Nothing Special   »   [go: up one dir, main page]

CSS Containment Module Level 2

Editor’s Draft,

More details about this document
This version:
https://drafts.csswg.org/css-contain-2/
Latest published version:
https://www.w3.org/TR/css-contain-2/
Previous Versions:
Test Suites:
https://test.csswg.org/harness/results/css-contain-1_dev/
https://wpt.fyi/results/css/css-contain/
Feedback:
CSSWG Issues Repository
Inline In Spec
Editors:
Tab Atkins (Google)
Florian Rivoal (On behalf of Bloomberg)
(Google)
Suggest an Edit for this Spec:
GitHub Editor

Abstract

This CSS module describes the contain property, which indicates that the element’s subtree is independent of the rest of the page. This enables heavy optimizations by user agents when used well.

CSS is a language for describing the rendering of structured documents (such as HTML and XML) on screen, on paper, etc.

Status of this document

This is a public copy of the editors’ draft. It is provided for discussion only and may change at any moment. Its publication here does not imply endorsement of its contents by W3C. Don’t cite this document other than as work in progress.

Please send feedback by filing issues in GitHub (preferred), including the spec code “css-contain” in the title, like this: “[css-contain] …summary of comment…”. All issues and comments are archived. Alternately, feedback can be sent to the (archived) public mailing list www-style@w3.org.

This document is governed by the 03 November 2023 W3C Process Document.

1. Introduction

Efficiently rendering a website relies on the user agent being able to detect what parts of the page are being displayed, which parts might affect the currently-displayed section, and what can be ignored.

There are various heuristics that can be used to guess when a given sub-tree is independent of the rest of the page in some manner, but they’re fragile, so innocuous changes to a page may inadvertently make it fail such heuristic tests, causing rendering to fall into a slow code path. There are also many things that would be good to isolate which are difficult or impossible to detect in a heuristic manner.

To alleviate these problems and allow strong, predictable isolation of a subtree from the rest of the page, this specification defines a contain property.

To allow even further optimization of off-screen contents, this spec also defines a content-visibility property, enabling the user agent to skip an element’s layout and painting entirely when not needed.

1.1. Module Interactions

This document defines new features not present in earlier specifications. In addition, it aims to replace and supersede [CSS-CONTAIN-1] once stable.

1.2. Value Definitions

This specification follows the CSS property definition conventions from [CSS2] using the value definition syntax from [CSS-VALUES-3]. Value types not defined in this specification are defined in CSS Values & Units [CSS-VALUES-3]. Combination with other CSS modules may expand the definitions of these value types.

In addition to the property-specific values listed in their definitions, all properties defined in this specification also accept the CSS-wide keywords as their property value. For readability they have not been repeated explicitly.

2. Strong Containment: the contain property

Tests

The following tests are crash tests that relate to general usage of this feature but are not particularly tied to any particular normative statement.


Name: contain
Value: none | strict | content | [ [size | inline-size] || layout || style || paint ]
Initial: none
Applies to: See below
Inherited: no
Percentages: n/a
Computed value: the keyword none or one or more of size, layout, paint
Canonical order: per grammar
Animation type: not animatable
Tests

User agents are expected to support this property on all media, including non-visual ones.

The contain property allows an author to indicate that an element and its contents are, as much as possible, independent of the rest of the document tree. This allows user agents to utilize much stronger optimizations when rendering a page using contain properly, and allows authors to be confident that their page won’t accidentally fall into a slow code path due to an innocuous change.

none
This value indicates that the property has no effect. The element renders as normal, with no containment effects applied.
strict
This value computes to size layout paint style, and thus turns on all forms of containment for the element.
Tests
content
This value computes to layout paint style, and thus turns on all forms of containment except size containment for the element.
Tests

Note: contain: content is reasonably "safe" to apply widely; its effects are fairly minor in practice, and most content won’t run afoul of its restrictions. However, because it doesn’t apply size containment, the element can still respond to the size of its contents, which can cause layout-invalidation to percolate further up the tree than desired. Use contain: strict when possible, to gain as much containment as you can.

size
The value turns on size containment for the element. This ensures that the containment box can be laid out without needing to examine its descendants.
Tests
inline-size
This value turns on inline-size containment for the element. This prevents the inline-size of its principal box from directly depending on its contents.
Tests

Note: There can still be indirect dependencies, see § 3.2 Inline-Size Containment.

layout
This value turns on layout containment for the element. This ensures that the containment box is totally opaque for layout purposes; nothing outside can affect its internal layout, and vice versa.
Tests
style
This value turns on style containment for the element. This ensures that, for properties which can have effects on more than just an element and its descendants, those effects don’t escape the element.
Tests
paint
This value turns on paint containment for the element. This ensures that the descendants of the containment box don’t display outside its bounds, so if an element is off-screen or otherwise not visible, its descendants are also guaranteed to be not visible.
Tests

This property generally applies to all elements (including CSS Pseudo-Elements 4 § 4.1 Generated Content Pseudo-elements: ::before and ::after), although some types of containment have no effect on some elements, as detailed in § 3 Types of Containment. In addition, in the case of [SVG2], the contain property only applies to svg elements that have an associated CSS layout box.

contain is useful when used widely on a page, particularly when a page contains a lot of "widgets" which are all independent.

For example, assume a micropost social network had markup something like this:

<body>
  <aside>...</aside>
  <section>
    <h2>Messages</h2>
    <article>
      Lol, check out this dog: images.example.com/jsK3jkl
    </article>
    <article>
      I had a ham sandwich today. #goodtimes
    </article>
    <article>
      I have political opinions that you need to hear!
    </article></section>
</body>

There are probably a lot of messages displayed on the site, but each is independent and won’t affect anything else on the site. As such, each can be marked with contain: content to communicate this to the user agent, so it can optimize the page and skip a lot of computation for messages that are off-screen. If the size of each message is known ahead of time, contain: strict can be applied to communicate further restrictions.

Additionally, when any containments are active on either the HTML html or body elements, propagation of properties from the body element to the initial containing block, the viewport, or the canvas background, is disabled. Notably, this affects:

Tests

Note: Propagation to the initial containing block, the viewport, or the canvas background, of properties set on the html element itself is unaffected.

Note: Several properties beyond contain can turn on various containments for an element. These do not affect the value of contain; an element can have contain: none but still have layout containment turned on by content-visibility, for example.

3. Types of Containment

There are several varieties of containment that an element can be subject to, restricting the effects that its descendants can have on the rest of the page in various ways. Containment enables much more powerful optimizations by user agents, and helps authors compose their page out of functional units, as it limits how widely a given change can affect a document.

