Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: AM3715 Hi,
We use MCSPI3_CLK and MCSPI3_SIMO of AM3715 for FPGA upload firmware.
(MCSPI3_SOMI and MCSPI3_CSx didn't be applied and data only be transferred from AM3715 to FPGA)
During data transfer, we found MCSPI3_SIMO seem not be output…
Other Parts Discussed in Thread: AM3715
Hi Sir, When I use no matter 'mtd_debug erase /dev/mtd4 0 0x20000' or 'flash_erase /dev/mtd4 0 0x20000' to erase nand flash, it reports "nand_erase_nand: attempt to erase a bad block at page 0x000xxxxxx" for each…
Part Number: AM3703 Other Parts Discussed in Thread: AM3715 Because of the ongoing IC crisis, we are unable to source AM3703CUS100/AM3703CUSD100 for a legacy device. Is the AM3715CUS100/AM3703CUSD100 firmware image compatible? Unfortunately, significant…
Part Number: AM3715 Other Parts Discussed in Thread: TUSB1210
We currently have problems with the USB path in our device series with the AM3715CUSD100 processor. Operating system is WinCE 7.0
USB Stick and filecontent is visible correct in operating system…
Part Number: AM3715 Hello,
Does AM3715CUSD100 support 2x16bit LPDDR (device: MT46H128M16LFDD-48 IT:C–32Meg x 16 x 4Banks) and total 4Gb 32bit LPDDR at single chip-select (sdrc_ncs0) ? Would you please help me to review the schematic below? Thanks…
Part Number: AM3715 Hi TI Sir :
I have 2 problem.
1. When HSUSB2 interface of AM3715 connects to USB Host port, it can be basically recognized after inserting U disk. From U disk can copy file to AM3715 windows mobile system, but from AM3715 windows…
Part Number: AM3715 For redesign an old board,is the AM3715CUSD100 is still recommended to be used? If positive can we get t Longevity Life time of 7-10 years for this device
Part Number: AM3715 Other Parts Discussed in Thread: FLASHTOOL
I am trying to RAM load my bootloader on to some existing HW using pusb.exe on Windows 10. I follow the process I have always used, but I see a dialog on the Windows PC stating a USB device…