Author Correction: 3D-printed liquid metal polymer composites as NIR-responsive 4D printing soft robot

Authors and Affiliations

1. Australian Institute of Bioengineering & Nanotechnology, The University of Queensland, Brisbane, QLD, 4072, Australia

   Liwen Zhang, Xumin Huang, Hongda Lu, Jiangyu Hang, Thomas P. Davis & Ruirui Qiao

2. Department of Electronic, Electrical, and Systems Engineering, University of Birmingham, Birmingham, UK

   Tim Cole

3. School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, NSW, 2522, Australia

   Hongda Lu & Weihua Li

4. School of Electronics and Computer Science, University of Southampton, Southampton, SO17 1BJ, UK

   Shi-Yang Tang

5. Cluster for Advanced Macromolecular Design, School of Chemical Engineering, The University of New South Wales, Sydney, NSW, 2052, Australia

   Cyrille Boyer

Corresponding authors

Correspondence to Shi-Yang Tang, Thomas P. Davis or Ruirui Qiao.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions