Abstract
The article presents the measurement and control system of plasmatron plasma reactor for utilization and recovery of metals from waste of printed circuit boards built in the Industrial Research Institute for Automation and Measurements in Poland. The plasma reactor is the key component of a test stand developed to conduct research on processing and recovery of metals from used electric and electronic equipment, especially from electronic printed circuit boards. The system allows, recording multiparametric measurements realized in real time and time-correlated, visualization of current values of measurements and states by means of SCADA software. Besides main functions of data acquisition and visualization, the system allows local and remote control of operation of reactor subsystems. Analysis of measurement chain is presented for the key parameter of reactor work, which is temperature measurement inside the reactor. Standard uncertainty of measurement of the temperature is evaluated and in this case equal to 5 °C.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Huisman, J.: 2008 Review of Directive 2002/96 on WEEE, Final Report, United Nations University (2007)
Cobbing, M.: Toxic Tech: Not In Our Backyard (2008), Greenpeace.org
Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE) (2003), http://ec.europa.eu/environment/waste/weee/index_en.htm , http://www.mg.gov.pl/English/ECONOMY/Industrial+Policy/ROHS+Directive , http://www.zipsee.pl/aktualnosci/112/zmiana-dyrektywy-weee.html
Szałatkiewicz, J., Szewczyk, R., Budny, E., Missala, T., Winiarski, W.: Construction aspects of plasma based technology for waste of electrical and electronic equipment (WEEE) management in urban areas. Procedia Engineering 57, 1100–1108 (2013)
Szałatkiewicz, J.: Energy recovery from waste of printed circuit boards in plasmatron plasma reactor. Polish Journal of Environmental Studies 23(1) (2014)
Fotowicz, P.: Obliczanie niepewności rozszerzonej metodą analityczną opartą na splocie rozkładów wielkości wejściowych. Pomiary Automatyka Robotyka 1, 5 (2005) (in Polish)
Joint Committee for Guides in Metrology, Evaluation of measurement data — Guide to the expression of uncertainty in measurement. JCGM 100 (2008)
Arendarski, J.: Niepewność pomiarów, Oficyna Wydawnicza Politechniki Warszawskiej (2006) (in Polish)
Dorozhovets, M., Propozycje, Z.L.: Propozycje rozszerzenia metod wyznaczania niepewności wyniku pomiarów wg Przewodnika GUM (1) Uwzględnianie wpływu autokorelacji i nieadekwatności rozkładu wyników obserwacji w niepewności typu A. Pomiary Automatyka Robotyka 11(1), 6–15 (2007) (in Polish)
Dorozhovets, M., Propozycje, Z.L.: rozszerzenia metod wyznaczania niepewności wyniku pomiarów wg Przewodnika GUM (2) Uściślenie metod obliczeń niepewności typu B. Pomiary Automatyka Robotyka 11(2), 45–52 (2007) (in Polish)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Szałatkiewicz, J., Szewczyk, R., Budny, E., Missala, T., Winiarski, W. (2014). Measurement and Control System of the Plasmatron Plasma Reactor for Recovery of Metals from Printed Circuit Board Waste. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Recent Advances in Automation, Robotics and Measuring Techniques. Advances in Intelligent Systems and Computing, vol 267. Springer, Cham. https://doi.org/10.1007/978-3-319-05353-0_65
Download citation
DOI: https://doi.org/10.1007/978-3-319-05353-0_65
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-05352-3
Online ISBN: 978-3-319-05353-0
eBook Packages: EngineeringEngineering (R0)