the field devices that will support remote operation.

The pipeline is routed along what is known as a 'right of way'. Pipelines are generally built using the following stages:

1. Route (right of way) Selection 2. Surveying the route 3. Clearing the route 4. Trenching - Main Route and Crossings (roads, rail, other pipes, etc) 6. Installing the pipe 7. Installing valves, intersections, etc. 8. Covering the pipe and trench

Operation

Field devices are instrumentation, data gathering units and communication systems. The field Instrumentation includes flow, pressure and temperature gauges/transmitters, and other devices to measure the relevant data required. These instruments are installed along the pipeline on some specific locations, such as injection or delivery stations, pump stations (liquid pipelines) or compressor stations (gas pipelines), and block valve stations.

The information measured by these field instruments is then gathered in local Remote Terminal Units (RTU) that transfer the field data to a central location in real time using communication systems, such as satellite channels, microwave links, or cellular phone connections.

Pipelines are controlled and operated remotely, from what is usually known as The Main Control Room. In this center, all the data related to field measurement is consolidated in one central database. The data is received from multiple RTUs along the pipeline. It is common to find RTUs installed at every station along the pipeline.

The SCADA system at the Main Control Room receives all the field data and presents it to the pipeline operator through a set of screens or Human Machine Interface, showing the operational conditions of the pipeline. The operator can monitor the hydraulic conditions of the line, as well as send operational commands (open/close valves, turn on/off compressors or pumps, change setpoints, etc.) through the SCADA system to the field.

To optimize and secure the operation of these assets, some pipeline companies are using what is called Advanced Pipeline Applications, which are software tools installed on top of the SCADA system, that provide extended functionality to perform leak detection, leak location, batch tracking (liquid lines), pig tracking, composition tracking, predictive modeling, look ahead modeling, operator training and more.

Technology

Components

Pipeline networks are composed of several pieces of equipment that operate together to move products from location to location. The main elements of a pipeline system are:

Initial injection station

Known also as supply or inlet station, is the beginning of the system, where the product is injected into the line. Storage facilities, pumps or compressors are usually located at these locations.

Compressor/pump stations

Pumps for liquid pipelines and Compressors for gas pipelines, are located along the line to move the product through the pipeline. The location of these stations is defined by the topography of the terrain, the type of product being transported, or operational conditions of the network.

Partial delivery station

Known also as intermediate stations, these facilities allow the pipeline operator to deliver part of the product being transported.

Block valve station

These are the first line of protection for pipelines. With these valves the operator can isolate any segment of the line for maintenance work or isolate a rupture or leak. Block valve stations are usually located every 20 to 30 miles (48 km), depending on the type of pipeline. Even though it is not a design rule, it is a very usual practice in liquid pipelines. The location of these stations depends exclusively on the nature of the product being transported, the trajectory of the pipeline and/or the operational conditions of the line.

Regulator station

This is a special type of valve station, where the operator can release some of the pressure from the line. Regulators are usually located at the downhill side of a peak.

Final delivery station

Known also as outlet stations or terminals, this is where the product will be distributed to the consumer. It could be a tank terminal for liquid pipelines or a connection to a distribution network for gas pipelines.

Leak detection systems

Since oil and gas pipelines are an important asset of the economic development of almost any country, it has been required either by government regulations or internal policies to ensure the safety of the assets, and the population and environment where these pipelines run.

Pipeline companies face government regulation, environmental constraints and social situations. Pipeline companies should comply with government regulations which may define minimum staff to run the operation, operator training requirements, up to specifics including pipeline facilities, technology and applications required to ensure operational safety. As an example, in the State of Washington, it is mandatory for pipeline operators to be able to detect and locate leaks of 8 percent of maximum flow within 15 minutes or less.

The social situation also affects the operation of pipelines. In third world countries, product theft is a problem for pipeline companies. It is common to find unauthorized extractions in the middle of the pipeline. In this case, the detection levels should be under 2 percent of maximum flow, with a high expectation for location accuracy.

Different types of technologies and strategies have been implemented, from physically walking the lines to satellite surveillance. The most common technology to protect these lines from occasional leaks is known as Computational Pipeline Monitoring Systems or CPM. CPM takes information from the field related to pressures, flows, and temperatures to estimate the hydraulic behavior of the product being transported. Once the estimation is done, the results are compared to other field references to detect the presence of an anomaly or unexpected situation, which may be related to a leak.

