Nothing Special   »   [go: up one dir, main page]
Skip to main content
Springer Nature Link
Log in

Surface roughness monitoring application based on artificial neural networks for ball-end milling operations

  • Published:
Journal of Intelligent Manufacturing Aims and scope Submit manuscript

Abstract

Surface roughness plays an important role in the performance of a finished part. The roughness is usually measured off-line when the part is already machined, although in recent years the trend seems to have been to focus on online monitoring. Measuring and controlling the machining process is now possible thanks to improvements and advances in the fields of computers and sensors. The aim of this work was to develop a reliable surface roughness monitoring application based on an artificial neural network approach for vertical high speed milling operations. Experimentation was carried out to obtain data that was used to train the artificial neural network. Geometrical cutting factors, dynamic factors, part geometries, lubricants, materials and machine tools were all considered. Vibration was captured on line with two piezoelectric accelerometers placed following the X and Y axes of the machine tool.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Abbreviations

Ae:

Radial depth of cut (mm)

Ap:

Axial depth of cut (mm)

C.L.A.:

Center line average

Cs:

Cutting section (mm2)

f :

Feed rate (mm/ min)

ft:

Tooth passing frequency (Hz)

fs:

Sampling frequency (Hz)

fz:

Feed per tooth (mm/z)

h :

Surface crest height (mm)

H :

Material hardness (HRC)

hx, hy:

High frequency vibration amplitude in X and Y axes

K :

Power coefficient

Lm:

Length of measurement

lx, ly:

Low frequency vibration amplitude in X and Y axes

MQL:

Minimum quantity of lubricant

MRR:

Material removal rate (mm3/min)

mx, my:

Medium frequency vibration amplitude in X and Y axes

N :

Spindle speed (rpm)

O :

Cutting tool overhang (mm)

P :

Power required (P)

R :

Cutter radius (mm)

Ra:

Roughness average (μm)

Rat:

Theoretical roughness average (μm)

tdx, tdy:

Temporal domain vibration amplitude in X and Y axes

tpx, tpy:

Tooth passing frequency vibration amplitude in X and Y axes

Vc:

Cutting speed (m/min)

W :

Tool wear

y :

Vertical deviation from the nominal surface

Z :

Number of teeth

References

  • Abouelatta O. B., Mádl J. (2001) Surface roughness prediction based on cutting parameters and tool vibrations in turning operations. Journal of Materials Processing Technology 118(1–3): 269–277

    Article  Google Scholar 

  • ASCAMM Technology Centre, cutOPT. http://www.youtube.com/watch?v=v5nJZodMemY.

  • Benardos, P. G., & Vosniakos, G. (2003). Predicting surface roughness in machining: a review. International Journal of Machine Tools and Manufacture, 6:43(8):833–844.

    Google Scholar 

  • Brezocnik M., Kovacic M. (2003) Integrated genetic programming and genetic algorithm approach to predict surface roughness. Materials and Manufacturing Processes 18(3): 475–491

    Article  Google Scholar 

  • Brinksmeier E., Aurich J. C., Govekar E., Heinzel C., Hoffmeister H., Klocke F. et al (2006) Advances in modeling and simulation of grinding processes. CIRP Annals-Manufacturing Technology 55(2): 667–696

    Article  Google Scholar 

  • Chang H., Kim J., Kim I. H., Jang D. Y., Han D. C. (2007) In-process surface roughness prediction using displacement signals from spindle motion. International Journal of Machine Tools and Manufacture 47(6): 1021–1026

    Article  Google Scholar 

  • Chen J. C., Lou M. S. (2000) Fuzzy-nets based approach to using an accelerometer for an in-process surface roughness prediction system in milling operations. International Journal of Computer Integrated Manufacturing 13(4): 358–368

    Article  Google Scholar 

  • Chukwujekwu Okafor A., Adetona O. (1995) Predicting quality characteristics of end-milled parts based on multi-sensor integration using neural networks: individual effects of learning parameters and rules. Journal of Intelligent Manufacturing 6(6): 389–400

    Article  Google Scholar 

  • Ciurana J., Arias G., Ozel T. (2009) Neural network modeling the influence of process parameters on feature geometry and surface quality in pulsed laser micro-machining of hardened AISI H13 steel. Materials and Manufacturing Processes 24(3): 1–11

    Article  Google Scholar 

  • Correa, M., Bielza, C., & Pamies-Teixeira, J. (2009). Comparison of Bayesian networks and artificial neural networks for quality detection in a machining process. Expert systems with applications.

