Abstract
The temperature, humidity, air composition and pH value are very important parameters in the granary that keep the grain safely store and good quality. Nowadays only temperature and moisture are used in most granary monitor and control system. Air composition, pH and insect pest are not monitored because classic industrial personal computer or microcomputer are not able to handle these real-time multiply tasks at the same time. So it is necessary to design a monitor and alarm system to monitor these parameters in the granary to minimize or curtail damage or loss. Applying the advanced embedded technology and sensor technology, a set of granary temperature and humidity monitor and alarm system is designed based on the ARM. Temperature sensor, humidity sensor, air composition sensor and pH value sensor are selected to monitor the parameters in the granary. Based on the ARM microprocessor LPC2290, the hardware system consists of serial communication module, LCD display module and alarm module. Based on the embedded operation system, the software completes the allocation design and testing of the tasks and realizes the functions such as pulse frequency signal acquisition, analog signal A/D convert, serial digital signal communication, alarm in different grades and LCD display. All the parameters can be real-time displaying on the LCD screen. The system meets the requirement of the monitor and alarm functions in the granary.
Chapter PDF
Similar content being viewed by others
References
Liu, T.: The Design of Intelligent Granary Monitoring System Based on Wireless Sensor Network. Journal of Jinling Institute of Technology 26(4), 6–11 (2010)
Simulation of Temperature Measurement System forGrain Storage Based on ZigBee Technology, http://www.computer.org/portal/web/csdl/doi/10.1109
Zheng, S.: The Development and Application of the Granary Temperature Measure System. Wuhan Polytechnic University (2009)
Wang, Z., Wang, P., Li, C.: Wireless Oxygen Content Monitor Design in Metallurgy Gas Processing. Control & Automation 23(1), 109–110 (2007)
Cai, X.: Research and Design of Smart Online pH Detector and Recorder.D. Zhejiang Polytechnic University (2009)
Chi, T., Huang, D.: pH Detection’s Realizer and Control Based on Transcendental Knowledge of Neuron Model. Journal of Zhengzhou University (Science Edition) 40(3), 32–34 (2008)
Li, T., Zhao, W., Huang, Z.: The pH Detecting System Based on nRF9E5 Wireless Transmission. Instrument Technique and Sensor (4), 62–63 (2009)
Zhou, L.: RM Embedded System Tutorial. Tsinghua University Press, Beijing (2004)
Shen, L., Song, T., Ye, Z.: Development and Application of Embedded System. Electronics Industry Press, Beijing (2005)
Zhou, L.: Basis and Practice of ARM Microcontrollers. Beijing Aerospace University Press, Beijing (2004)
Zhou, L.: ARM Embedded System Experimental Materials. Beijing Aerospace University Press, Beijing (2005)
Jean, L.J.: Embeded Real-time Operating System μC/OS- II. Beijing Aerospace University Press, Beijing (2003)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 IFIP International Federation for Information Processing
About this paper
Cite this paper
Yang, L., Cheng, X., Jiang, Z., Ren, Z. (2012). Research on the Monitor and Control System of Granary Temperature and Humidity Based on ARM. In: Li, D., Chen, Y. (eds) Computer and Computing Technologies in Agriculture V. CCTA 2011. IFIP Advances in Information and Communication Technology, vol 370. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-27275-2_28
Download citation
DOI: https://doi.org/10.1007/978-3-642-27275-2_28
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-27274-5
Online ISBN: 978-3-642-27275-2
eBook Packages: Computer ScienceComputer Science (R0)