This paper describes a new solution to control the induction motor drive system without current sensors based on improving the Hysteresis Pulse Width Modulation technique. It has proposed a control scheme which uses stator currents estimated from the differential equation of state variables to replace the feedback signal from current sensors applied in the hysteresis current controller. To verify the proposed method, simulations in MATLAB/Simulink have been implemented in various operating conditions of the motor where its speed has been changed under load as well as no load conditions. The simulation results have demonstrated the effectiveness of the proposed control method for inductive motor drives.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.