Abstract
The indentation load-displacement behavior of six materials tested with a Berkovich indenter has been carefully documented to establish an improved method for determining hardness and elastic modulus from indentation load-displacement data. The materials included fused silica, soda–lime glass, and single crystals of aluminum, tungsten, quartz, and sapphire. It is shown that the load–displacement curves during unloading in these materials are not linear, even in the initial stages, thereby suggesting that the flat punch approximation used so often in the analysis of unloading data is not entirely adequate. An analysis technique is presented that accounts for the curvature in the unloading data and provides a physically justifiable procedure for determining the depth which should be used in conjunction with the indenter shape function to establish the contact area at peak load. The hardnesses and elastic moduli of the six materials are computed using the analysis procedure and compared with values determined by independent means to assess the accuracy of the method. The results show that with good technique, moduli can be measured to within 5%.
Similar content being viewed by others
References
J. B. Pethica, R. Hutchings, and W. C. Oliver, Philos. Mag. A 48, 593 (1983).
W. C. Oliver, R. Hutchings, and J. B. Pethica, in ASTM STP 889, edited by P. J. Blau and B. R. Lawn (American Society for Testing and Materials, Philadelphia, PA, 1986), pp. 90–108.
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
J. B. Pethica, in Ion Implantation into Metals, edited by V. Ashworth, W. Grant, and R. Procter (Pergamon Press, Oxford, 1982), pp. 147–156.
J. L. Loubet, J. M. Georges, O. Marchesini, and G. Meille, J. Tribology 106, 43 (1984).
D. Newey, M. A. Wilkens, and H. M. Pollock, J. Phys. E: Sci. Instrum. 15, 119 (1982).
D. Stone, W. R. LaFontaine, P. Alexopoulos, T-W. Wu, and Che-Yu Li, J. Mater. Res. 3, 141 (1988).
J. J. Oilman, in The Science of Hardness Testing and Its Research Applications, edited by J. H. Westbrook and H. Conrad (American Society for Metals, Metals Park, OH, 1973), pp. 51–74.
W. C. Oliver, MRS Bulletin XI, 15 (1986).
W. C. Oliver, C. J. McHargue, and S. J. Zinkle, Thin Solid Films 153, 185 (1987).
J. Boussinesq, Applications des Potentiels a l’étude de équilibre et du mouvement des solides élastiques (Gauthier-Villars, Paris, 1885).
H. Hertz, J. reine und angewandte Mathematik 92, 156 (1882).
A. E. H. Love, Philos. Trans. A 228, 377 (1929).
A. E. H. Love, Quart. J. Math. 10, 161 (1939).
K. L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
I. N. Sneddon, Int. J. Engng. Sci. 3, 47 (1965).
J. W. Harding and I. N. Sneddon, Proc. Cambridge Philos. Soc. 41, 12 (1945).
D. Tabor, Proc. R. Soc. A 192, 247 (1948).
N. A. Stillwell and D. Tabor, Proc. Phys. Soc. London 78, 169 (1961).
A. P. Ternovskii, V. P. Alekhin, M.Kh. Shorshorov, M. M. Khrushchov, and V. N. Skvortsov, Zavod. Lab. 39, 1242 (1973).
S.I. Bulychev, V.P. Alekhin, M.Kh. Shorshorov, A.P. Ternovskii, and G.D. Shnyrev, Zavod. Lab. 41, 1137 (1975).
S.I. Bulychev, V.P. Alekhin, M.Kh. Shorshorov, and A.P. Ternovskii, Prob. Prochn. 9, 79 (1976).
M. Kh. Shorshorov, S. I. Bulychev, and V. P. Alekhin, Sov. Phys. Dokl. 26, 769 (1982).
S. I. Bulychev and V. P. Alekhin, Zavod. Lab. 53, 76 (1987).
G. M. Pharr, W. C. Oliver, and F. R. Brotzen, J. Mater. Res. 7, 613 (1992).
R. B. King, Int. J. Solids Structures 3, 1657 (1987).
A. K. Bhattacharya and W. D. Nix, Int. J. Solids Structures 24, 881 (1988).
G. M. Pharr, W. C. Oliver, and D. R. Clarke, Scripta Metall. 23, 1949 (1989).
G. M. Pharr, W. C. Oliver, and D. R. Clarke, J. Elec. Mater. 19, 881 (1990).
G. M. Pharr, W. C. Oliver, and D. S. Harding, J. Mater. Res. 6, 1129 (1991).
J. P. Hirth and J. Lothe, Theory of Dislocations, 2nd ed. (John Wiley and Sons, New York, 1982), p. 837.
J. B. Pethica and W. C. Oliver, Physica Scripta T19, 61 (1987).
J. B. Pethica and W. C. Oliver, in Thin Films: Stresses and Mechanical Properties, edited by J. C. Bravman, W. D. Nix, D. M. Barnett, and D. A. Smith (Mater. Res. Soc. Symp. Proc. 130, 13 (1989).
W. C. Oliver and J. B. Pethica, U.S. Patent No. 4848141, July 1989.
G. Simmons and H. Wang, Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, 2nd ed. (The M.I.T. Press, Cambridge, MA, 1971).
G.R. Anstis, P. Chantikul, B.R. Lawn, and D. B. Marshall, J. Am. Ceram. Soc. 64, 533 (1981).
General Electric Fused Quartz Products Technical Data, general catalog number 7705–7725, April 1985.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Oliver, W.C., Pharr, G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.1564
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1992.1564