Abstract
This essay analyzes the measurement of the power factor in the drive motor system of the frequency converter. Due to the fact that it is inconvenient to utilize the power analyzer to acquire the motor power factor directly. A method is proposed. We can collect the DC bus signal waveform. Then we the could reconstruct motor stator three-phase voltage and current to test indirectly the motor power factor. In addition, there are some simulations and data collected from experimental device in order to verifying accuracy. Congruously, the experimental results show that within a certain error range, the motor power factor can be measured by voltage and current reconstruction.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Cheng, M., Jiang, Y., Wang, Q.: PWM inverter phase current reconstruction strategy for line voltage Modulation. J. Mot. Control 22(02), 9–16 (2018)
Chu, J., Hu, W., Huang, W., Yang, F.: A phase current sampling reconstruction technique for inverter. Trans China Electrotech. Soc. 25(01), 111–117 (2010)
Zhang, Y.: Application Technology of SPWM Frequency Conversion Speed Regulation. China Machine Press, p. 12 (2011)
Zeng, Y.: Principle, Algorithm and Application of SVPWM Technology of Variable Frequency Speed Regulation. China Machine Press, p. 10 (2010)
Gu, Y., Ni, F., Yang, D., Dang, J., Liu, H.: Phase current reconstruction method based on bus current sensor. J. Mot. Control 13(06), 811–816 (2009)
Zhang, J., Zhang, X., Chen, T., Peng, Y., Sun, Y., Tian, H.: Phase voltage reconstruction of synchronous motor and observation of magnetic chain. Electr. Driv. 43(08), 29–32 (2013)
Sun, X., Shang, Y., Zhong, Y., Zhang, W.: Research on output voltage reconstruction technology of three-phase voltage source inverter. J. Xi’an Univers. Technol. 02, 122–124 (2005)
Haga, H., Hara, Y., Kondo, S.: Method for Reconstructing Three-phase Voltage of Current Source Inverter via Detection of DC-link Voltage. Nagaoka University of Technology (2012)
Wang, W.: Research on High Precision Reactive Power Measurement. Southwest JiaoTong University (2007)
Fiorucci, E.: The measurement of actual apparent power and actual reactive power from the instantaneous power signals in single-phase and three-phase systems. Electr. Power Syst. Res. (2014)
Shi, Y.: Calculation and Analysis of Reactive Power Under Power Electronic Load. SCUT(South China University of Technology) (2011)
Sarıbulut, L.: A simple power factor calculation for electrical power systems. Electr. Power Energy Syst. 06 (2011)
Li, Y.: Research on Phase Current Reconstruction Technology of Permanent Magnet Synchronous Motor. Harbin Institute of Technology (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, Y., Huang, Z., Luo, X., Huang, Y. (2020). Power Analysis Method Based on DC Bus Voltage Waveform. In: Liang, Q., Liu, X., Na, Z., Wang, W., Mu, J., Zhang, B. (eds) Communications, Signal Processing, and Systems. CSPS 2018. Lecture Notes in Electrical Engineering, vol 517. Springer, Singapore. https://doi.org/10.1007/978-981-13-6508-9_83
Download citation
DOI: https://doi.org/10.1007/978-981-13-6508-9_83
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6507-2
Online ISBN: 978-981-13-6508-9
eBook Packages: EngineeringEngineering (R0)