Camera Set Up for XR Headset¶

What Do You Need?¶

• An Ultraleap Hand Tracking Camera.

• The latest version of our Hand Tracking Software.

Download and install the Hand Tracking Software, and follow the steps below to get started right away.

Set Up Hand Tracking For Your Headset¶

1. Mount your camera module and connect it via USB

2. Use the USB cable included in the box.

For Leap Motion Controller 2¶

If you have a Leap Motion Controller 2, you can use the XR Headset Mount for the Leap Motion Controller 2 to attach it to your headset.

There are optimal placement locations depending on which headset you have. We have produced guides for each headset to make mounting easy:

Pico 4

Follow these instructions to attach your Leap Motion Controller 2 to your Pico 4.

HTC Vive Focus 3

Follow these instructions to attach your Leap Motion Controller 2 to your HTC Vive Focus 3.

Pico Neo 3

Follow these instructions to attach your Leap Motion Controller 2 to your Pico Neo 3.

For Leap Motion Controller¶

If you have a Leap Motion Controller you can use a VR Developer Mount to attach the camera module to your headset.

Peel off the sticker, then use the free cable extender bundled with the mount to connect the controller directly to the computer.

For Stereo IR 170¶

If you have an Ultraleap Stereo IR 170 and access to a 3D printer, we recommend downloading and printing the free Stereo IR 170 Mount (CAD files).

If using the 3D printed mount, attach to the centre of the headset and insert the Stereo IR 170. Otherwise, we recommend using a small strip of velcro in the same position.

The Stereo IR 170 operates with a typical horizontal and vertical field of view of 170° x 170° and a depth of reliable tracking of 10cm to 75cm.

Remove both lens caps from the Stereo IR 170

Back to top