Nothing Special   »   [go: up one dir, main page]
Skip to main content

Advertisement

Springer Nature Link
Log in

Towards a Semantic Driven Framework for Smart Grid Applications: Model-Driven Development Using CIM, IEC 61850 and IEC 61499

  • HAUPTBEITRAG
  • TOWARDS SEMANTIC DRIVEN FRAMEWORK
  • Published:
Informatik-Spektrum Aims and scope

Abstract

Power and energy systems are on the verge of a profound change where Smart Grid solutions will enhance their efficiency and flexibility. Advanced ICT and control systems are key elements of the Smart Grid to enable efficient integration of a high amount of renewable energy resources which in turn are seen as key elements of the future energy system. The corresponding distribution grids have to become more flexible and adaptable as the current ones in order to cope with the upcoming high share of energy from distributed renewable sources.

The complexity of Smart Grids requires to consider and imply many components when a new application is designed. However, a holistic ICT-based approach for modelling, designing and validating Smart Grid developments is missing today. The goal of this paper therefore is to discuss an advanced design approach and the corresponding information model, covering system, application, control and communication aspects of Smart Grids.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Arritt R, Dugan R (2011) Distribution system analysis and the future smart grid. In: Rural Electric Power Conference (REPC), 2011 IEEE, pp B2–1–B2–8, April 2011

  2. Bredillet P, Lambert E, Schultz E (2010) CIM, 61850, COSEM standards used in a model driven integration approach to build the smart grid service oriented architecture. In: 2010 First IEEE International Conference on Smart Grid Communications (SmartGridComm), IEEE, pp 467–471, October 2010

  3. Broy M (2007) Model-driven architecture-centric engineering of (embedded) software intensive systems: modeling theories and architectural milestones. Innov Syst Softw Eng 3:75–102, doi:10.1007/s11334-006-0011-y

    Article  Google Scholar 

  4. Collier SE (2010) Ten steps to a smarter grid. IEEE Ind Appl Mag 16(2):62–68

    Article  Google Scholar 

  5. Dugan RC, Mcgranaghan M (2011) Sim city. IEEE Power Energ Mag 9(5):74–81

    Article  Google Scholar 

  6. EPRI (2009) Report to NIST on the Smart Grid Interoperability Standards Roadmap. Tech. rep., Electric Power Research Institute (EPRI), USA, www.epri.com, last access 25.4.2012

  7. Hegny I, Wenger M, Zoitl A (2010) IEC 61499 based simulation framework for model-driven production systems development. In: 2010 IEEE Conference on Emerging Technologies and Factory Automation (ETFA), pp 1–8, September 2010

  8. Higgins N, Vyatkin V, Nair NKC, Schwarz K (2010) Distributed Power System Automation with IEC 61850, IEC 61499, and Intelligent Control. IEEE T Syst Man Cy C 99:1–12

    Google Scholar 

  9. Hohpe G, Woolf B (2003) Enterprise Integration Patterns: Designing, Building, and Deploying Messaging Solutions. Addison-Wesley Longman Publishing Co., Boston, MA, USA

    Google Scholar 

  10. IEC TC 57 (2010) IEC 61850: Communication networks and systems for power utility automation. Tech. Rep. IEC 61850, International Electrotechnical Commission, Geneva, Switzerland, www.iec.ch, last access 25.4.2012

  11. IEC TC 57 (2010) IEC 61968: Application integration at electric utilities – System interfaces for distribution management – Part 11: Common information model (CIM) extensions for distribution. Tech. Rep. Ed. 1.0, International Electrotechnical Commission (IEC), Geneva, Switzerland (2010), http://www.iec.ch, last access 25.4.2012

  12. IEC TC 57 (2011) IEC 61970: Energy management system application program interface (EMS-API) – Part 301: Common information model (CIM) base. Tech. Rep. Ed. 3.0, International Electrotechnical Commission (IEC), Geneva, Switzerland, http://www.iec.ch, last access 25.4.2012

  13. IEC TC 65 (2003) IEC 61131: Programmable controllers – Part 3: Programming languages. Tech. Rep. Ed. 2.0, International Electrotechnical Commission (IEC), Geneva, Switzerland, http://www.iec.ch, last access 25.4.2012

