Article

PrintPut: Resistive and Capacitive Input Widgets for Interactive 3D Prints

Authors:

Jesse Burstyn,

Nicholas Fellion,

Paul Strohmeier,

Roel VertegaalAuthors Info & Claims

Human-Computer Interaction – INTERACT 2015

Pages 332 - 339

https://doi.org/10.1007/978-3-319-22701-6_25

Published: 10 March 2022 Publication History

Abstract

We introduce PrintPut, a method for 3D printing that embeds interactivity directly into printed objects. PrintPut uses conductive filament to offer an assortment of sensors that an industrial designer can easily incorporate into their 3D designs, including buttons, pressure sensors, sliders, touchpads, and flex sensors. PrintPut combines physical and interactive sketching into the same process: seamlessly integrating sensors onto the surfaces of 3D objects, without the need for external sensor hardware.

References

[1]

Gong, N.-W., Steimle, J., Olberding, S., et al.: PrintSense: a versatile sensing technique to support multimodal flexible surface interaction. In: SIGCHI Conference on Human Factors in Computing Systems, pp. 1407–1410. ACM Press, New York (2014)

Google Scholar

[2]

Holman, D., Fellion, N., Vertegaal, R.: Sensing touch using resistive graphs. In: 2014 Conference on Designing Interactive Systems, pp. 195–198. ACM Press, New York (2014)

Google Scholar

[3]

Ishiguro, Y., Poupyrev, I.: 3D printed interactive speakers. In: SIGCHI Conference on Human Factors in Computing Systems, pp. 1733–1742. ACM Press, New York (2014)

Google Scholar

[4]

Kawahara, Y., Hodges, S., Cook, B.: Instant inkjet circuits: lab-based inkjet printing to support rapid prototyping of UbiComp devices. In: 2013 International Joint Conference on Pervasive and Ubiquitous Computing, pp. 363–372. ACM Press, New York (2013)

Google Scholar

[5]

Leigh, S.J., Bradley, R.J., Purssell, C.P., Billson, D.R., Hutchins, D.A.: A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS ONE 7(11), 1–6 (2012)

Google Scholar

[6]

Maker Geeks: conductive ABS filament. www.makergeeks.com/co3dfi.html

Google Scholar

[7]

Mueller, S., Im, S., Gurevich, S., Teibrich, A., Pfisterer, L., Guimbretière, F., Baudisch, P.: WirePrint: 3D printed previews for fast prototyping. In: 27th Annual ACM Symposium on User Interface Software and Technology, pp. 273–280. ACM Press, New York (2014)

Google Scholar

[8]

Olberding, S., Gong, N.-W., Tiab, J., Paradiso, J.A., Steimle, J.: A cuttable multi-touch sensor. In: 26th Annual ACM symposium on User Interface Software and Technology, pp. 245–254. ACM Press, New York (2013)

Google Scholar

[9]

Rendl, C., Greindl, P., Haller, M., Zirkl, M., Stadlober, B., Hartmann, P.: PyzoFlex: printed piezoelectric pressure sensing foil. In: 25th Annual ACM Symposium on User Interface Software and Technology, pp. 509–518. ACM Press, New York (2012)

Google Scholar

[10]

Savage, V., Chang, C., Hartmann, B.: Sauron: embedded single-camera sensing of printed physical user interfaces. In: 26th Annual ACM Symposium on User Interface Software and Technology, pp. 447–456. ACM Press, New York (2013)