  • Correa M., Bielza C., Ramirez M. D. J., Alique J. R. (2008) A Bayesian network model for surface roughness prediction in the machining process. International Journal of Systems Science 39(12): 1181–1192

    Article  Google Scholar 

  • Dewes R. C., Aspinwall D. K. (1997) A review of ultra high speed milling of hardened steels. Journal of Materials Processing Technology 69(1–3): 1–17

    Article  Google Scholar 

  • Ghani A.K., Choudhury I.A., (2002) Study of tool life, surface roughness and viberation in machinning nodular cast iron with ceramic tool. Journal of Materials Processing Technology 127(1): 17–22

    Article  Google Scholar 

  • Grzesik W. (2008) Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear 265(3–4): 327–335

    Article  Google Scholar 

  • Groover M. P. (2004) Society of manufacturing engineers. Fundamentals of modern manufacturing: Materials processes and systems (2nd ed.). Wiley, New York

    Google Scholar 

  • Huang B., Chen J. C. (2003) An in-process neural network-based surface roughness prediction (INN-SRP) system using a dynamometer in end milling operations. International Journal of Advanced Manufacturing Technology 21(5): 339–347

    Article  Google Scholar 

  • López, de., Lacalle, L. N., & Lamikiz A. (Eds.). (2008). Machine Tools for High Performance Machining

  • Markopoulos A. P., Manolakos D. E., Vaxevanidis N. M. (2008) Artificial neural network models for the prediction of surface roughness in electrical discharge machining. Journal of Intelligent Manufacturing 19(3): 283–292

    Article  Google Scholar 

  • Martellotti M. E. (1941) An analysis of the milling process. Transactions of ASME 63: 667

    Google Scholar 

  • Martellotti M. E. (1945) An analysis of the milling process. Part II: Down milling. Transactions of ASME 67: 233–649

    Google Scholar 

  • Quintana G., Ciurana J., Ferrer I., Rodríguez C. A. (2009) Sound mapping for identification of stability lobe diagrams in milling processes. International Journal of Machine Tools and Manufacture 49(3–4): 203–211

    Article  Google Scholar 

  • Quintana, G., Ribatallada, J., & Ciurana, Q. (2010). Surface roughness generation and material removal rate in ball end milling operations. Materials and manufacturing processes. (In press).

  • Risbood K. A., Dixit U. S., Sahasrabudhe A. D. (2003) Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process. Journal of Materials Processing Technology 132(1–3): 203–214

    Article  Google Scholar 

  • Samanta B., Erevelles W., Omurtag Y. (2008) Prediction of workpiece surface roughness using soft computing. Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture 222(10): 1221–1232

    Article  Google Scholar 

  • Sharma V. S., Dhiman S., Sehgal R., Sharma S. K. (2008) Estimation of cutting forces and surface roughness for hard turning using neural networks. Journal of Intelligent Manufacturing 19(4): 473–483

    Article  Google Scholar 

  • Thomas M., Beauchamp Y., Youssef A. Y., Masounave J. (1996) Effect of tool vibrations on surface roughness during lathe dry turning process. Computers & Industrial Engineering, Elsevier 31(3/4): 637–644

    Article  Google Scholar 

  • Tsai Y., Chen J. C., Lou S. (1999) An in-process surface recognition system based on neural networks in end milling cutting operations. International Journal of Machine Tools and Manufacture 39(4): 583–605

    Article  Google Scholar 

  • Zhang J. Z., Chen J. C., Kirby E. D. (2007) The development of an in-process surface roughness adaptive control system in turning operations. Journal of Intelligent Manufacturing 18(3): 301–311

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. ASCAMM Technology Centre, Barcelona, Spain

    G. Quintana

  2. Mechanical Engineering and Industrial Construction Department, University of Girona, Girona, Spain

    M. L. Garcia-Romeu & J. Ciurana

Authors
  1. G. Quintana
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. L. Garcia-Romeu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. J. Ciurana
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to J. Ciurana.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Quintana, G., Garcia-Romeu, M.L. & Ciurana, J. Surface roughness monitoring application based on artificial neural networks for ball-end milling operations. J Intell Manuf 22, 607–617 (2011). https://doi.org/10.1007/s10845-009-0323-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10845-009-0323-5

Keywords

Search

Navigation