Abstract
In the algorithm of instantaneous reactive power theory (IP-IQ), the rotation angle of the synchronous rotating coordinate system is an important parameter that has to be supervised in real time. In this paper, we propose an improved software phase-lock-loop (SPLL) that accurately lock of the rotation angle of the fundamental positive sequence component in the unbalance grid voltage by establishing a virtual symmetrical three-phase system and then calculate the compensation current components. In this paper, we introduce a new structure of the traditional Distribution Static Synchronous Compensator (DSTATCOM) main circuit, which considered as a combination of the conventional DSTATCOM topology with a capacitor C\(_f\) in series and the surfacing inductance. However, unlike the traditional DSTATCOM DC-Link that requires a fairly high DC voltage along with the high switching losses, the series capacitor reduces DC-Link voltage significantly, in the meanwhile compensates the reactive power required by the load without compromising DSTATCOM performance. Finally, a simulation study has been carried out by the author using Simulink to verify the proposed topology.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Sahoo, A.K., Thyagarajan, T.: Modeling of facts and custom power devices in distribution network to improve power quality. In: International Conference on Power Systems, pp. 1–7 (2010)
Kazmierkowski, M.P., Jasinski, M., Wrona, G.: DSP-based control of grid-connected power converters operating under grid distortions. IEEE Trans. Industr. Inf. 7(2), 204–211 (2011)
Wan, L., Yuan, J., Chen, B.: The method to improve power quality of distribution system by distribution static compensator. Power Syst. Technol. 28(19), 81–84 (2004)
Ewald, F.: Power Quality in Power Systems and Electrical Machines. Academic Press/Elsevier, Boston (2008)
Ghosh, A., Ledwich, G.: Load compensating dstatcom in weak ac systems. IEEE Trans. Power Deliv. 18(4), 1302–1309 (2003)
Singh, B., Solanki, J.: Load compensation for diesel generator based isolated generation system employing dstatcom. In: International Conference on Power Electronics, Drives and Energy Systems, pp. 1–6 (2006)
Reed, G.F., Greaf, J.E., Matsumoto, T., Yonehata, Y.: Application of a 5 MVA, 4.16 kV D-STATCOM system for voltage flicker compensation at seattle iron and metals. In: Power Engineering Society Summer Meeting, vol. 3, pp. 1605–1611 (2000)
Lam, C.S., Choi, W.H., Wong, M.C., Han, Y.D.: Adaptive DC-link voltage-controlled hybrid active power filters for reactive power compensation. IEEE Trans. Power Electron. 27(4), 1758–1772 (2012)
Sepulveda, C.A., Munoz, J.A., Espinoza, J.R., Figueroa, M.E.: All-on-chip dq-frame based D-STATCOM control implementation in a low-cost FPGA. IEEE Trans. Industr. Electron. 60(2), 659–669 (2013)
Xie, Y.X.: Improved detecting method for harmonic and fundamental active and reactive currents. J. S. China Univ. Technol. 33(4), 16–19 (2005)
Pan, W., Chen, H., Zhang, J.: Novel method for detecting synchronous phases and instanteous symmetrical components. High Volt. Eng. 35(9), 2150–2155 (2009)
Shigan, F., Qian, A., Weihua, X.: Harmonic modeling of electric loads based on instantaneous sysmmetrical components. High Volt. Eng. 34(4), 783–787 (2008)
Zaveri, T., Bhalja, B.R., Zaveri, N.: Load compensation using DSTATCOM in three-phase, three-wire distribution system under various source voltage and delta connected load conditions. Int. J. Electr. Power Energy Syst. 41(1), 34–43 (2012)
Singh, B., Solanki, J.: A comparative study of control algorithms for dstatcom for load compensation. In: IEEE International Conference on Industrial Technology, pp. 1492–1497 (2007)
Chen, B.S., Hsu, Y.Y.: A minimal harmonic controller for a STATCOM. IEEE Trans. Industr. Electron. 55(2), 655–664 (2008)
Xiaodong, H., Qi, P., Qizhi, Z.: Detection technology of voltage sag based on SPLL. J. Xian Tech. Univ. 31(1), 69–73 (2011)
George, V.: Dstatcom topologies for three-phase high power applications. Int. J. Power Electron. 2(2), 107–124 (2010)
Karanki, S.B., Geddada, N., Mishra, M.K., Kumar, B.K.: A DSTATCOM topology with reduced DC-link voltage rating for load compensation with nonstiff source. IEEE Trans. Power Electron. 27(3), 1201–1211 (2012)
Zeng, L.: Supply and distribution technology. People’s Posts and Telecommunications (2013)
Acknowledgement
This work is supported by National Program on Key Basic Research Project under grant 2013CB035906 and The Fundamental Research Funds for the Central Universities under Grant DUT16QY13.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Wang, X., Zhu, X., Lai, X., Lin, C., Li, S. (2018). Application of Improved Software Phase-Locked-Loop in DSTATCOM. In: Barolli, L., Enokido, T. (eds) Innovative Mobile and Internet Services in Ubiquitous Computing . IMIS 2017. Advances in Intelligent Systems and Computing, vol 612. Springer, Cham. https://doi.org/10.1007/978-3-319-61542-4_33
Download citation
DOI: https://doi.org/10.1007/978-3-319-61542-4_33
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-61541-7
Online ISBN: 978-3-319-61542-4
eBook Packages: EngineeringEngineering (R0)