Google Scholar

Cited By

View all

Palma GPourjafarian NSteimle JCignoni P(2024)Capacitive Touch Sensing on General 3D SurfacesACM Transactions on Graphics10.1145/365818543:4(1-20)Online publication date: 19-Jul-2024
https://dl.acm.org/doi/10.1145/3658185
Duente TSchrapel MSchulte JJanßen NAl-Azzawi IDemir KRohs M(2024)A Touch of Gold - Spraying and Electroplating 3D Prints to Create Biocompatible On-Skin WearablesAdjunct Proceedings of the 26th International Conference on Mobile Human-Computer Interaction10.1145/3640471.3680227(1-7)Online publication date: 21-Sep-2024
https://dl.acm.org/doi/10.1145/3640471.3680227
Lin YJo J(2024)LeatherBoard: Sustainable On-body Rapid Prototyping with Leather Scraps and Machine EmbroideryExtended Abstracts of the CHI Conference on Human Factors in Computing Systems10.1145/3613905.3650894(1-7)Online publication date: 11-May-2024
https://dl.acm.org/doi/10.1145/3613905.3650894
Show More Cited By

Index Terms

PrintPut: Resistive and Capacitive Input Widgets for Interactive 3D Prints
1. Human-centered computing
  1. Human computer interaction (HCI)
    1. Interaction devices
      1. Touch screens

Index terms have been assigned to the content through auto-classification.

Recommendations

Capricate: A Fabrication Pipeline to Design and 3D Print Capacitive Touch Sensors for Interactive Objects
UIST '15: Proceedings of the 28th Annual ACM Symposium on User Interface Software & Technology

3D printing is widely used to physically prototype the look and feel of 3D objects. Interaction possibilities of these prototypes, however, are often limited to mechanical parts or post-assembled electronics. In this paper, we present Capricate, a ...
Designing Vibrotactile Widgets with Printed Actuators and Sensors
UIST '17 Adjunct: Adjunct Proceedings of the 30th Annual ACM Symposium on User Interface Software and Technology

Physical controls are fabricated through complicated assembly of parts requiring expensive machinery and are prone to mechanical wear. One solution is to embed controls directly in interactive surfaces, but the proprioceptive part of gestural ...
A Touch of Gold - Spraying and Electroplating 3D Prints to Create Biocompatible On-Skin Wearables
MobileHCI '24 Adjunct: Adjunct Proceedings of the 26th International Conference on Mobile Human-Computer Interaction

Iterative design cycles for tangible user interfaces and wearable devices require efficient prototyping techniques to optimize development and to elevate the overall design efficacy. A key challenge for rapid prototyping techniques such as cardboard ...

Comments

Please enable JavaScript to view thecomments powered by Disqus.

Information & Contributors

Information

Published In

Human-Computer Interaction – INTERACT 2015

627 pages

ISBN:978-3-319-22700-9

DOI:10.1007/978-3-319-22701-6

Editors:
Julio Abascal
Universidad del País Vasco/Euskal Herriko Unibertsitatea, Donostia-San Sebastián, Spain
,
Simone Barbosa
PUC-Rio, Rio de Janeiro, Brazil
,
Mirko Fetter
University of Bamberg, Bamberg, Germany
,
Tom Gross
University of Bamberg, Bamberg, Germany
,
Philippe Palanque
University Paul Sabatier, Toulouse, France
,
Marco Winckler
University Paul Sabatier, Toulouse, France

