Introducing simulation and optimization in the lean continuous improvement standards in an automotive company
Authors: 
Ainhoa Goienetxea Uriarte, Amos H. C. Ng, Tommy Sellgren, Matías Urenda MorisAuthors Info & Claims
Pages 3352 - 3363
Abstract
The highly competitive automobile market requires automotive companies to become efficient by continuously improving their production systems. This paper presents a case study where simulation-based optimization (SBO) was employed as a step within a Value Stream Mapping event. The aim of the study was to promote the use of SBO to strengthen the continuous improvement work of the company. The paper presents all the key steps performed in the study, including the challenges faced and a reflection on how to introduce SBO as a powerful tool within the lean continuous improvement standards.
References
[1]
Abdulmalek, F. A., and J. Rajgopal. 2007. "Analyzing the Benefits of Lean Manufacturing and Value Stream Mapping Via Simulation: A Process Sector Case Study". International Journal of Production Economics 107 (1):223--236.
[2]
Adams, M., P. Componation, H. Czarnecki, and B. J. Schroer. 1999. "Simulation as a Tool for Continuous Process Improvement". In Proceedings of the 1999 Winter Simulation Conference, edited by P.A. Farrington et al., 766--773. Piscataway, New Jersey: IEEE.
[3]
Anand, G., and R. Kodali. 2009. "Simulation Model for the Design of Lean Manufacturing Systems - a Case Study". International Journal of Productivity and Quality Management 4 (5--6):691--714.
[4]
Anand, G., and R. Kodali. 2010. "Development of a Framework for Implementation of Lean Manufacturing Systems". International Journal of Management Practice 4 (1):95--116.
[5]
April, J., M. Better, F. Glover, and J. Kelly. 2004. "New Advances and Applications for Marrying Simulation and Optimization". In Proceedings of the 2004 Winter Simulation Conference, edited by R.G. Ingalls et al., 80--86. Piscataway, New Jersey: IEEE.
[6]
Atieh, A. M., H. Kaylani, A. Almuhtady, and O. Al-Tamimi. 2016. "A Value Stream Mapping and Simulation Hybrid Approach: Application to Glass Industry". International Journal of Advanced Manufacturing Technology 84 (5--8):1573--1586.
[7]
Bicheno, J., and M. Holweg. 2009. The Lean Toolbox: The Essential Guide to Lean Transformation. 4th ed. Buckingham, United Kingdom: PICSIE Books.
[8]
Braglia, M., M. Frosolini, and F. Zammori. 2009. "Uncertainty in Value Stream Mapping Analysis". International Journal of Logistics Research and Applications 12 (6):435--453.
[9]
Diamond, R., C. R. Harrell, J. O. Henriksen, W. B. Nordgren, C. Dennis Pegden, M. W. Rohrer, A. P. Waller, and A. M. Law. 2002. "The Current and Future Status of Simulation Software (Panel)". In Proceedings of the 2002 Winter Simulation Conference, edited by E. Yücesan et al., 1633--1640. Piscataway, New Jersey: IEEE.
[10]
Frantzen, M., and A. H. C. Ng. 2016. "Production Simulation Education Using Rapid Modeling and Optimization: Successful Studies". In Proceedings of the 2016 Winter Simulation Conference, edited by L. Yilmaz et al., 3526--3537, Piscataway, New Jersey: IEEE.
[11]
Goienetxea Uriarte, A., M. Urenda Moris, A. H. C. Ng, and J. Oscarsson. 2015. "Lean, Simulation and Optimization: A Win-Win Combination". In Proceedings of the 2015 Winter Simulation Conference, edited by L. Yilmaz et al., 2227--2238. Piscataway, New Jersey: IEEE.
[12]
Goienetxea Uriarte, A., M. Urenda Moris, and M. Jägstam. 2017. "Lean, Simulation and Optimization: A Maturity Model". In Proceedings of the 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), December 10--13<sup>th</sup>, Singapore, 1310--1315. IEEE.
[13]
Gurumurthy, A., and R. Kodali. 2011. "Design of Lean Manufacturing Systems Using Value Stream Mapping with Simulation a Case Study". Journal of Manufacturing Technology Management 22 (4):444--473.
[14]
Helleno, A. L., C. A. Pimentel, R. Ferro, P. F. Santos, M. C. Oliveira, and A. T. Simon. 2015. "Integrating Value Stream Mapping and Discrete Events Simulation as Decision Making Tools in Operation Management". The International Journal of Advanced Manufacturing Technology 80 (5):1059--1066.
[15]
Jain, S., Lechevalier, D., Woo, J. and Shin, S.J. 2015. "Towards a Virtual Factory Prototype". In Proceedings of the 2015 Winter Simulation Conference, edited by L. Yilmaz et al. 2207--2218. Piscataway, New Jersey: IEEE.
[16]
Jia, Y. 2010. Simlean: A Reference Framework for Embedding Simulation in Lean Projects. Ph.D. thesis. Sheffield Hallam University, United Kingdom.
[17]
Law, A. M., and W. D. Kelton. 1991. Simulation Modeling & Analysis. 2nd ed. New York: McGraw-Hill.