Specification authors introducing new properties or mechanisms need to consider whether and how the various types of containment affect what they are introducing, and include in their specification any effect not described here.

3.1. Size Containment

Giving an element size containment makes its principal box a size containment box and has the following effects:

  1. The intrinsic sizes of the size containment box are determined as if the element had no content, following the same logic as when sizing as if empty.

    Note: This affects explicit invocations of the min-content or max-content keywords, as well as any calculation that depends on these measurement, such as sizing grid tracks into which a size contained item is placed, or if fit-content sizing the containment box’s parent.

    Tests
  2. Laying out a size containment box and its content is conceptually done in two phases:

    Sizing as if empty
    The used width and height of the containment box are determined as if performing a normal layout of the box, except that it is treated as having no content—​not even through pseudo elements such as ::before, ::after, or ::marker.
    Tests

    Replaced elements must be treated as having a natural width and height of 0 and no natural aspect ratio.

    Note: Size containment only suppresses the natural aspect ratio, so properties like aspect-ratio which affect that preferred aspect ratio directly are honored.

    Tests

    All CSS properties of the size containment box are taken into account as they would be when performing layout normally. Other specifications may make specific exemptions.

    Tests

    Note: Even when the element’s sizing properties specify an intrinsic size, this does not necessarily make the element zero-sized: properties set on the element itself continue to be taken into account, which can cause it to be larger.

    Tests
    Laying out in-place
    The containment box's content (including any pseudo-elements) must then be laid out into the now fixed-size containment box normally.
    Tests

    Note: Size containment does not suppress baseline alignment. See layout containment for that.

    Tests
  3. Size containment boxes are monolithic (See CSS Fragmentation 3 § 4.1 Possible Break Points).

    Tests
Given the following markup and style, the image would be sized to 100px by 100px, as the aspect ratio set by the aspect-ratio property takes effect.
img {
  width: 100px;
  aspect-ratio: 1/1;
  contain: size;
}

<img src="https://www.example.com/300x100.jpg">

If the aspect-ratio property had not been declared, the image would have been 100px by 0px, as its natural aspect ratio is suppressed, and its natural height is treated as 0.

However, giving an element size containment has no effect if any of the following are true:

Note: Internal table boxes, which do not include table captions, are excluded, because the table layout algorithm does not allow boxes to become smaller than their inflow content. Sizing a table cell as if it was empty and then laying out its content inside without changing the size is effectively an undefined operation. Manually setting the width or height properties to 0 cannot make it smaller than its content. This concern does not apply to table captions, which are perfectly capable of having a fixed size that is independent of their content.

Tests

3.1.1. Possible Size-Containment Optimizations

This section is non-normative.

By itself, size containment does not offer much optimization opportunity. Its primary benefit on its own is that tools which want to lay out the containment box's contents based on the containment box's size (such as a JS library implementing the "container query" concept) can do so without fear of "infinite loops", where having a child’s size respond to the size of the containment box causes the containment box's size to change as well, possibly triggering further changes in how the child sizes itself and possibly thus more changes to the containment box's size, ad infinitum.

When paired with layout containment, though, possible optimizations that can be enabled include (but are not limited to):

  1. When the style or contents of a descendant of the containment box is changed, calculating what part of the DOM tree is "dirtied" and might need to be re-laid out can stop at the containment box.

  2. When laying out the page, if the containment box is off-screen or obscured, the layout of its contents (i.e. "laying out in-place") can be delayed or done at a lower priority.

3.2. Inline-Size Containment

Giving an element inline-size containment applies size containment to the inline-axis sizing of its principal box. This means the inline-axis intrinsic sizes of the principal box are determined as if the element had no content. However, content continues to impact the box’s block-axis intrinsic sizes as usual, and the box is allowed to fragment normally in the block axis.

Note: In some cases, a box’s block-axis intrinsic sizes can impact layout in the parent formatting context in ways that affect the box’s inline size (e.g. by triggering scrollbars on an ancestor element), creating a dependency of the box’s inline size on its own content. If this changed inline size results in a different block size, that new block size can loop into further impacting the parent formatting context, but not in a way that reverts it to the previously-problematic layout.

For example, if scrollbars were introduced, they are not then removed, even if the consequent block size is small enough to not need them; or if a box’s logical height collides with a lower-placed float and is cleared down to where it also has more available inline space and thus becomes short enough to not have collided, it is not them moved back up to its previous problematic size and position.

Thus, although inline-size containment prevents the box’s content from directly affecting its inline size through its inline-axis intrinsic sizes, its inline size can still indirectly depend on its contents by their effect on its block size.

In general, the relationship between an element’s inline size and it’s block size is unpredictable and non-monotonic, with the block size capable of shifting up and down arbitrarily as the inline size is changed. Infinite cycles are prevented by ensuring that layout does not revert to a previous (known-problematic) state, even if a naive analysis of the constraints would allow for such; in other words, layout always “moves forward”. We believe that current CSS layout specifications incorporate such rules, but to the extent that they don’t, please inform the CSSWG so that these errors can be corrected.

Consider this example, where float placement creates a dependency of block sizes on inline sizes:
<section style="width: 200px; border: solid; display: flow-root;">
  <!-- floated elements that impact the available space -->
  <div style="float: left; width: 50px; height: 80px; background: blue;"></div>
  <div style="float: right; width: 50px; height: 80px; background: blue;"></div>
  <div style="float: left; width: 160px; height: 80px; background: navy;"></div>

  <!-- parent layout, determining context -->
  <article style="border: solid orangered; display: flow-root; min-width: min-content">
    <div style="background: orange; aspect-ratio: 1/1;">
      Article
    </div>
  </article>
</section>
Article

The block layout algorithm will first place the floating boxes, with the first two sitting in the left and right corners of the container, and the third, being too wide to fit between, being pushed below them.

The following article will then be laid out. Because it is display: flow-root, it cannot intersect any floats, and thus must take them into account when figuring out how to size and position itself.

The layout engine first attempts to place the article flush with the top of the container, resulting a 100px width, plenty wide enough to accommodate its min-content size. However, due to the aspect-ratio of its child, this would cause the article to be 100px tall as well, which would intersect the third float 80px below, so this layout opportunity is discarded.

It then attempts to position the article flush with the top of the third float, in the narrow 40px-wide space to its right. However, since the article’s min-width makes it too large to fit in the 40px-wide space beside the third float, it shifts below that one as well, forming a 200px square below all the floated boxes.