Publisher

Springer-Verlag

Berlin, Heidelberg

Publication History

Published: 10 March 2022

Author Tags

Qualifiers

Article

Contributors

Other Metrics

View Article Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

21
Total Citations
View Citations
0
Total Downloads

Downloads (Last 12 months)0
Downloads (Last 6 weeks)0

Reflects downloads up to 26 Nov 2024

Other Metrics

View Author Metrics

Citations

Cited By

View all

Palma GPourjafarian NSteimle JCignoni P(2024)Capacitive Touch Sensing on General 3D SurfacesACM Transactions on Graphics10.1145/365818543:4(1-20)Online publication date: 19-Jul-2024
https://dl.acm.org/doi/10.1145/3658185
Duente TSchrapel MSchulte JJanßen NAl-Azzawi IDemir KRohs M(2024)A Touch of Gold - Spraying and Electroplating 3D Prints to Create Biocompatible On-Skin WearablesAdjunct Proceedings of the 26th International Conference on Mobile Human-Computer Interaction10.1145/3640471.3680227(1-7)Online publication date: 21-Sep-2024
https://dl.acm.org/doi/10.1145/3640471.3680227
Lin YJo J(2024)LeatherBoard: Sustainable On-body Rapid Prototyping with Leather Scraps and Machine EmbroideryExtended Abstracts of the CHI Conference on Human Factors in Computing Systems10.1145/3613905.3650894(1-7)Online publication date: 11-May-2024
https://dl.acm.org/doi/10.1145/3613905.3650894
Campos Zamora DDogan MSiu AKoh EXiao C(2024)MoiréWidgets: High-Precision, Passive Tangible Interfaces via Moiré EffectProceedings of the 2024 CHI Conference on Human Factors in Computing Systems10.1145/3613904.3642734(1-10)Online publication date: 11-May-2024
https://dl.acm.org/doi/10.1145/3613904.3642734
Bae SFujiwara TYnnerman ADo ERivera MSzafir D(2024)A Computational Design Pipeline to Fabricate Sensing Network PhysicalizationsIEEE Transactions on Visualization and Computer Graphics10.1109/TVCG.2023.332719830:1(913-923)Online publication date: 1-Jan-2024
https://dl.acm.org/doi/10.1109/TVCG.2023.3327198
Alalawi MPacik-Nelson NZhu JGreenspan BDoan AWong BOwen-Block BMickens SSchoeman WWessely MDanielescu AMueller S(2023)MechSense: A Design and Fabrication Pipeline for Integrating Rotary Encoders into 3D Printed MechanismsProceedings of the 2023 CHI Conference on Human Factors in Computing Systems10.1145/3544548.3581361(1-14)Online publication date: 19-Apr-2023
https://dl.acm.org/doi/10.1145/3544548.3581361
Feng SYao CLin WYao JZhang CJia ZLiu LBokola MChen HYing FWang G(2023)MechCircuit: Augmenting Laser-Cut Objects with Integrated Electronics, Mechanical Structures and MagnetsProceedings of the 2023 CHI Conference on Human Factors in Computing Systems10.1145/3544548.3581002(1-15)Online publication date: 19-Apr-2023
https://dl.acm.org/doi/10.1145/3544548.3581002
Ko DKim YZhu JWessely MMueller S(2023)FlexBoard: A Flexible Breadboard for Interaction Prototyping on Curved and Deformable SurfacesProceedings of the 2023 CHI Conference on Human Factors in Computing Systems10.1145/3544548.3580748(1-13)Online publication date: 19-Apr-2023
https://dl.acm.org/doi/10.1145/3544548.3580748
Parilusyan BTeyssier MMartinez-Missir VDuhart CSerrano M(2022)SensurfacesProceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies10.1145/35346166:2(1-19)Online publication date: 7-Jul-2022
https://dl.acm.org/doi/10.1145/3534616
Schön DKosch TSchmitz MMüller FGünther SKreutz JMühlhäuser M(2022)TrackItPipe: A Fabrication Pipeline To Incorporate Location and Rotation Tracking Into 3D Printed ObjectsAdjunct Proceedings of the 35th Annual ACM Symposium on User Interface Software and Technology10.1145/3526114.3558719(1-5)Online publication date: 29-Oct-2022
https://dl.acm.org/doi/10.1145/3526114.3558719
Show More Cited By

View Options

View options

Login options

Check if you have access through your login credentials or your institution to get full access on this article.

Abstract

References

Cited By

Index Terms

Recommendations

Capricate: A Fabrication Pipeline to Design and 3D Print Capacitive Touch Sensors for Interactive Objects

Designing Vibrotactile Widgets with Printed Actuators and Sensors

A Touch of Gold - Spraying and Electroplating 3D Prints to Create Biocompatible On-Skin Wearables

Comments

Information

Published In

Publisher

Publication History

Author Tags

Qualifiers

Contributors

Other Metrics

Bibliometrics

Article Metrics

Other Metrics

Citations

Cited By

View options

Login options

Full Access

Figures

Other

Share

Share this Publication link

Share on social media

Affiliations