[18]
Lian, Y. H., and H. Van Landeghem. 2007. "Analysing the Effects of Lean Manufacturing Using a Value Stream Mapping-Based Simulation Generator". International Journal of Production Research 45 (13):3037--3058.
[19]
Liker, J. K. 2004. The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer. New York: McGraw-Hill
[20]
Marvel, J. H., and C. R. Standridge. 2009. "Simulation-Enhanced Lean Design Process". Journal of Industrial Engineering and Management 2(1):90--113.
[21]
McDonald, T., E. M. Van Aken, and A. F. Rentes. 2002. "Utilising Simulation to Enhance Value Stream Mapping: A Manufacturing Case Application". International Journal of Logistics Research and Applications 5(2):213--232.
[22]
Negahban, A., and J. S. Smith. 2014. "Simulation for Manufacturing System Design and Operation: Literature Review and Analysis". Journal of Manufacturing Systems 33 (2):241--261.
[23]
Pehrsson, L. 2013. Manufacturing Management and Decision Support Using Simulation-Based Multi-Objective Optimisation. Ph.D. thesis. University of Skövde, Virtual Systems Research Centre and School of Technology and Society, De Montfort University, Leicester.
[24]
Pehrsson, L, A. H. C. Ng, and J. Bernedixen. 2016. "Automatic Identification of Constraints and Improvement Actions in Production Systems Using Multi-objective Optimization and Post-optimality Analysis". Journal of manufacturing systems 39:24--37.
[25]
Robinson, S., Z. J. Radnor, N. Burgess, and C. Worthington. 2012. "Simlean: Utilising Simulation in the Implementation of Lean in Healthcare". European Journal of Operational Research 219 (1):188--197.
[26]
Rodic, B. 2017. "Industry 4.0 and the New Simulation Modelling Paradigm". Organizacija. Journal of Management, Informatics and Human Resources 50(3):193--207.
[27]
Rother, M., and J. Shook. 1999. Learning to See: Value Stream Mapping to Add Value and Eliminate Muda. Brooklin, MA.: The Lean Enterprise Institute, Inc.
[28]
Sargent, R. G. 2011. "Verification and Validation of Simulation Models". In Proceedings of the 2011 Winter Simulation Conference, edited by S. Jain et al., 183--198. Piscataway, New Jersey: IEEE.
[29]
Schmidtke, D., U. Heiser, and O. Hinrichsen. 2014. "A Simulation-Enhanced Value Stream Mapping Approach for Optimisation of Complex Production Environments". International Journal of Production Research 52 (20):6146--6160.
[30]
Shou, W., J. Wang, P. Wu, X. Wang, and H. Y. Chong. 2017. "A Cross-Sector Review on the Use of Value Stream Mapping". International Journal of Production Research 55 (13):3906--3928.
[31]
Singh, J., and H. Singh. 2015. "Continuous Improvement Philosophy - Literature Review and Directions". Benchmarking 22 (1):75--119.
[32]
Solding, P., and P. Gullander. 2009. "Concepts for Simulation Based Value Stream Mapping". In Proceedings of the 2009 Winter Simulation Conference, edited by M. D. Rossetti et al., 2231--2237. Piscataway, New Jersey: IEEE.
[33]
Standridge, C. R., and J. H. Marvel. 2006. "Why Lean Needs Simulation". In Proceedings of the 2006 Winter Simulation Conference, edited by L. F. Perrone et al., 1907--1913. Piscataway, New Jersey: IEEE.
- Introducing simulation and optimization in the lean continuous improvement standards in an automotive company
Recommendations
The improvement of glowworm swarm optimization for continuous optimization problems
Glowworm swarm optimization (GSO) algorithm is the one of the newest nature inspired heuristics for optimization problems. In order to enhances accuracy and convergence rate of the GSO, two strategies about the movement phase of GSO are proposed. One is ...
Example-based learning particle swarm optimization for continuous optimization
Particle swarm optimization (PSO) is a heuristic optimization technique based on swarm intelligence that is inspired by the behavior of bird flocking. The canonical PSO has the disadvantage of premature convergence. Several improved PSO versions do well ...
Hybridization strategies for continuous ant colony optimization and particle swarm optimization applied to data clustering
Ant colony optimization (ACO) and particle swarm optimization (PSO) are two popular algorithms in swarm intelligence. Recently, a continuous ACO named ACOR was developed to solve the continuous optimization problems. This study incorporated ACOR with ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
Sponsors
Publisher
IEEE Press
Publication History
Published: 09 December 2018
Check for updates
Qualifiers
- Research-article
Conference
WSC '18
Sponsor:
Acceptance Rates
WSC '18 Paper Acceptance Rate 183 of 260 submissions, 70%;
Overall Acceptance Rate 3,413 of 5,075 submissions, 67%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 38Total Downloads
- Downloads (Last 12 months)2
- Downloads (Last 6 weeks)0
Reflects downloads up to 13 Nov 2024
Other Metrics
Citations
View Options
Get Access
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in