Wire diameter control system based on improved SOA prediction algorithm
Pages 616 - 620
Abstract
Aiming at the problem that the control effect of traditional PID controller is not ideal in the wire diameter control system with nonlinearity, large delay and time variability, an improved Seeker Optimization Algorithm is introduced. Combined with Dynamic Matrix predictive Control, an ISOA-DMC-PID control strategy is proposed. The PID parameters are optimized by ISOA algorithm, and the DMC algorithm improves the lag of the system. The simulation results show that the ISOA-DMC-PID control has the advantages of small overshoot, short adjustment time and strong anti-interference ability. It meets the production requirements of wire diameter and has certain practicability.
References
[1]
Like Han. Research and design of cable diameter control system based on improved PSO FNN[D]. Jiangxi University of Science and Technology.2019.
[2]
Keliang Zhou,Zhenyu Guo. Predictive control of wire diameter of extruder based on Fuzzy Adaptive PID[J]. computer simulation. 2019,36(03):302-306.
[3]
Li H, Yu Q. The wire beltline diameter ACO-KF-PID control research[C]//Prognostics and System Health Management Conference. IEEE, 2017:1-6.
[4]
Zou H, Wang L. An improved constrained dynamic matrix control for temperature in an industrial coke furnace[J]. Measurement and Control. 2019;52(5-6):409-417
[5]
Thomas, C., Yi, S., Meadows, S. et al. Adaptive Smith Predictor for Teleoperation of UAVs with Time-varying Internet Delay[J]. Int. J. Control Autom. Syst. 2020(18) :1465–1473.
[6]
Qiangqiang Yu. Research on wire diameter control system of wire and cable production line[D]. Changchun University of Technology.2017.
[7]
Xinbin Li,Qingjun Zhu. Application of an improved particle swarm optimization algorithm in Multi-Objective Reactive Power Optimization[J]. Journal of Chemical Technology. 2010,25(07):137-143.
[8]
Shengfeng Chen,Xiaohua Chen,Lu Yang. Application of wavelet neural network based on Improved Particle Swarm Optimization Algorithm in transformer fault diagnosis[J]. Power system protection and control. 2014,42(19):37-42.
[9]
PeiChen Zhou,Hongli Zhang. Optimal design of two degree of freedom PID controller based on SOA-MC algorithm[J]. computer simulation. 2018,35(04):337-341.
[10]
Guangyuan Zhao,Chao Wang. Parameter optimization of PID controller based on improved Seeker Optimization Algorithm[J]. computer simulation. 2020, 37(08):302-305+310.
Index Terms
- Wire diameter control system based on improved SOA prediction algorithm
Recommendations
Fuzzy Immune PI Control of Networked Control System Based on ADW Time-Delay Prediction
FSKD '08: Proceedings of the 2008 Fifth International Conference on Fuzzy Systems and Knowledge Discovery - Volume 03The time-delay induced by network in control system is an important factor that affects system stability and dynamic performance. An arithmetic composed of Smith prediction compensator and fuzzy immune PI controller is designed to compensate the time-...
Research of Automotive Steer-by-Wire Control Based on Integral Partition PID Control
WGEC '09: Proceedings of the 2009 Third International Conference on Genetic and Evolutionary ComputingThe steer-by-wire system, with which the conventional mechanical linkage between the steering wheel and the front wheel is removed, is suited to active steering control, to improve vehicle stability, dynamics and maneuverability, as well as to ...
An Improved Generalized Predictive Control Algorithm Based on PID
ICICTA '08: Proceedings of the 2008 International Conference on Intelligent Computation Technology and Automation - Volume 01Based on the analysis of PID algorithm and Generalized Predictive Control algorithm (GPC), the performance index of Generalized Predictive Control algorithm was restructured as PID form. The derivation of PID-type Generalized Predictive Control ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
September 2022
1094 pages
ISBN:9781450397414
DOI:10.1145/3558819
Copyright © 2022 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 26 October 2022
Check for updates
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ICCSIE2022
ICCSIE2022: 7th International Conference on Cyber Security and Information Engineering
September 23 - 25, 2022
QLD, Brisbane, Australia
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 10Total Downloads
- Downloads (Last 12 months)3
- Downloads (Last 6 weeks)0
Reflects downloads up to 24 Sep 2024
Other Metrics
Citations
View Options
Get Access
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format