Article

If the min-width is removed from the article, or if inline-size containment is added to either the article or header (causing min-width: min-content to resolve to zero), then the article will fit as a 40px square next to the final floated div (possibly with some of its content overflowing).

At this point, the width and height of the article (40px each) would fit back in the first considered space, flush with the top of the container. However, the box is not returned to the previous position, because the layout engine knows already that this position would result in an invalid layout.

Giving an element inline-size containment has no effect if any of the following are true:

3.3. Layout Containment

Giving an element layout containment makes its principal box a layout containment box and has the following effects:

  1. The layout containment box establishes an independent formatting context.

    Tests
  2. If at least one fragmentation container of a fragmentation context has layout containment, or if at least one fragmentation container of a fragmentation context is a descendant of layout containment box and at least one subsequent fragmentation container of the same fragmentation context is not a descendant of that same element with layout containment, then the first layout containment box which is either a fragmentation container itself or is an ancestor of a fragmentation container must “trap” the remainder of the fragmented flow: fragmentation must not continue past the layout containment boundary, and the last fragmentation container within the first layout containment boundary is treated as if it is the last fragmentation container in its fragmentation context.

    If subsequent fragmentation containers in the fragmentation context are only generated when more content remains in the fragmented flow, then they are not generated. If they would exist regardless, they remain part of the fragmentation context, but do not receive any content from the fragmented flow.

    Note: At the time of writing, no stable specification is affected by this point. Only specifications that would enable some (but not all) fragmentation containers of a fragmentation context to be layout-contained (or descendants of a layout contained element) are concerned. This is not the case of [CSS-PAGE-3] nor of [CSS-MULTICOL-1]. This requirement is nonetheless included because several mechanisms that would make this a possibility have been considered (e.g.: [CSS-REGIONS-1], ::nth-fragment(), a hypothetical selector for individual columns of a multicol…), and the guarantees that layout containment is intended to offer would not be realized if such mechanisms did not abide by this rule. [CSS-REGIONS-1] has details over how layout containment affects regions.

    <article>Lorem ipsum…</article>
    <div id=a></div>
    <aside>
      <div id=b></div>
      <div id=c></div>
    </aside>
    <aside>
      <div id=d></div>
      <div id=e></div>
    </aside>
    <div id=f></div>
    
    article {flow-into: foo;}
    #a, #b, #c, #d, #e, #f {flow-from: foo;}
    aside {contain: layout}
    

    In this [CSS-REGIONS-1] example, content can flow from #a to #b, from #b to #c. However as #c is the last fragment container in the first layout containment box it traps all the remaining content, and nothing gets flowed into #d, #e, or #f.

  3. If the computed value of the overflow property is either visible or clip or a combination thereof, any overflow must be treated as ink overflow.

    Tests
  4. The layout containment box establishes an absolute positioning containing block and a fixed positioning containing block.

    Tests
  5. The layout containment box creates a stacking context.

    Tests
  6. Forced breaks are allowed within layout containment boxes but do not propagate to the parent as otherwise described in CSS Fragmentation 3 § 3.1 Breaks Between Boxes: the break-before and break-after properties.

    Tests

    Note: This introduces the previously non-existent possibility that forced breaks may occur between a box and its container (See CSS Fragmentation 3 § 4.1 Possible Break Points).

  7. For the purpose of the vertical-align property, or any other property whose effects need to relate the position of the layout containment box's baseline to something other than its descendants, the containment box is treated as having no baseline.

    Tests

However, giving an element layout containment has no effect if any of the following are true:

3.3.1. Possible Layout-Containment Optimizations

This section is non-normative.

Possible optimizations that can be enabled by layout containment include (but are not limited to):

  1. When laying out the page, the contents of separate containment boxes can be laid out in parallel, as they’re guaranteed not to affect each other.

  2. When laying out the page, if the containment box is off-screen or obscured and the layout of the visible parts of the screen do not depend on the size of the containment box (for example, if the containment box is near the end of a block container, and you’re viewing the beginning of the block container), the layout of the containment box' contents can be delayed or done at a lower priority.

    (When paired with size containment, this optimization can be applied more liberally.)

3.4. Style Containment

Giving an element style containment has the following effects:

  1. The counter-increment and counter-set properties must be scoped to the element’s sub-tree and create a new counter.

    Tests
  2. The effects of the content property’s open-quote, close-quote, no-open-quote and no-close-quote must be scoped to the element’s sub-tree.

    Note: This implies that the depth of quote nesting in the subtree is unchanged and starts at the value that its context normally implies, but that changes to the depth of quote nesting by these values inside the subtree do not affect the depth of quote nesting outside the subtree.

    Tests
Tests

However, giving an element style containment has no effect if any of the following are true:

Note: [CSS-REGIONS-1] has normative requirements on how style containment affects regions.

A scoped property has its effects scoped to a particular element or subtree.

As counter-increment is scoped to an element’s subtree, the first use of it within the subtree creates a fresh counter, regardless of whether the counter had been used outside the scoping element. Any increments made within the subtree have no effect on counters of the same name outside the scoping element. However, the counter() and counters() value of the content property is not itself scoped, and can refer to counters established outside of the subtree.

For example, the following markup and style:

<div>
  <div style="contain: style;">
    <div></div>
    <div></div>
  </div>
  <div>
    <div></div>
    <div></div>
  </div>
</div>
body {
  counter-reset: foo;
}
div {
  counter-increment: foo;

  /* and to help observe nesting properly */
  margin: .2em;
  padding: .2em;
  background: #0001;
}
div::before {
  content: counters(foo, ".");
}

Will render like:

1
2
2.1
2.2
3
4
5

Here, the style-contained element still interacts with the foo counter normally, incrementing it to 2. Its ::before pseudo-element, which is effectively a child and thus within the containment boundary, can still see that counter normally, and thus will render the string "2".

Later siblings of the style-contained element don’t see anything that goes on within the boundary, so they increment the foo counter to 3 and beyond.

Within the containment, however, the descendant divs aren’t allowed to modify the value of the outside counter, so instead they’ll create a fresh (nested) foo counter when they attempt to increment it.

3.4.1. Possible Style-Containment Optimizations

This section is non-normative.

Possible optimizations that can be enabled by style containment include (but are not limited to):

  1. Whenever a property is changed on a descendant of an element with style containment, calculating what part of the DOM tree is "dirtied" and might need to have its style recalculated can stop at the element with style containment.

3.5. Paint Containment

Giving an element paint containment makes its principal box a paint containment box and has the following effects:

  1. The contents of the element including any ink or scrollable overflow must be clipped to the overflow clip edge of the paint containment box, taking [[css-backgrounds-3#corner clipping|corner clipping]] into account. This does not include the creation of any mechanism to access or indicate the presence of the clipped content; nor does it inhibit the creation of any such mechanism through other properties, such as overflow, resize, or text-overflow.

