default search action
International Journal of Computer Integrated Manufacturing, Volume 20
Volume 20, Number 1, 2007
- Qian Wang, Geraint Wyn Owen, Antony Roy Mileham:
Determining numbers of workstations and operators for a linear walking-worker assembly line. 1-10 - M. Mahesh, Soh-Khim Ong
, Andrew Y. C. Nee:
A web-based multi-agent system for distributed digital manufacturing. 11-27 - Josko Valentincic
A novel approach to DFM in toolmaking: a case study. 28-38 - X. F. Yin, Li Pheng Khoo:
Multiple population search strategy for routing selection and sequence optimization of a supply chain. 39-56 - Kosmas Alexopoulos
Multi-criteria upper-body human motion adaptation. 57-70 - Qingjin Peng, C. Chung, Chunsheng Yu, T. Luan:
A networked virtual manufacturing system for SMEs. 71-79 - Weidong Li, Chris A. McMahon:
A simulated annealing-based optimization approach for integrated process planning and scheduling. 80-95 - Guy A. Bingham
Rapid manufactured textiles. 96-105
Volume 20, Number 2&3, 2007
- Y. S. Fan, George Q. Huang:
Networked Manufacturing and Mass Customization in the ECommerce Era: the Chinese Perspective. 107-114 - Q. X. Chen, X. Chen, Wing Bun Lee
Qualitative search algorithms for partner selection and task allocation in the formulation of virtual enterprise. 115-126 - Pingyu Jiang, Guanghui Zhou, Gang Zhao, Yingfeng Zhang, Huibin Sun:
e2-MES: an e-service-driven networked manufacturing platform for extended enterprises. 127-142 - Y. G. Kang, Z. Wang, R. Li, C. Jiang:
A fixture design system for networked manufacturing. 143-159 - Yu Zhao, Yushun Fan:
Implementation approach of ERP with mass customization. 160-168 - Shengyou Shi, Rong Mo, Haicheng Yang, Zhiyong Chang, Zefeng Chen:
An implementation of modelling resource in a manufacturing grid for resource sharing. 169-177 - Q. H. Yang, G. N. Qi, Y. J. Lu, X. J. Gu:
Applying mass customization to the production of industrial steam turbines. 178-188 - X. Wen, X. Xu, G. Wang, Y. Gong, R. Lv:
An extended GRAI model for enterprise process diagnosis. 189-198 - Bing-Hai Zhou, Lifeng Xi, L.-Y. Tao:
A framework of order evaluation and negotiation for SMMEs in networked manufacturing environments. 199-210 - Hong Song, Haibo Shi
The networked manufacture application service platform for the equipment manufacturing industry base in north-east China. 211-221 - Derong Shen, Ge Yu, Yue Kou, Tiezheng Nie, Zhibin Zhao:
Resolving heterogeneity of Web-service composition in network manufacturing based on ontology. 222-233 - Haibin Yu, Yanfeng Li, Qianjin Guo, Aidong Xu:
Development and application of internet-based remote monitoring and diagnostic platform for key equipment. 234-243 - Zuo-Liang Ye, Guoning Qi, Xinjian Gu, Zhi-Gang Bao, Yadong Qian:
A cooperative process-management system based on the manufacturing grid. 244-253 - Xiaodong Zhang, Yu Yang, Sheng Liu, Fei Liu:
Realization of a development platform for Web-based product customization systems. 254-264 - Ling Tian, Jizhong Chen, Qiaoyu Wang, Wentao Hao, Bing-shu Tong:
CoDesign Space: a collaborative design support system in a network environment. 265-279 - M. Ni, X. Xu, S. Deng:
Extended QFD and data-mining-based methods for supplier selection in mass customization. 280-291 - George Q. Huang, Li Li, T. L. Lau, Xin Chen:
A generic and extensible information infrastructure framework for mass-customizing platform products. 292-306
Volume 20, Number 4, 2007
- Aysin Rahimifard, Richard H. Weston:
The enhanced use of enterprise and simulation modellingtechniques to support factory changeability. 307-328 - N. Giannelos, Nikolaos Papakostas
Dispatching policy for manufacturing jobs and time-delay plots. 329-337 - D. K. Pal, B. Ravi, L. S. Bhargava:
Rapid tooling route selection for metal casting using QFD-ANP methodology. 338-354 - A. I. Shabaka, Hoda A. ElMaraghy:
Generation of machine configurations based on product features. 355-369 - Jing-Wen Li:
Modelling a quality assurance information system for product development projects with the UML approach. 370-386 - S. Sriram, Sun-Woh Lye:
