This paper describes a method to represent and predict the melting and solidifying shape of metal powder materials in the selective laser melting (SLM) method of metal addition manufacturing using a small number of physical properties. This is a processing method to complete a three-dimensional modeling object by layer-by-layer stacking. A laser beam is used to create objects with minimal voids and distortion by appropriately setting the scanning speed, output intensity, spot diameter, hatch spacing, and other conditions. Repeating actual experiments to determine the optimal build conditions increases the cost of operating the machine, such as electricity and labor, and the cost of materials when a modeling failure occurs. In recent years, attempts have been made to determine the optimal build conditions by analyzing the melting and solidification phenomena of metallic materials through precise simulations. However, it is necessary to set many physical property values as the parameters. Many physical property values are difficult to measure, and if these values are incorrect, the analysis results can differ significantly. In this study, a theoretical model for predicting the cross-sectional area and cross-sectional thickness of the melt pool using a single-track laser was developed using a small number of physical properties, such as melting point, thermal conductivity, and latent heat. To further examine the validity of the theoretical model, experiments were conducted for comparison purposes. In this experiment, 5 × 1 × 1 mm rectangular specimens were stacked and fabricated by a metal additive manufacturing machine using different laser beam irradiation conditions. The fabricated samples were cut, polished, and etched with nital, and the melt pool shapes were measured. Finally, experimental and theoretical values were compared to confirm the validity of the constructed theoretical model. This indicates that the proposed model can predict the melt pool shape.

1. [1] T. Arai, “Technical Review of Laser Materials Processing in Japan,” Int. J. Automation Technol., Vol.10, No.6, pp. 854-862, 2016.
2. [2] H. Furukawa, “Powder Laser Sintering RP System (EOSINT): Its Updates and Applications to Product Manufacturing,” Int. J. Automation Technol., Vol.2, No.6, pp. 468-471, doi: 10.20965/ijat.2008.p0468, 2008.
3. [3] J. Potgieter, O. Diegel, F. Noble, and M. Pike, “Additive Manufacturing in the Context of Hybrid Flexible Manufacturing Systems,” Int. J. Automation Technol., Vol.6, No.5, pp. 627-632, doi: 10.20965/ijat.2012.p0627, 2012.
4. [4] K. Yamazawa, M. Anzai, H. Yokota, R. Himeno, H. Suzuki, H. Narahara, and S. Suzuki, “Trial Formation of Artificial Bone by Inkjet Powder-Layered Manufacturing,” Int. J. Automation Technol., Vol.2, No.3, pp. 156-161, doi: 10.20965/ijat.2008.p0156, 2008.
5. [5] S. Ishibashi, K. Shimada, H. Kanetaka, M. Tsukuda, T. Mizoi, M. Chuzenji, S. Kikuchi, M. Mizutani, and T. Kuriyagawa, “Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting,” Int. J. Automation Technol., Vol.14, No.4, pp. 582-591, doi: 10.20965/ijat.2020.p0582, 2020.
6. [6] H. Koresawa, H. Fukumaru, M. Kojima, J. Iwanaga, H. Narahara, and H. Suzuki, “Design Method for Inner Structure of Injection Mold Fabricated by Metal Laser Sintering,” Int. J. Automation Technol., Vol.6, No.5, pp. 584-590, 2012.
7. [7] M. A. Kottman, “Additive manufacturing of maraging 250 steels for the rejuvenation and repurposing of die casting tooling,” Case Western Reserve University, 2015.
8. [8] H. Narahara, S. Takeshita, H. Fukumaru, H. Koresawa, and H. Suzuki, “Permeability Performance on Porous Structure of Injection Mold Fabricated by Metal Laser Sintering Combined with High Speed Milling,” Int. J. Automation Technol., Vol.6, No.5, pp. 576-583, 2012.
9. [9] H. Koresawa, K. Tanaka, and H. Narahara, “Low-Energy Injection Molding Process by a Mold With Permeability Fabricated by Additive Manufacturing,” Int. J. Automation Technol., Vol.10, No.1, pp. 101-105, 2016.
10. [10] H. Koresawa, H. Fujimaru, and H. Narahara, “Improvement in the Permeability Characteristics of Injection Mold Fabricated by Additive Manufacturing and Irradiated by Electron Beams,” Int. J. Automation Technol., Vol.11, No.1, pp. 97-103, 2017.
11. [11] H. Chiba, T. Furumoto, Y. Hori, M. Nikawa, N. Hayashi, and M. Yamaguchi, “Fabrication of Release Agent Supply Die with Porous Structure Using Metal-Based Additive Manufacturing,” Int. J. Automation Technol., Vol.15, No.6, pp. 868-877, 2021.
12. [12] A. Tawfik, P. Bills, L. Blunt, and R. Racasan, “Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography,” Int. J. Automation Technol., Vol.14, No.3, pp. 439-446, doi: 10.20965/ijat.2020.p0439, 2020.
13. [13] A. Tawfik, M. Radwan, M. A. Attia, P. Bills, R. Racasan, and L. Blunt, “The Detection of Unfused Powder in EBM and SLM Additive Manufactured Components,” Int. J. Automation Technol., Vol.14, No.6, pp. 1025-1035, 2020.
14. [14] S. Takushima, N. Shinohara, D. Morita, H. Kawano, Y. Mizutani, and Y. Takaya, “In-Process Height Displacement Measurement Using Crossed Line Beams for Process Control of Laser Wire Deposition,” Int. J. Automation Technol., Vol.15, No.5, pp. 715-727, 2021.
15. [15] A. L. de Oliveira, “Effect of Heat Treatment on SLM Maraging C-300 Steel Parts,” Universidade do Porto, 2019.
