Abstract
The aerodynamic drag on a train running in an evacuated tube varies with tube air pressure, train speed and shape, as well as blockage ratio. This paper uses numerical simulations to study the effects of different factors on the aerodynamic drag of a train running at subsonic speed in an evacuated tube. Firstly, we present the assumption of a steady state, two dimensional, incompressible viscous flow with lubricity wall conditions. Subsequently, based on the Navier-Stokes equation and the k-ε turbulent models, we calculate the aerodynamic drag imposed on the column train with a 3-meter diameter running under different pressure and blockage ratio conditions in an evacuated tube transportation (ETT) system. The simulation is performed with FLUENT 6.3 software package. An analyses of the simulation results suggest that the blockage ratio for ETT should be in the range of 0.25–0.7, and the tube internal diameter in the range of 2–4 m, with the feasible vacuum pressure in the range of 1–10 000 Pa for the future subsonic ETT trains.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Y.P. Zhang, D. Oster, A New Industial Era Coming: Primary Dialogue on Evacuated Tube Transportation, Beijing: Tsinghua University Press, 2004.
B. Swartzwelter, Faster Than Jets: A Solution to America’s Long-term Transportation Problems, Portland: Alder Press, 2003.
D. Oster, M. Kumada, Y. P. Zhang, Evacuated tube transport technologies (ET3)tm: a maximum value global transportation network for passengers and cargo, Journal of Modern Transportation, 2011, 19(1): 42–50.
Y.P. Zhang, Y.Y. Li, Role and Position of ETT in The Future Comprehensive Transportation System, In: The Proceedings of International Conference on Transportation Engineering 2007, Chengdu, China, July 22-24, 2007: 2796–2803.
Y.P. Zhang, D. Oster, M. Kumada, et al., Key Vacuum Technologies to Be Solved in Evacuated Tube Transportation, Journal of Modern Transportation, 2011, 19(2): 110–113.
X. Zhou, Y.P. Zhang, Y.F. Yao, Numerical simulation on the aerodynamic drag of high-speed train in evacuated tube, Science Technology and Engineering, 2008, 28(6): 1671–1819 (in Chinese).
X. Zhou, D.Y. Zhang, Y.P. Zhang, Numerical simulation of blockage rate and aerodynamic dragof high-speed train in evacuated tube transportation, Chinese Journal of Vacuum Science and Technology, 2008, 28(6): 535–538 (in Chinese).
Y. Yu, Fluent Entrance and Promotion, Beijing: Institute of Technology Press, 2008 (in Chinese).
Z.N. Wu, Aerodynamics (Part II), Beijing: Tsinghua University Press, 2007: 6 (in Chinese).
Z.N. Wu, Aerodynamics (Part I), Beijing: Tsinghua University Press, 2007: 310–328 (in Chinese).
X.Y. Wang, Aerodynamics Base, Xi’an: Northwestern Polytechnical University Press, 2006: 13 (in Chinese).
Y.J. Qian, Aerodynamics, Beijing: Beijing University of Aeronautics and Astronautics Press, 2004: 403 (in Chinese).
Z.Z. Han, Fluent Fluid Engineering Simulation Examples and Application, Beijing: Beijing Institute of Technology Press, 2010 (in Chinese).
Y.P. Zhang, D. Oster, Primary analysis on tube section size of evacuated tube transportation, In: ICRE 2010 Proceeding, Beijing, Aug. 21-23, 2010: 67–72.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Y. Numerical simulation and analysis of aerodynamic drag on a subsonic train in evacuated tube transportation. J. Mod. Transport. 20, 44–48 (2012). https://doi.org/10.1007/BF03325776
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03325776