    Tests

    Note: This clipping shape respects overflow-clip-margin, allowing an element with paint containment to still slightly overflow its normal bounds.

    Note: The behavior is described in this paragraph is equivalent to changing overflow-x: visible into overflow-x: clip and overflow-y: visible into overflow-y: clip at used value time, while leaving other values of overflow-x and overflow-y unchanged.

    Tests
  2. The paint containment box establishes an absolute positioning containing block and a fixed positioning containing block.

    Tests
  3. The paint containment box creates a stacking context.

    Tests
  4. The paint containment box establishes an independent formatting context.

    Tests

However, giving an element paint containment has no effect if any of the following are true:

3.5.1. Possible Paint-Containment Optimizations

This section is non-normative.

Possible optimizations that can be enabled by paint containment include (but are not limited to):

  1. If the containment box is off-screen or obscured, the UA can usually skip trying to paint its contents, as they’re guaranteed to be off-screen/obscured as well.

    Note: Some paint effects such as the blur() filter from [FILTER-EFFECTS-1] have non local effects. The user agent needs to keep track of these, as it may need to repaint parts of an element with such a filter when its descendents change, even if they have paint containment and could otherwise be skipped.

  2. Unless the clipped content is made accessible via a separate mechanism such as the overflow, resize, or text-overflow properties, the UA can reserve "canvas" space for the box exactly the box’s size. (In similar, scrollable, situations, like overflow: hidden, it’s possible to scroll to the currently-clipped content, so UAs often predictively overpaint somewhat so there’s something to see as soon as the scroll happens, rather than a frame later.)

  3. Because they are guaranteed to be stacking contexts, scrolling elements can be painted into a single GPU layer.

4. Suppressing An Element’s Contents Entirely: the content-visibility property

Tests

Tests related to content-visibility which haven't been triaged to any particular point in the spec


Name: content-visibility
Value: visible | auto | hidden
Initial: visible
Applies to: elements for which size containment can apply
Inherited: no
Percentages: n/a
Computed value: as specified
Canonical order: per grammar
Animation type: see § 4.1 Animating and Interpolating content-visibility
Tests

The following tests are crash tests that relate to general usage of this feature but are not particularly tied to any particular normative statement.


these should be more accurately dispatched paragraph per paragraph to the relevant points in the specification


The content-visibility property controls whether or not an element renders its contents at all, along with forcing a strong set of containments, allowing user agents to potentially omit large swathes of layout and rendering work until it becomes needed. It has the following values:

visible

No effect. The element’s contents are laid out and rendered as normal.

Tests
hidden

The element skips its contents.

Tests

The skipped contents must not be accessible to user-agent features, such as find-in-page, tab-order navigation, etc., nor be selectable or focusable.

Tests

Note: This is similar to giving the contents display: none.

Tests
auto

Changes the used value of the contain property so as to turn on layout containment, style containment, and paint containment for the element.

Tests

If the element is not relevant to the user, it also skips its contents.

Tests

Unlike hidden, the skipped contents must still be available as normal to user-agent features such as find-in-page, tab order navigation, etc., and must be focusable and selectable as normal.

Tests
When an element skips its contents, the user agent must change the used value of the contain property so as to turn on layout containment, style containment, paint containment, and size containment. Further, its contents (the flat tree descendants of the element, including both text and elements, or the replaced content of a replaced element) are not painted (as if they had visibility: hidden) and do not respond to hit-testing (as if they had pointer-events: none), and to a large extent do not update their styles at all unless explicitly requested by script (see § 4.5 Restrictions and Clarifications for details).
Tests

The user agent should additionally avoid as much layout/rendering work as possible for skipped contents; the combination of heavy containment and making the contents invisible and untouchable enables heavy optimizations. If rendering work is done at some point, the user-agent should retain the previously computed layout state if possible, to allow the skipped contents to be displayed quickly at a later moment.

Tests
If an element has a value other than content-visibility: visible, then the following properties hold:
  • layout containment ensures that the user-agent is able to omit layout work in skipped subtrees, since the results of such layouts will not affect elements outside of the container element.

  • style containment ensures that counters do not have to be processed in skipped subtrees, since they do not affect counters outside of the container element.

  • paint containment ensures that ink overflow of painted contents is clipped; this, in turn, means that user-agent can reliably determine when the visible portion of the element approaches the viewport (and, for content-visibility: auto, start painting it).

  • size containment ensures that the user-agent is able to omit layout in skipped subtrees, since the results of such layouts will not affect the container element’s size.

Note that in the content-visibility: auto case, layout containment, style containment, and paint containment persist even if the element is not skipped. This is done to prevent layout changes that would be incurred by containment changes as a result of an element entering and exiting the skipped state.

An element that has content-visibility: auto is in one of three states when it comes to its proximity to the viewport:

Initially, the element’s proximity to the viewport is not determined. Only connected elements with content-visibility: auto determine their proximity to the viewport. When the element becomes disconnected, the element’s proximity to the viewport becomes not determined.

An element is relevant to the user if any of the following conditions are true:

4.1. Animating and Interpolating content-visibility

In general, the content-visibility property’s animation type is discrete. However, similar to interpolation of visibility (see Web Animations §  Animation of visibility), during interpolation between hidden and any other content-visibility value, p values between 0 and 1 map to the non-hidden value.

4.2. Using content-visibility: hidden

This section is non-normative.

content-visibility: hidden lays powerful restrictions onto an element, and so should be used with caution. It also enables some very useful scenarios, often improving on existing techniques, a few of which are outlined here.

  1. If a page needs to take some measurements of elements or text which aren’t themselves going to be rendered, commonly this is done by positioning the stuff-to-be-measured off-screen, using something like position: absolute; left: -100000px;, then calling an API like getBoundingClientRect().

    Unfortunately, even though the page never intends to display this content, the user agent will still have to do full styling, layout, and rendering for the content, just in case it affects what’s shown on screen. The author also can’t, without further work, guarantee that the content won’t accidentally show up on-screen; even a very negative left value (like above) might not be enough, depending on the content.

    Wrapping this content in a content-visibility: hidden container solves all of these problems. If the wrapper has no border, background, etc, then it and its skipped contents are guaranteed to never render anything to the screen, no matter how big they get. Because the contents are skipped, the user agent can also avoid styling or laying them out until absolutely necessary, when script finally asks for it.

