Abstract
Engineering conceptual design can be defined as that phase of the product development process during which the designer takes a specification for a product to be designed and generates many broad solutions for it. It is well recognized that few computational tools exist that are capable of supporting the designer work through the conceptual phase of design. This paper presents a prototype constraint-based computer-aided design (CAD) technology, developed as an add-in to Autodesk Inventor, which can be used to support designers working in the early stages of design. The prototype has, at its core, a constraint filtering system based on generalized arc-consistency processing and backtrack search. We present aspects of our current prototype, focusing in particular on those aspects related to the interactive specification, development and configuration of the designer’s concepts from an initial high-level specification.
This research is funded by Enterprise Ireland, through their Research Innovation Fund (Grant Number RIF-2001-317). The software used for the project, Autodesk Inventor, has been sponsored by cadcoevolution.com, an Irish CAD tool provider.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Anthony, L., Regli, W.C., John, J.E., Lombeyda, S.V.: CUP: A computer-aided conceptual design environment for assembly modeling. Technical Report DU-MCS-01005, Department of Mathematics and Computer Science, Drexel University (June 2001)
Bahler, D., Dupont, C., Bowen, J.: An axiomatic approach that supports negotiated resolution of design conflicts in Concurrent Engineering. In: Artificial Intelligence in Design, pp. 363–379 (1994)
Bessiere, C., Regin, J.-C.: Arc consistency for general constraint networks: preliminary results. In: Proceedings IJCAI 1997, pp. 398–404 (1997)
Birmingham, W.P., Ward, A.: What is Concurrent Engineering? AIEDAM 9, 67–68 (1995); Guest Editorial in a Special Issue on Concurrent Engineering
Bowen, J., Bahler, D.: Frames, quantification, perspectives and negotiation in constraint networks in life-cycle engineering. Artificial Intelligence in Engineering 7, 199–226 (1992)
Buur, J.: A Theoretical Approach to Mechatronics Design. PhD thesis, TU Denmark (1990)
French, M.J.: Engineering Design: The Conceptual Stage. Heinemann, London (1971)
Gross, M.D., Ervin, S.M., Anderson, J.A., Fleisher, A.: Constraints: Knowledge representation in design. Design Studies 9(3), 133–143 (1988)
Haroud, D., Boulanger, S., Gelle, E., Smith, I.: Management of conflict for preliminary engineering design tasks. AIEDAM Journal 9, 313–323 (1995)
Hsu, W., Liu, B.: Conceptual design: Issues and challenges. CAD 32(14), 849–850 (2000)
Lottaz, C., Smith, I.F.C., Robert-Nicoud, Y., Faltings, B.V.: Constraint-based support for negotiation in collaborative design. Artificial Intelligence in Engineering 14, 261–280 (2000)
Lottaz, C., Stalker, R., Smith, I.: Constraint solving and preference activation for interactive design. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 12, 13–27 (1998)
Mittal, S., Falkenhainer, B.: Dynamic constraint satisfaction problems. In: AAAI 1990, pp. 25–32 (1990)
O’Sullivan, B.: Constraint-Aided Conceptual Design. PhD thesis, Department of Computer Science, University College Cork, Ireland (July 1999) (Also Professional Engineering Publishing, 2001)
O’Sullivan, B.: Interactive Constraint-Aided Conceptual Design. AIEDAM 16(4), 303–328 (2002)
Pahl, G., Beitz, W.: Engineering Design: A systematic approach. Springer, Heidelberg (1995)
Petrie, C., Jeon, H., Cutkosky, M.R.: Combining constraint propagation and backtracking for distributed engineering. In: Workshop on Non-Standard Constraint Processing, ECAI 1996, pp. 84–94 (1996)
Reddy, S.Y., Fertig, K.W., Smith, D.E.: Constraint management methodology for conceptual design tradeoff studies. In: Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California (August 1996)
Sabin, D., Weigel, R.: Product configuration frameworks – a survey. IEEE Intelligent Systems and their applications 13(4), 42–49 (1998)
Serrano, D.: Constraint Management in Conceptual Design. PhD thesis, MIT (1987)
Shimizu, S., Numao, M.: Constraint-based design for 3D shapes. Artificial Intelligence Journal 91, 51–69 (1997)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2004 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Holland, A., O’Callaghan, B., O’Sullivan, B. (2004). Supporting Constraint-Aided Conceptual Design from First Principles in Autodesk Inventor. In: Orchard, B., Yang, C., Ali, M. (eds) Innovations in Applied Artificial Intelligence. IEA/AIE 2004. Lecture Notes in Computer Science(), vol 3029. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-24677-0_93
Download citation
DOI: https://doi.org/10.1007/978-3-540-24677-0_93
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-22007-7
Online ISBN: 978-3-540-24677-0
eBook Packages: Springer Book Archive