Abstract
The present paper studies some aspects of formulations of truss topology optimization problems. The ground structure approach-based formulations of three types of truss topology optimization problems, namely the problems of minimum weight design for a given compliance, of minimum weight design with stress constraints and of minimum weight design with stress constraints and local buckling constraints are examined. The common difficulties with the formulations of the three problems are discussed. Since the continuity of the constraint or/and objective function is an important factor for the determination of the mathematical structure of optimization problems, the issue of the continuity of stress, displacement and compliance functions in terms of the cross-sectional areas at zero area is studied. It is shown that the bar stress function has discontinuity at zero crosssectional area, and the structural displacement and compliance are continuous functions of the cross-sectional area. Based on the discontinuity of the stress function we point out the features of the feasible domain and global optimum for optimization problems with stress and/or local buckling constraints, and conclude that they are mathematical programming with discontinuous constraint functions and that they are essentially discrete optimization problems. The difference between topology optimization with global constraints such as structural compliance and that with local constraints on stress or/and local buckling is notable and has important consequences for the solution approach.
Similar content being viewed by others
References
Bendsøe, M.P.; Kikuchi, N. 1988: Generating optimal topologies in structural design using homogenization method.Comp. Meth. Appl. Mech. Eng. 71, 197–224
Bendsøe, M.P.; Mota Soares, C.A. (eds.) 1993:Topology optimization of structures. Dordrecht: Kluwer
Bendsøe, M.P.; Ben-Tal, A.; Zowe, J. 1994: Optimization methods for truss geometry and topology design.Struct. Optim. 7, 141–159
Cheng, G.D.; Jiang, Z. 1992: Study on topology optimization with stress constraints.Eng. Opt. 20, 129–148
Cheng, G.D.; Jiang, Z. 1994: Numerical performances of two topology optimization of truss structures.Acta Mechanica Sinica 6
Dobbs, M.W.; Felton, L.P. 1969: Optimization of truss geometry.J. Struct. Div. ASCE 95, 2105–2118
Dorn, G.; Gomory, R.; Greenberg, H. 1994: Automatic design of optimal structures.J. de Méc. 3, 25–52
Gu, Y.X.; Cheng, G.D. 1993: Topology optimization of truss structures with stress and buckling constraints. In: Valliappan, S.; Pulmano, V.A. and Tin-Loi, F. (eds.)Computational mechanics, pp. 918–922. Rotterdam: Balkema
Kirsch, U. 1989: Optimal topologies of structures.Appl. Mech. Rev. 42, pp. 223–238
Kirsch, U. 1990: On singular topologies in optimum structural design.Struct. Optim. 2, 133–142
Kirsch, U. 1993: Fundamental properties of optimal topologies. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology optimization of structures, pp. 3–18. Dordrecht: Kluwer
Kirsch, U. 1994: Singular and local optima in structural optimization.AIAA-94-4267-CP, Proc. AIAA/NASA/USAF/ISSMO 5th Symp. on Multidisciplinary Analysis and Optimization (held in Panama City, FL), pp. 150–156 Washington D.C.: AIAA
Pedersen, P. 1993: Topology optimization of three-dimensional trusses. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology opimization of structures, pp. 19–30. Dordrecht: Kluwer
Rozvany, G.I.N. 1993: Layout theory for grid-type structures. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology optimization of structures, pp. 251–272. Dordrecht: Kluwer
Rozvany, G.I.N.; Birker, T. 1994: On singular topologies in exact layout optimization.Struct. Optim. 8, 228–235
Sankaranarayanan, S.; Haftka, R.T.; Kapania, R.K. 1992: Truss topology optimization with simultaneous analysis and design.AIAA-92-2315-CP
Topping, B.H.V. 1993: Topology design of discrete structures. In: Bendsøe, M.P.; Mota Soares, C.A. (eds.)Topology optimization of structures, pp. 517–534. Dordrecht: Kluwer
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cheng, G. Some aspects of truss topology optimization. Structural Optimization 10, 173–179 (1995). https://doi.org/10.1007/BF01742589
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01742589