16. [16] X. Zhou, Y. Zhong, Z. Shen, and W. Liu, “The surface-tension-driven Benard conventions and unique sub-grain cellular microstructures in 316L steel selective laser melting,” arXiv: 1801.01408, 2018.
17. [17] K. Egashira, T. Furumoto, K. Hishida, S. Abe, T. Koyano, Y. Hashimoto, and A. Hosokawa, “Formation Mechanism of Pores Inside Structure Fabricated by Metal-Based Additive Manufacturing,” Int. J. Automation Technol., Vol.13, No.3, pp. 330-337, 2019.
18. [18] A. Hirayama, M. Kimura, M. Kusaka, and K. Kaizu, “Microstructure and Mechanical Properties of AlSi12CuNi Alloy Fabricated by Laser Powder Bed Fusion Process,” Int. J. Automation Technol., Vol.15, No.4, pp. 388-395, 2021.
19. [19] N. Seto and H. Sato, “Deposition Conditions for Laser Formation Processes with Filler Wire,” Int. J. Automation Technol., Vol.10, No.6, pp. 899-908, 2016.
20. [20] R. Koike, T. Misawa, Y. Kakinuma, and Y. Oda, “Basic study on remelting process to enhance density of Inconel 625 in direct energy deposition,” Int. J. Automation Technol., Vol.12, No.3, pp. 424-433, 2018.
21. [21] J. L. Z. Li, M. R. Alkahari, N. A. B. Rosli, R. Hasan, M. N. Sudin, and F. R. Ramli, “Review of Wire Arc Additive Manufacturing for 3D Metal Printing,” Int. J. Automation Technol., Vol.13, No.3, pp. 346-353, 2019.
22. [22] Y.-C. Wu et al., “Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation,” J. of Materials Processing Technology, Vol.254, pp. 72-78, doi: 10.1016/j.jmatprotec.2017.11.032, 2018.
23. [23] E. Mirkoohi, J. R. Dobbs, and S. Y. Liang, “Analytical mechanics modeling of in-process thermal stress distribution in metal additive manufacturing,” J. of Manufacturing Processes, Vol.58, pp. 41-54, doi: 10.1016/j.jmapro.2020.08.009, 2020.
24. [24] Y. Hirata, S. Hirose, S. Ogaki, Y. Asai, and T. Ohji, “Modeling of Heat and Fluid Flow in Weld Pool by Stationary Gas Tungsten Arc. Analytical Study of Penetration Process in GTA Welding. (1),” Quarterly J. of the Japan Welding Society, Vol.18, No.4, pp. 540-548, doi: 10.2207/qjjws.18.540, 2000.
25. [25] M. Tong and D. J. Browne, “Smoothed particle hydrodynamics modelling of the fluid flow and heat transfer in the weld pool during laser spot welding,” IOP Conf. Series: Materials Science and Engineering, Vol.27, doi: 10.1088/1757-899x/27/1/012080, 2012.
26. [26] A. Foroozmehr, M. Badrossamay, E. Foroozmehr, and S. Golabi, “Finite Element Simulation of Selective Laser Melting Process Considering Optical Penetration Depth of Laser in Powder Bed,” Materials & Design, Vol.89, pp. 255-263, doi: 10.1016/j.matdes.2015.10.002, 2016.
27. [27] M. Chiumenti et al., “Numerical modelling and experimental validation in Selective Laser Melting,” Additive Manufacturing, Vol.18, pp. 171-185, doi: 10.1016/j.addma.2017.09.002, 2017.
28. [28] E. Mirkoohi, J. Ning, P. Bocchini, O. Fergani, K.-N. Chiang, and S. Liang, “Thermal Modeling of Temperature Distribution in Metal Additive Manufacturing Considering Effects of Build Layers, Latent Heat, and Temperature-Sensitivity of Material Properties,” J. of Manufacturing and Materials Processing, Vol.2, No.3, doi: 10.3390/jmmp2030063, 2018.
29. [29] N. Li et al., “Progress in additive manufacturing on new materials: A review,” J. of Materials Science & Technology, Vol.35, No.2, pp. 242-269, doi: 10.1016/j.jmst.2018.09.002, 2019.
30. [30] C. Turk, H. Zunko, C. Aumayr, H. Leitner, and M. Kapp, “Advances in Maraging Steels for Additive Manufacturing,” BHM Berg- und Hüttenmännische Monatshefte, Vol.164, No.3, pp. 112-116, doi: 10.1007/s00501-019-0835-z, 2019.
31. [31] I. Yadroitsev, P. Krakhmalev, I. Yadroitsava, S. Johansson, and I. Smurov, “Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder,” J. of Materials Processing Technology, Vol.213, No.4, pp. 606-613, doi: 10.1016/j.jmatprotec.2012.11.014, 2013.
32. [32] C. Y. Yap et al., “Review of selective laser melting: Materials and applications,” Applied Physics Reviews, Vol.2, No.4, doi: 10.1063/1.4935926, 2015.
33. [33] R. Koike, I. Unotoro, Y. Kakinuma, and Y. Oda, “Graded Inconel 625–SUS316L Joint Fabricated Using Directed Energy Deposition,” Int. J. Automation Technol., Vol.13, No.3, pp. 338-345, 2019.
34. [34] M. Seifi, A. Salem, J. Beuth, O. Harrysson, and J. J. Lewandowski, “Overview of Materials Qualification Needs for Metal Additive Manufacturing,” JOM, Vol.68, No.3, pp. 747-764, doi: 10.1007/s11837-015-1810-0, 2016.