  2. A "single-page app" often consists of several independent panes or "views", of which only one is displayed at a time.

    If the author wants to avoid paying styling/layout/rendering/etc cost for the inactive views, they can remove them from the document entirely, or at minimum apply display:none to them. Unfortunately, this means that when the view does need to be displayed, all of the styling/layout/rendering/etc work needs to be done all at once, potentially causing a noticeable delay before the view actually shows up.

    Alternately, the view can just be positioned off-screen. This means it’ll be immediately ready when it’s time to be used, but it incurs the cost of styling/layout/rendering all the time, which might be significant, especially if there are a number of inactive views. The inactive views also might still show up to accessibility tooling, confusing users of screen-readers, people using Ctrl-F to find-in-page, etc.

    content-visibility: hidden improves on both of these options. Because the contents are skipped, the user agent isn’t spending time on them when they’re not active. They’re also not visible to screen readers, find-in-page, and other tools. And because user agents should preserve previous styling/layout work if possible, if the view was displayed before, re-rendering it might be very fast.

  3. If an author wants to make an element "invisible", but still show up in the page for layout purposes, one option is visibility: hidden. However, descendants of a visibility: hidden element can set visibility: visible and start showing up again, which isn’t always intuitive or expected.

    content-visibility: hidden performs a very similar purpose, but descendants can’t turn it "off" and start displaying; they stay "hidden" until the ancestor turns it off.

    Because content-visibility: hidden also applies many containment values to the container, it’s not always quite as usable as visibility: hidden would be, but when its restrictions are acceptable, it can be a more reliable, more consistent way to hide an element’s contents.

4.3. Using content-visibility: auto

This section is non-normative.

content-visibility: auto is a more complex value than hidden; rather than being similar to display: none, it adaptively hides/displays an element’s contents as they become relevant to the user. It also doesn’t hide its skipped contents from the user agent, so screen readers, find-in-page, and other tools can still interact with it.

It is best to think of it as an upgrade to containment: if an author has a large amount of content to display that will often be off-screen (such as a long scrollable list), and that content is okay with heavy containment, they should consider using content-visibility: auto to apply all of the containments at once. This also strongly hints to the user agent that it’s acceptable to skip work on the contents (possibly causing a small delay when they do come on-screen) because it’s more important to have a large amount of content in the document and most of it won’t be seen anyway.

Note: content-visibility: auto can thus be used instead of complicated "virtual list" techniques, at least in many cases.

Because content-visibility: auto only causes the element to skip its contents when none of it is relevant to the user, it’s best to use at a reasonably fine granularity.

For example, on Twitter, applying content-visibility: auto to the entire timeline wouldn’t accomplish much—​it’s always on-screen, and so it will never skip its contents.

Instead, content-visibility should be applied to individual tweets, allowing each of them to be skipped as they go off-screen.

Because content-visibility: auto imposes size containment when the element skips its contents, if the element depends on its contents to determine its size the layout of the page (or at least, the scrollbar position) can "jump around" as elements go off-screen and start skipping.

This can be fixed in a number of ways:

For example, on Twitter, the average tweet is approximately 200px tall, so contain-intrinsic-size: auto 500px 200px will ensure that the scrollbar thumb is in approximately the correct size and position even when preceding or following tweets are skipped, while still allowing the tweets to size according to their contents when they’re on-screen. As long as the tweets have all been viewed at least once (and haven’t changed size while they were skipped), their sizes will be exactly correct while they’re skipped, so the scrollbar thumb will be as well; only freshly-loaded tweets (such as those loaded at the top of the timeline while you are scrolling further down) will be forced to rely on the 200px height estimate.

4.4. Detecting content-visibility: auto state changes: the contentvisibilityautostatechange event

The contentvisibilityautostatechange event is fired on an element with content-visibility: auto style when the rendering state changes and the element either becomes or stops being relevant to the user.

Tests

This event is dispatched by posting a task at the time when the state change occurs.

[Exposed=Window]
interface ContentVisibilityAutoStateChangeEvent : Event {
  constructor(DOMString type, optional ContentVisibilityAutoStateChangeEventInit eventInitDict = {});
  readonly attribute boolean skipped;
};
dictionary ContentVisibilityAutoStateChangeEventInit : EventInit {
  boolean skipped = false;
};

Description of ContentVisibilityAutoStateChangeEvent attributes:

skipped, of type boolean, readonly

Set to true if target changed state to skip its contents, and false otherwise.

Tests

Description of ContentVisibilityAutoStateChangeEventInit members:

skipped, of type boolean, defaulting to false

See the description of the skipped attribute.

Note that elements in content-visibility: auto subtrees remain semantically relevant even for elements that skip its contents. This means that it is inappropriate to use this signal to indefinitely skip DOM updates in the subtree that is skipped. Instead, it should be used to deprioritize updates, but ensure that the content remains semantically relevant and reasonably up-to-date. This is particularly important for assistive technologies which consume this content even when the ancestor is set to skip its contents.

4.5. Restrictions and Clarifications

  1. From the perspective of an IntersectionObserver, the skipped contents of an element are never intersecting the intersection root. This is true even if both the root and the target elements are in the skipped contents.

    Tests
  2. From the perspective of a ResizeObserver, the skipped contents of an element never change their size. If these elements become non-skipped later, the resize observation will be delivered if the new size differs from the last size used to notify the resize observer.

    Tests
  3. If an element starts or stops skipping its contents, this change happens after the requestAnimationFrame callbacks of the frame that renders the effects of the change have run. Specifically, such changes will take effect between steps 13 and 14 of update the rendering step of the Processing Model (between “run the animation frame callbacks” and “run the update intersection observations steps”).

    Determining the viewport intersection of the element can be done with an internal version of an IntersectionObserver. However, since the observations from this are dispatched at step 14 of update the rendering, any changes to the skipped (and thus painted) state will not be visible to the user until the next frame’s processing. For this reason, updating the skipped state, including containment adjustments, is deferred to that frame as well. This ensures that script accessing, for example, the containment value of the element between these two events (internal intersection observation and skipped state update) will retrieve values consistent with current painted state and not cause any forced layouts.
  4. Elements with content-visibility: auto that have not determined proximity to the viewport must determine their proximity to the viewport in the next update the rendering cycle. The effect of this determination must be reflected in the visual update which results from this update the rendering cycle. See the event loop process model for the concrete algorithm description.

    When an element first gains content-visibility: auto, it may or may not be positioned on screen. The determination of this state and thus determination of whether this element is skipped must happen in the same frame. If it does not, then there is a possibility of producing blank content in the element’s place since visibility check and skipped state update would be deferred to the next frame.
  5. For the purposes of scrolling operations, such as scrollIntoView(), an element with content-visibility: auto that is skipping its contents has its size and location determined with size containment still active.