The American Petroleum Institute has published several articles related to the performance of CPM in liquids pipelines, the API Publications are:

• API 1130 – Computational pipeline monitoring for liquids pipelines

• API 1155 – Evaluation methodology for software based leak detection systems

• API 1149 – Pipeline variable uncertainties & their effects on leak detectability

Implementation

As a rule pipelines for all uses are laid in most cases underground. However in some cases it is necessary to cross a valley or a river on a pipeline bridge. Pipelines for centralized heating systems are often laid on the ground or overhead. Pipelines for petroleum running through permafrost areas as Trans-Alaska-Pipeline are often run overhead in order to avoid melting the frozen ground by hot petroleum which would result in sinking the pipeline in the ground.

Regulation

In the US, onshore and offshore pipelines used to transport oil and gas are regulated by the Pipeline and Hazardous Materials Safety Administration (PHMSA). Certain offshore pipelines used to produce oil and gas are regulated by the Minerals Management Service (MMS). In Canada, pipelines are regulated by either the provincial regulators or, if they cross provincial boundaries or the Canada/US border, by the National Energy Board (NEB). Government regulations in Canada and the United States require that buried fuel pipelines must be protected from corrosion. Often, the most economical method of corrosion control is by use of pipeline coating in conjunction with cathodic protection and technology to monitor the pipeline. Above ground, cathodic protection is not an option. The coating is the only external protection.

Pipelines and geopolitics

Pipelines for major energy resources (petroleum and natural gas) are not merely an element of trade. They connect to issues of geopolitics and international security as well, and the construction, placement, and control of oil and gas pipelines often figure prominently in state interests and actions. A notable example of pipeline politics occurred at the beginning of the year 2009, wherein a dispute between Russia and Ukraine ostensibly over pricing led to a major political crisis. Russian state-owned gas company Gazprom cut off natural gas supplies to Ukraine after talks between it and the Ukrainian government fell through. In addition to cutting off supplies to Ukraine, Russian gas flowing through Ukraine—which included nearly all supplies to Southeastern Europe and some supplies to Central and Western Europe—was cut off, creating a major crisis in several countries heavily dependent on Russian gas as fuel. Russia was accused of using the dispute as leverage in its attempt to keep other powers, and particularly the European Union, from interfering in its "near abroad".

Oil and gas pipelines also figure prominently in the politics of Central Asia and the Caucasus.

Dangers

Accidents

Pipelines conveying flammable or explosive material, such as natural gas or oil, pose special safety concerns.

For a more complete list see List of pipeline accidents

• 1982 - One of the largest non-nuclear explosions in history occurred along the Trans-Siberian Pipeline in the former Soviet Union. It has been alleged that the explosion was the result of CIA sabotage of the Trans-Siberian Pipeline.
• June 4, 1989 - sparks from two passing trains detonated gas leaking from an LPG pipeline near Ufa, Russia. Up to 645 people were reported killed.
• October 17, 1998 - 1998 Jesse pipeline explosion at Jesse in the Niger Delta in Nigeria, a petroleum pipeline exploded killing about 1,200 villagers, some of whom were scavenging gasoline - the worst of several similar incidents in this country.
• June 10, 1999 - a pipeline rupture in a Bellingham, Washington park led to the release of 277,200 gallons of gasoline. The gasoline was ignited, causing an explosion that killed two children and one adult.
• August 19, 2000 - natural gas pipeline rupture and fire near Carlsbad, New Mexico; this explosion and fire killed 12 members of the same family. The cause was due to severe internal corrosion of the pipeline.
• July 30, 2004 - a major natural gas pipeline exploded in Ghislenghien, Belgium near Ath (thirty kilometres southwest of Brussels), killing at least 24 people and leaving 132 wounded, some critically. (Expatica)
• May 12, 2006 - an oil pipeline ruptured outside Lagos, Nigeria. Up to 200 people may have been killed. See Nigeria oil blast.
• November 1, 2007 - a propane pipeline exploded near Carmichael, Mississippi, about 30 miles (48 km) south of Meridian, Mississippi. Two people were killed instantly and an additional four were injured. Several homes were destroyed and sixty families were displaced. The pipeline is owned by Enterprise Products Partners LP, and runs from Mont Belvieu, Texas, to Apex, North Carolina, according to an Enterprise spokesman.^[20]

As targets

Pipelines can be the target of vandalism, sabotage, or even terrorist attacks. In war, pipelines are often the target of military attacks, as destruction of pipelines can seriously disrupt enemy logistics.

