Abstract
The paper presents a device for calibrating microforce sensors. The principle of operation of the calibrator is based on the reversed principle of operation of the current balance – the ampere standard. The design of the device is described in detail. During the implementation of the project, minor corrections were made in project, what has been described. The final stage was to perform the calibration of the device with an analytical balance. Additionally, the experimental microforce sensor tests confirmed the correctness of the device operation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Üneri, A., Balicki, M.A., Handa, J., Gehlbach, P., Taylor, R.H., Iordachita, I.: New steady-hand eye robot with micro-force sensing for vitreoretinal surgery. Proc IEEE/RAS-EMBS Int Conf Biomed Robot Biomechatron. 2010(26–29), 814–819 (2010). https://doi.org/10.1109/biorob.2010.5625991
Xie, Y., Zhou, Y., Lin, Y., Wang, L., Xi, W.: Development of a microforce sensor and its array platform for robotic cell microinjection force measurement. Sensors 16(4), 483 (2016). https://doi.org/10.3390/s16040483
Wang, W., Zhao, Y., Qin, Y.: A novel integrated multifunction micro-sensor for three-dimensional micro-force measurements. Sensors 12(4), 4051–4064 (2012). https://doi.org/10.3390/s120404051
Liu, H., Yang, S., Zhao, Y., Jiang, Z., Liu, Y., Tian, B.: A micro-force sensor with slotted-quad-beam structure for measuring the friction in mems bearings. Sensors 13(10), 13178–13191 (2013). https://doi.org/10.3390/s131013178
Trainer, M.: The patents of William Thomson (Lord Kelvin). World Patent Inf. 26(4), 311–317 (2004). https://doi.org/10.1016/j.wpi.2004.05.003
Chwaleba, A., Poniński, M., Siedlecki, A.T.: Metrologia Elektryczna, 8th edn. WNT, Warszawa (2003)
Nowicki, M., Kachniarz, M., Jus, A., Charubin, T., Radzikowska-Jus, W.: Magnetic amorphous micro-force sensor. Acta Phys. Pol., A 131(4), 1180–1182 (2017). https://doi.org/10.12693/APhysPolA.131.1180
Acknowledgements
This work was partially supported by the statutory founds of Institute of Metrology and Biomedical Engineering, Warsaw University of Technology (Poland).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Gazda, P., Gromelski, W., Nowicki, M., Kachniarz, M. (2018). Design and Construction of Microforce Sensor Calibrator. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2018. AUTOMATION 2018. Advances in Intelligent Systems and Computing, vol 743. Springer, Cham. https://doi.org/10.1007/978-3-319-77179-3_72
Download citation
DOI: https://doi.org/10.1007/978-3-319-77179-3_72
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-77178-6
Online ISBN: 978-3-319-77179-3
eBook Packages: EngineeringEngineering (R0)