    Tests

    Note: Once it’s scrolled into view, the element will no longer skip its contents, and so might not have size containment; if this changes the element’s size, it might not align in the viewport exactly as requested.

    If an element is not available to user-agent features (for example, if it is skipped due to a content-visibility: hidden ancestor), then scrolling operations must not scroll to it at all, as if it did not have a layout box.

    Tests
  6. If an element with content-visibility: auto that is skipping its contents is focused (or its contents are), it becomes relevant to the user (and thus stops skipping its contents) before it is scrolled into view due to the focusing.

    Tests

    Note: Thus, unlike the previous point, the element will be correctly sized and aligned in the viewport. This is consistent with the order of the steps for the focus() method.

  7. If an iframe skips its contents or is part of an element’s skipped contents, the user agent should entirely skip the Update The Rendering step in the iframe’s event loop, if possible.

    Tests

    Note: At the moment the iframe starts being skipped, it needs to run that step at least once to remove the painted output.

  8. Skipped contents do not contribute to the result of innerText.

    Tests
  9. While an element is skipped, CSS transitions and animations on the element do not update:

    • New animations are not created even if newly-applied style would start one.

    • Existing animations do not advance in their timeline.

    • Running animations on the element do not end.

    If script queries the style of a skipped element (causing a style change event) such that knowing the state of animations or transitions is required to return correct information, animation and transitions are sampled according to the styles at the time of that style change event:

    Tests

    CSS Animations 2 § 5 Animation Events and CSS Transitions 2 § 5 Transition Events defines what objects are created and what events are fired, with what data, when an animation or transition is updated,.

    When an element stops being skipped, animations and transitions are sampled and then resume advancing on their timelines as normal from that point.

    Note: Overall, this is similar to the behavior of transitions/animations when a background tab is brought back to the foreground, allowing user agents to skip as much unnecessary animation work as possible without overly disrupting the animations when they become relevant again.

  10. While an element is skipped, it must not start any transitions, even if a style change event affects its computed styles.

    When an element stops being skipped, it must not start any transitions as a result of the style change event associated with it no longer being skipped.

    Note: This is similar to an element switching from display:none to a non-none value—​even though the styles are technically changing in that case (from their initial values to their "proper" values from the cascade), no transitions are started.

  11. If an element has an ancestor with content-visibility: hidden, and it is placed in the top layer, it does not generate any boxes, as if it were display: none.

    Tests

    Note: An element skipped for other reasons, such as having a content-visibility: auto ancestor, will still generate boxes as normal, and might thus become un-skipped.

4.6. Accessibility Implications

If a user agent exposes some form of "accessibility tree", akin to the DOM tree but specialized for accessibility use-cases such as screen-readers (thus providing the positions/etc of elements relevant to accessibility APIs, such as focusable elements), then the skipped contents of content-visibility: hidden elements must similarly be "skipped" (omitted) in the accessibility tree (similar to how display: none elements are omitted in all views of the document).

Skipped contents of content-visibility: auto elements must not expose the fact that a user is interacting with the page via the accessibility tree, rather than via rendering visually to the screen. In particular, if a user agent uses content-visibility: auto to avoid doing layout and painting work on off-screen content for displaying to the screen, it must similarly avoid doing that work on off-screen content for representing in the accessibility tree. If this is not possible (for example, if the user agent’s representation of a focusable element in the accessibility tree requires knowledge of its exact position, and thus requires a full layout to be done on it and surrounding contents), then the user agent must omit the skipped contents from the accessibility tree entirely.

Note: This requirement is intended to protect users utilizing accessibility tooling from being identified and profiled as such via observation of timing channels; if a user agent can skip significant amounts of work when rendering visually, but has to do all of the work when rendering to an accessibility tree, then an author can tell how a user is interacting with the page by observing the timing of layout operations.

4.7. Examples

<style>
.sv {
  content-visibility: auto;
  min-height: 50px;
}
</style>

<div class=sv>
  ... some content goes here ...
</div>

The .sv element’s content-visibility: auto value lets the user-agent manage whether the element is skipped. Specifically when this element is near the viewport, the user-agent will begin painting the element. When the element moves away from the viewport, it will stop being painted. In addition, the user-agent should skip as much of the rendering work as possible when the element is skipped.

<style>
.sv {
  content-visibility: hidden;
}
</style>

<div class=sv>
  ... some content goes here ...
</div>

In this case, the element is skipped regardless of viewport intersection. This means that the only way to have the contents painted is via script updating the value to remove content-visibility or change its value. As before, the user-agent should skip as much of the rendering in the contents as possible.

An additional effect of skipping rendering is that the layout state of the contents can be preserved by the user-agent, so that removing the content-visibility property in the future will cause the contents to be rendered quicker than if they were hidden with display: none or similar.

<style>
body {
  margin: 0;
}
.sv {
  content-visibility: hidden;
  position: relative;
  left: 10px;
  top: 20px;
}
#child {
  position: relative;
  left: 1px;
  top: 2px;
  width: 100px;
  height: 200px;
}
</style>

<div id=target class=sv>
  <div id=child></div>
  ... some other content goes here ...
</div>
<script>
  ...
  // This will force rendering work, including layout,
  // if the UA previously avoided it.
  target.firstElementChild.getBoundingClientRect();
  ...
</script>

Similarly to the last example, the element is skipped. The user-agent should avoid as much rendering work as possible. However, in this example, at some point script accesses a layout value in the element’s contents. In this situation, the user-agent cannot avoid rendering work and has to process any previously skipped rendering work in order to return a correct value to the caller. In this example, the result of getBoundingClientRect() is a rect positioned at (11, 22) with a size 100x200.

Note that repeated calls to the same layout value should not cause any additional rendering work, since the user-agent should retain the last updated rendering state.

Also note that this situation in which rendering work is required is not unique. There may be other situations in which the user-agent cannot avoid rendering work.

5. Privacy Considerations

There are no known privacy impacts of the features in this specification.

6. Security Considerations

There are no known security impacts of the features in this specification.

Like any other CSS specification, it affects the rendering of the document, but does not introduce any special ability to present content in a misleading way that was not previously available through other CSS modules and that isn’t inherent to the act of formatting the document.

Appendix A. Changes

This appendix is informative.