See also

v · d · ePetroleum industry Petroleum · Primary energy Companies Major petroleum companies Supermajors BP · Chevron · ConocoPhillips · ExxonMobil · Royal Dutch Shell · Total National oil companies ADNOC · China National Offshore Oil Corporation · CNPC · Iraq National Oil Company · Kuwait Petroleum Corporation · NIOC · Nigerian National Petroleum Corporation · Oil and Natural Gas Corporation · Orlen · Pertamina · Petrobras · Petronas · PDVSA · Qatar Petroleum · Rosneft · Saudi Aramco · Sonatrach Other integrated BG Group · Eni · Gazprom (Gazprom Neft) · Lukoil · Nippon Oil · Occidental Petroleum · OMV · PetroChina · Reliance Petroleum · Repsol YPF · Sinopec · Statoil · Suncor Energy · Surgutneftegas · TNK-BP Major services companies AMEC · Baker Hughes · CGGVeritas · CH2M HILL · China Oilfield Services · Ensco · GE Oil & Gas · Halliburton · Petrofac · Saipem · Schlumberger · Transocean · Weatherford International · Wood Group Data Natural gas Consumption · Production · Reserves · Imports · Exports · Price Petroleum Consumption · Production · Reserves · Imports · Exports · Price of petroleum · Price of gasoline and diesel Exploration and production Exploration Core sampling · Geophysics · Petroleum engineering (Reservoir simulation · Seismic to simulation) · Petroleum geology · Petrophysics · Integrated asset modelling  · Reflection seismology (Seismic inversion) · Seismic source Drilling Blowouts · Completion (Squeeze job) · Differential sticking · Directional drilling (Measurement · Geosteering) · Drilling engineering · Drilling fluid · Drilling fluid invasion · Drill stem test · Lost circulation · Tracers · Underbalanced drilling · Well logging · Measurement while drilling Production Agreements (Concessions · Production sharing agreements) · Artificial lift (Pumpjack · Submersible pump (ESP) · Gas lift) · Enhanced oil recovery (EOR) (Steam injection · Gas reinjection) · Petroleum product · Pipeline transport · Refining · Water injection · Well intervention · Upstream · Midstream · Downstream · XT History 1967 Oil Embargo · 1973 oil crisis · 1979 energy crisis · 1980s oil glut · 2000s energy crisis · Founders of the petroleum industry · History of petroleum · Nationalization of oil supplies · Seven Sisters · Standard Oil · Oil market timelines Provinces and fields List of natural gas fields · List of oil fields · East Texas · Gulf of Mexico · Niger Delta · North Sea · Persian Gulf · Prudhoe Bay Oil Field · Russia · Venezuela · Western Canadian Sedimentary Basin Research and development Deep Sea Drilling Program · Energy Biosciences Institute · French Institute of Petroleum · Beijing Institute of Petrochemical Technology · IHS · Integrated Ocean Drilling Program · Kola Superdeep Borehole · Project Mohole · TaskForceMajella Other Acronymns · Big Oil · Drill, baby, drill · OPEC · Peak oil (Mitigation · Timing) · Shale gas · Society of Petroleum Engineers · Swing producer · Unconventional oil (Heavy crude oil · Oil sands · Oil shale) Category ·  Commons

References

External links

• Pipeline Politics in Asia: The Intersection of Demand, Energy Markets, and Supply Routes, by Mikkal E. Herberg et al. (National Bureau of Asian Research, 2010)
• The Dolphin Project: The Development of a Gulf Gas Initiative, by Justin Dargin, Oxford Institute for Energy Studies Jan 2008 Working Paper NG #22
• UK - Linewatch - a joint awareness initiative between 14 oil and gas pipeline operators
• "Submarine Gas Pipe Line Taps Undersea Wealth" November 1951 article about first undersea gas pipeline constructed in the US and the problems encountered
• "The Marvels Of Underground Oil Railroads" Popular Science April 1937
• Construction and delivery of compressor stations for a gas pipeline in the Soviet Union by AEG (company video from the 70ies with subtitles)