Abstract
This paper presents a new method for positional accuracy quality control of spatial data. This method is valid for 1D, 2D, 3D and nD dimensional data, where data can follow any kind of distribution function. Normality of errors, or any other assumption are not required. The method is an exact statistical hypothesis testing based on multinomial distribution. The proportions of the multinomial distribution are defined by means of several metric tolerances. The proposed statistical test is exact, so the p-value can be derived by exploring a space of solutions and summing up the probabilities of each isolated case of this space. The performance of the test has been analyzed by means of a simulation procedure. The validity and the power of the contrast seem to be good enough. An application example is presented for the 3D case of working with two tolerances. In all cases, H0 is the same, but in the first one, its hypothesis is true, in the second, the true distribution has larger errors than assumed by H0 (it is worse) and, in the third case, the true distribution implies smaller errors than that stated by H0 (it is better in the sense of the error magnitude). In all three cases, the behavior of the proposed method is acceptable.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abdullah QA (2008) Mapping matters: the layman’s perspective on technical theory and practical applications of mapping and GIS. Photogramm Eng Remote Sens 74(5):683–685
Acharya B, Bell W (1992) Designing an optimal and scientific GIS project. ISPRS archives—volume XXIX Part B3. XVIIth ISPRS Congress. Technical Commission III: Mathematical analysis of data. August 2–14, 1992, Washington, D.C., USA. pp 627–632
AENOR (2016) UNE 148002:2016 Metodología de evaluación de la exactitud posicional de la información geográfica. Asociación Española de Normalización, Madrid
Ariza-López FJ, Atkinson-Gordo AD (2008) Analysis of some positional accuracy assessment methodologies. Surv Eng 134(2):45–54
Ariza-López FJ, Rodríguez-Avi J (2014) A statistical model inspired by the national map accuracy standard. Photogramm Eng Remote Sens 80(3):271–281
Ariza-López FJ, Rodríguez-Avi J (2015a) A method of positional quality control testing for 2D and 3D line strings. Trans GIS 19(3):480–492
Ariza-López FJ, Rodríguez-Avi J (2015b) Informe sobre la aplicación de la propuesta de norma UNE 148002 sobre un conjunto de datos real. Universidad de Jaén, Informe para el Comité Técnico 148 de AENOR
ASPRS (2015) ASPRS positional accuracy standards for digital geospatial data. Photogramm Eng Remote Sens 81(4):53–63
Cheok G, Filliben J, Lytle AM (2008) NISTIR 7638. Guidelines for accepting 2D building plans. National Institute of Standards and Technology, Gaithersburg, Maryland
Dempsey C (2013) Where is the Phrase “80% of Data is Geographic” From? https://www.gislounge.com/80-percent-data-is-geographic/. Accessed 4 Nov 2016
FGDC (1998) FGDC-STD-007: geospatial positioning accuracy standards, Part 3. National standard for spatial data accuracy. Federal Geographic Data Committee, Reston, VA
Fisher RA (1922) On the interpretation of χ2 from contingency tables, and the calculation of P. J Roy Stat Soc 85(1):87–94
Fisher RA (1935) The design of experiments. Oliver & Boyd, Edinburgh, Scot
Freeman GH, Halton JH (1951) Note on an exact test treatment of contingency, goodness of fit and other problems of significance. Biometrika 38(1/2):141–149
ISO (1985) ISO 2859-2:1985. Sampling procedures for inspection by attributes—Part 2: sampling plans indexed by limiting quality (LQ) for isolated lot inspection. Genebre, Switzerland
ISO (1999) ISO 2859-1:1999. Sampling procedures for inspection by attributes—Part 1: sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. Genebre, Switzerland
ISO (2013) ISO 19157:2013. Geographic information—data quality. Genebre, Switzerland
Liu X, Hu P, Hu H, Sherba J (2012) Approximation theory applied to DEM vertical accuracy assessment. Trans GIS 16(3):397–410
Maune DF (ed) (2007) Digital elevation model technologies and applications: the Dem user’s manual. American Society for Photogrammetry and Remote Sensing, Bethesda, MD
Mehta CR, Patel NR (1983) A network algorithm for performing Fisher’s exact test in r × c contingency tables. J Am Stat Assoc 78(382):427–434
Müller MJ (2001) Exact tests for small sample 3 × 3 contingency tables with embedded fourfold tables: rationale and application. German J Psychiatry 4(1):57–62
R Core Team (2012) R: a language and environment for statistical computing. R Foundation for statistical computing, Vienna, Austria. ISBN 3-900051-07-0; http://www.R-project.org/
Storer BE, Choongrak K (1990) Exact properties of some exact test statistics for comparing two binomial proportions. J Am Stat Assoc 85(409):146–155
USBB (1947) United States National Map Accuracy Standards. US Bureau of the Budget, Washington DC
Zandbergen PA (2008) Positional accuracy of spatial data: non-normal distributions and a critique of the national standard for spatial data accuracy. Trans GIS 12(1):103–130
Zandbergen PA (2011) Characterizing the error distribution of lidar elevation data for North Carolina. Int J Remote Sens 32(2):409–430
Acknowledgements
Research in this paper has been partially funded by grant CTM2015-68276-R of the Spanish Ministry on Science and Innovation (European Regional Development Funds).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Ariza-López, F.J., Rodríguez-Avi, J., Alba-Fernández, V. (2018). A Positional Quality Control Test Based on Proportions. In: Mansourian, A., Pilesjö, P., Harrie, L., van Lammeren, R. (eds) Geospatial Technologies for All. AGILE 2018. Lecture Notes in Geoinformation and Cartography. Springer, Cham. https://doi.org/10.1007/978-3-319-78208-9_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-78208-9_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-78207-2
Online ISBN: 978-3-319-78208-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)