Changes from 2022-09-17 Working Draft

Changes from 2020-12-16 Working Draft

Changes from 2020-06-03 Working Draft

Changes from 2019-11-11 Working Draft

Changes from CSS Containment Level 1

Tests

Conformance

Document conventions

Conformance requirements are expressed with a combination of descriptive assertions and RFC 2119 terminology. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this document are to be interpreted as described in RFC 2119. However, for readability, these words do not appear in all uppercase letters in this specification.

All of the text of this specification is normative except sections explicitly marked as non-normative, examples, and notes. [RFC2119]

Examples in this specification are introduced with the words “for example” or are set apart from the normative text with class="example", like this:

This is an example of an informative example.

Informative notes begin with the word “Note” and are set apart from the normative text with class="note", like this:

Note, this is an informative note.

Advisements are normative sections styled to evoke special attention and are set apart from other normative text with <strong class="advisement">, like this: UAs MUST provide an accessible alternative.

Tests

Tests relating to the content of this specification may be documented in “Tests” blocks like this one. Any such block is non-normative.


Conformance classes

Conformance to this specification is defined for three conformance classes:

style sheet
A CSS style sheet.
renderer
A UA that interprets the semantics of a style sheet and renders documents that use them.
authoring tool
A UA that writes a style sheet.

A style sheet is conformant to this specification if all of its statements that use syntax defined in this module are valid according to the generic CSS grammar and the individual grammars of each feature defined in this module.

A renderer is conformant to this specification if, in addition to interpreting the style sheet as defined by the appropriate specifications, it supports all the features defined by this specification by parsing them correctly and rendering the document accordingly. However, the inability of a UA to correctly render a document due to limitations of the device does not make the UA non-conformant. (For example, a UA is not required to render color on a monochrome monitor.)

An authoring tool is conformant to this specification if it writes style sheets that are syntactically correct according to the generic CSS grammar and the individual grammars of each feature in this module, and meet all other conformance requirements of style sheets as described in this module.

Partial implementations

So that authors can exploit the forward-compatible parsing rules to assign fallback values, CSS renderers must treat as invalid (and ignore as appropriate) any at-rules, properties, property values, keywords, and other syntactic constructs for which they have no usable level of support. In particular, user agents must not selectively ignore unsupported component values and honor supported values in a single multi-value property declaration: if any value is considered invalid (as unsupported values must be), CSS requires that the entire declaration be ignored.

Implementations of Unstable and Proprietary Features

To avoid clashes with future stable CSS features, the CSSWG recommends following best practices for the implementation of unstable features and proprietary extensions to CSS.

Non-experimental implementations

Once a specification reaches the Candidate Recommendation stage, non-experimental implementations are possible, and implementors should release an unprefixed implementation of any CR-level feature they can demonstrate to be correctly implemented according to spec.

To establish and maintain the interoperability of CSS across implementations, the CSS Working Group requests that non-experimental CSS renderers submit an implementation report (and, if necessary, the testcases used for that implementation report) to the W3C before releasing an unprefixed implementation of any CSS features. Testcases submitted to W3C are subject to review and correction by the CSS Working Group.

Further information on submitting testcases and implementation reports can be found from on the CSS Working Group’s website at http://www.w3.org/Style/CSS/Test/. Questions should be directed to the public-css-testsuite@w3.org mailing list.

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

[CSS-ANIMATIONS-2]
David Baron; Brian Birtles. CSS Animations Level 2. URL: https://drafts.csswg.org/css-animations-2/
[CSS-BACKGROUNDS-3]
Elika Etemad; Brad Kemper. CSS Backgrounds and Borders Module Level 3. URL: https://drafts.csswg.org/css-backgrounds/
[CSS-BOX-4]
Elika Etemad. CSS Box Model Module Level 4. URL: https://drafts.csswg.org/css-box-4/
[CSS-BREAK-3]
Rossen Atanassov; Elika Etemad. CSS Fragmentation Module Level 3. URL: https://drafts.csswg.org/css-break/
[CSS-CASCADE-5]
Elika Etemad; Miriam Suzanne; Tab Atkins Jr.. CSS Cascading and Inheritance Level 5. URL: https://drafts.csswg.org/css-cascade-5/
[CSS-CONTAIN-1]
Tab Atkins Jr.; Florian Rivoal. CSS Containment Module Level 1. URL: https://drafts.csswg.org/css-contain-1/
[CSS-CONTENT-3]
Elika Etemad; Dave Cramer. CSS Generated Content Module Level 3. URL: https://drafts.csswg.org/css-content-3/
[CSS-DISPLAY-3]
Elika Etemad; Tab Atkins Jr.. CSS Display Module Level 3. URL: https://drafts.csswg.org/css-display/
[CSS-DISPLAY-4]
CSS Display Module Level 4. Editor's Draft. URL: https://drafts.csswg.org/css-display-4/
[CSS-IMAGES-3]
Tab Atkins Jr.; Elika Etemad; Lea Verou. CSS Images Module Level 3. URL: https://drafts.csswg.org/css-images-3/
[CSS-INLINE-3]
Elika Etemad. CSS Inline Layout Module Level 3. URL: https://drafts.csswg.org/css-inline-3/
[CSS-LISTS-3]
Elika Etemad; Tab Atkins Jr.. CSS Lists and Counters Module Level 3. URL: https://drafts.csswg.org/css-lists-3/
[CSS-OVERFLOW-3]
Elika Etemad; Florian Rivoal. CSS Overflow Module Level 3. URL: https://drafts.csswg.org/css-overflow-3/
[CSS-OVERFLOW-4]
David Baron; Florian Rivoal; Elika Etemad. CSS Overflow Module Level 4. URL: https://drafts.csswg.org/css-overflow-4/
[CSS-POSITION-3]
Elika Etemad; Tab Atkins Jr.. CSS Positioned Layout Module Level 3. URL: https://drafts.csswg.org/css-position-3/
[CSS-POSITION-4]
CSS Positioned Layout Module Level 4. Editor's Draft. URL: https://drafts.csswg.org/css-position-4/
[CSS-PSEUDO-4]
Daniel Glazman; Elika Etemad; Alan Stearns. CSS Pseudo-Elements Module Level 4. URL: https://drafts.csswg.org/css-pseudo-4/
[CSS-SCOPING-1]
Tab Atkins Jr.; Elika Etemad. CSS Scoping Module Level 1. URL: https://drafts.csswg.org/css-scoping/
[CSS-SIZING-3]
Tab Atkins Jr.; Elika Etemad. CSS Box Sizing Module Level 3. URL: https://drafts.csswg.org/css-sizing-3/
[CSS-TRANSITIONS-1]
David Baron; et al. CSS Transitions. URL: https://drafts.csswg.org/css-transitions/
[CSS-TRANSITIONS-2]
David Baron; Brian Birtles. CSS Transitions Level 2. URL: https://drafts.csswg.org/css-transitions-2/
[CSS-UI-3]
Tantek Çelik; Florian Rivoal. CSS Basic User Interface Module Level 3 (CSS3 UI). URL: https://drafts.csswg.org/css-ui-3/
[CSS-UI-4]
Florian Rivoal. CSS Basic User Interface Module Level 4. URL: https://drafts.csswg.org/css-ui-4/
[CSS-VALUES-3]
Tab Atkins Jr.; Elika Etemad. CSS Values and Units Module Level 3. URL: https://drafts.csswg.org/css-values-3/
[CSS-VALUES-4]
Tab Atkins Jr.; Elika Etemad. CSS Values and Units Module Level 4. URL: https://drafts.csswg.org/css-values-4/
[CSS-VIEW-TRANSITIONS-1]
Tab Atkins Jr.; Jake Archibald; Khushal Sagar. CSS View Transitions Module Level 1. URL: https://drafts.csswg.org/css-view-transitions-1/
[CSS-WRITING-MODES-3]
Elika Etemad; Koji Ishii. CSS Writing Modes Level 3. URL: https://drafts.csswg.org/css-writing-modes-3/
[CSS-WRITING-MODES-4]
Elika Etemad; Koji Ishii. CSS Writing Modes Level 4. URL: https://drafts.csswg.org/css-writing-modes-4/
[CSS2]
Bert Bos; et al. Cascading Style Sheets Level 2 Revision 1 (CSS 2.1) Specification. URL: https://drafts.csswg.org/css2/
[CSSOM-VIEW-1]
Simon Pieters. CSSOM View Module. URL: https://drafts.csswg.org/cssom-view/
[DOM]
Anne van Kesteren. DOM Standard. Living Standard. URL: https://dom.spec.whatwg.org/
[HTML]
Anne van Kesteren; et al. HTML Standard. Living Standard. URL: https://html.spec.whatwg.org/multipage/
[INTERSECTION-OBSERVER]
Stefan Zager; Emilio Cobos Álvarez; Traian Captan. Intersection Observer. URL: https://w3c.github.io/IntersectionObserver/
[RESIZE-OBSERVER-1]
Aleks Totic; Greg Whitworth. Resize Observer. URL: https://drafts.csswg.org/resize-observer/
[RFC2119]
S. Bradner. Key words for use in RFCs to Indicate Requirement Levels. March 1997. Best Current Practice. URL: https://datatracker.ietf.org/doc/html/rfc2119
[SVG2]
Amelia Bellamy-Royds; et al. Scalable Vector Graphics (SVG) 2. URL: https://svgwg.org/svg2-draft/
[WEB-ANIMATIONS-1]
Brian Birtles; et al. Web Animations. URL: https://drafts.csswg.org/web-animations-1/
[WEBIDL]
Edgar Chen; Timothy Gu. Web IDL Standard. Living Standard. URL: https://webidl.spec.whatwg.org/