  14. IEC TC 65 (2005) IEC 61499: Function blocks – Part 1–4. Tech. Rep. Ed. 1.0, International Electrotechnical Commission, Geneva, Switzerland, http://www.iec.ch, last access 25.4.2012

  15. Lopes JP, Hatziargyriou N, Mutale J, Djapic P, Jenkins N (2007) Integrating distributed generation into electric power systems: A review of drivers, challenges and opportunities. Electr Pow Syst Res 77(9):1189–1203, http://www.sciencedirect.com/science/article/pii/S0378779606001908, last access 25.4.2012

    Article  Google Scholar 

  16. McArthur S, Davidson E, Catterson V, Dimeas A, Hatziargyriou N, Ponci F, Funabashi T (2007) Multi-agent systems for power engineering applications – Part II: Technologies, standards, and tools for building multi-agent systems. IEEE T Pow Syst 22(4):1753–1759

    Article  Google Scholar 

  17. Nyeng P, Ostergaard J (2011) Information and communications systems for control-by-price of distributed energy resources and flexible demand. IEEE T Smart Grid 2(2):334–341

    Article  Google Scholar 

  18. Paulo R, Carvalho A (2005) Towards model-driven design of substation automation systems. In: 18th International Conference and Exhibition on Electricity Distribution. CIRED 2005, June 2005, IET, pp 1–5

  19. Pradeep Y, Seshuraju P, Khaparde S, Warrier V, Cherian S (2009) CIM and IEC 61850 integration issues: Application to power systems. In: Power Energy Society General Meeting, PES ’09, July 2009, IEEE, pp 1–6

  20. Santodomingo R, Rodriguez Mondejar J, Sanz-Bobi M (2010) Ontology matching approach to the harmonization of CIM and IEC 61850 standards. In: First IEEE International Conference on Smart Grid Communications (SmartGridComm), October 2010, pp 55–60

  21. Schmidt D (2006) Guest editor’s introduction: Model-driven engineering. Computer 39(2):25–31

    Article  Google Scholar 

  22. Schutte S, Scherfke S, Troschel M (2011) Mosaik: A framework for modular simulation of active components in smart grids. In: IEEE First International Workshop on Smart Grid Modeling and Simulation (SGMS), IEEE, October 2011, pp 55–60

  23. Stifter M, Bletterie B, Burnier D, Brunner H, Abart A (2011) Analysis environment for low voltage networks. In: IEEE First International Workshop on Smart Grid Modeling and Simulation (SGMS), October 2011, pp 61–66

  24. Strasser T, Rooker M, Hegny I, Wenger M, Zoitl A, Ferrarini L, Dede A, Colla M (2009) A research roadmap for model-driven design of embedded systems for automation components. In: 7th IEEE International Conference on Industrial Informatics. INDIN 2009, June 2009, pp 564–569

  25. Sztipanovits J, Karsai G (1997) Model-integrated computing. Computer 30(4):110–111

    Article  Google Scholar 

  26. Uslar M, Rohjans S, Specht M, Vazquez J (2010) What is the CIM lacking? In: Innovative Smart Grid Technologies Conference Europe (ISGT Europe), October 2010, IEEE PES, pp 1–8

  27. Zhu L, Shi D, Duan X (2011) Standard Function Blocks for Flexible IED in IEC 61850-Based Substation Automation. IEEE T Pow Deliv 26(2):1101–1110

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Energy Department – Electric Energy Systems, AIT Austrian Institute of Technology, Giefinggasse 2, 1210, Vienna, Austria

    Filip Andrén & Thomas Strasser

  2. Energy Department – Complex Energy Systems, AIT Austrian Institute of Technology, Giefinggasse 2, 1210, Vienna, Austria

    Matthias Stifter

Authors
  1. Filip Andrén
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Matthias Stifter
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Thomas Strasser
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Filip Andrén.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Andrén, F., Stifter, M. & Strasser, T. Towards a Semantic Driven Framework for Smart Grid Applications: Model-Driven Development Using CIM, IEC 61850 and IEC 61499. Informatik Spektrum 36, 58–68 (2013). https://doi.org/10.1007/s00287-012-0663-y

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00287-012-0663-y

Keywords

Search

Navigation