Informative References

[CSS-GRID-2]
Tab Atkins Jr.; Elika Etemad; Rossen Atanassov. CSS Grid Layout Module Level 2. URL: https://drafts.csswg.org/css-grid-2/
[CSS-MULTICOL-1]
Florian Rivoal; Rachel Andrew. CSS Multi-column Layout Module Level 1. URL: https://drafts.csswg.org/css-multicol/
[CSS-OVERFLOW-5]
CSS Overflow Module Level 5. Editor's Draft. URL: https://drafts.csswg.org/css-overflow-5/
[CSS-PAGE-3]
Elika Etemad. CSS Paged Media Module Level 3. URL: https://drafts.csswg.org/css-page-3/
[CSS-REGIONS-1]
Rossen Atanassov; Alan Stearns. CSS Regions Module Level 1. URL: https://drafts.csswg.org/css-regions/
[CSS-SIZING-4]
Tab Atkins Jr.; Elika Etemad; Jen Simmons. CSS Box Sizing Module Level 4. URL: https://drafts.csswg.org/css-sizing-4/
[FILTER-EFFECTS-1]
Dirk Schulze; Dean Jackson. Filter Effects Module Level 1. URL: https://drafts.fxtf.org/filter-effects-1/

Property Index

Name Value Initial Applies to Inh. %ages Anim­ation type Canonical order Com­puted value
contain none | strict | content | [ [size | inline-size] || layout || style || paint ] none See below no n/a not animatable per grammar the keyword none or one or more of size, layout, paint
content-visibility visible | auto | hidden visible elements for which size containment can apply no n/a see per grammar as specified

IDL Index

[Exposed=Window]
interface ContentVisibilityAutoStateChangeEvent : Event {
  constructor(DOMString type, optional ContentVisibilityAutoStateChangeEventInit eventInitDict = {});
  readonly attribute boolean skipped;
};
dictionary ContentVisibilityAutoStateChangeEventInit : EventInit {
  boolean skipped = false;
};

Issues Index

In general, the relationship between an element’s inline size and it’s block size is unpredictable and non-monotonic, with the block size capable of shifting up and down arbitrarily as the inline size is changed. Infinite cycles are prevented by ensuring that layout does not revert to a previous (known-problematic) state, even if a naive analysis of the constraints would allow for such; in other words, layout always “moves forward”. We believe that current CSS layout specifications incorporate such rules, but to the extent that they don’t, please inform the CSSWG so that these errors can be corrected.
MDN

ContentVisibilityAutoStateChangeEvent/ContentVisibilityAutoStateChangeEvent

Firefox🔰 110+SafariNoneChrome108+
Opera?Edge108+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?
MDN

ContentVisibilityAutoStateChangeEvent/skipped

Firefox🔰 110+SafariNoneChrome108+
Opera?Edge108+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?
MDN

ContentVisibilityAutoStateChangeEvent

Firefox🔰 110+SafariNoneChrome108+
Opera?Edge108+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?

Element/contentvisibilityautostatechanged_event

Firefox🔰 110+SafariNoneChrome108+
Opera?Edge108+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?
MDN

contain#style

In all current engines.

Firefox103+Safari15.4+Chrome52+
Opera?Edge79+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?
MDN

contain

In all current engines.

Firefox69+Safari15.4+Chrome52+
Opera?Edge79+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?
MDN

content-visibility

Firefoxpreview+SafariNoneChrome85+
Opera?Edge85+
Edge (Legacy)?IENone
Firefox for Android?iOS Safari?Chrome for Android?Android WebView?Samsung Internet?Opera Mobile?