Layer decomposition and constitution modelling for rapid prototyping. 387-395 - Bishnu Prasad Das, Anne-Françoise Cutting-Decelle
Towards the understanding of the requirements of a communication language to support process interoperation in cross-disciplinary supply chains. 396-410
Volume 20, Number 5, 2007
- Sev V. Nagalingam
Editorial. 411-412 - Mehdi Shahbazpour, Rainer Seidel:
Strategic manufacturing system and process innovation through elimination of trade-offs. 413-422 - Charles V. Trappey
Developing silicon intellectual property E-trade mechanisms for system on chip design and integration. 423-435 - J. Cao, Yoke San Wong, Kim Seng Lee:
Application of statistical process control in injection mould manufacturing. 436-451 - Massimiliano Barletta
Surface preparation and coating of metal coils by using a fully integrated manufacturing system. 452-464 - Yandra, Hiroyuki Tamura:
A new multiobjective genetic algorithm with heterogeneous population for solving flowshop scheduling problems. 465-477 - B. Boswell, T. T. Chandratilleke:
The introduction of an environmental cooling method is proved by using a reduced tool life cycle time method. 478-485 - Hirohisa Sakai, Kakuro Amasaka:
Development of a robot control method for curved seal extrusion for high productivity in an advanced Toyota production system. 486-496 - Massimiliano Barletta
Metal foams for structural applications: design and manufacturing. 497-504
Volume 20, Number 6, 2007
- Richard H. Weston, Alejandro Guerrero, Kamran Ali Chatha:
Process classes deployed in manufacturing enterprises. 505-523 - Kai-Ling Mak, P. Peng, X. X. Wang, T. L. Lau:
An ant colony optimization algorithm for scheduling virtual cellular manufacturing systems. 524-537 - Kosmas Alexopoulos
Quantifying the flexibility of a manufacturing system by applying the transfer function. 538-547 - Yadong Liu, Wei Li, Kazuo Yamazaki, Makoto Fujishima:
Model-driven design and implementation of discrete event control for a machine tool control system. 548-556 - H. C. Hwang, B. K. Choi:
Workflow-based dynamic scheduling of job shop operations. 557-566 - Tien-Lung Sun:
Structured metadata for representation, query and retrieval of behaviour models of virtual products. 567-578 - Arianna Alfieri:
Due date quoting and scheduling interaction in production lines. 579-587 - Mariagrazia Dotoli
Fuzzy multi-objective optimization for network design of integrated e-supply chains. 588-601 - T. Staikos, Shahin Rahimifard:
An end-of-life decision support tool for product recovery considerations in the footwear industry. 602-615
Volume 20, Number 7, 2007
- A. Bernard, Xavier Boucher, Sándor Vajna
Guest Editorial. 617-618 - Michel Bigand, Jean Pierre Bourey, Nicolas Perry
Case studies in model integration. 619-626 - Kurt Sandkuhl
Ontology-based artefact management in automotive electronics. 627-638 - Élise Vareilles, Michel Aldanondo
Evaluation and design: a knowledge-based approach. 639-653 - Guillaume Pol, Christophe Merlo
Analysing collaborative practices in design to support project managers. 654-668 - Aydin Nassehi
A new software platform to support feature-based process planning for interoperable STEP-NC manufacture. 669-683 - Hong-Bae Jun, Jong-Ho Shin, Dimitris Kiritsis, Paul C. Xirouchakis:
System architecture for closed-loop PLM. 684-698 - Raymond Houé
Structuring and modelling norms for the recyclability assessment of products during their design. 699-714 - Kary Främling, Mark Harrison, James Brusey
Requirements on unique identifiers for managing product lifecycle information: comparison of alternative approaches. 715-726
Volume 20, Number 8, 2007
- Hervé Panetto
Towards a classification framework for interoperability of enterprise applications. 727-740 - Sheng Quan Xie
Nesting of two-dimensional irregular parts: an integrated approach. 741-756 - Pablo Gil
Flexible multi-sensorial system for automatic disassembly using cooperative robots. 757-772 - Julie Ann Stuart Williams:
A review of research towards computer integrated demanufacturing for materials recovery. 773-780 - W. K. Chiu, K. M. Yu, K. H. Man:
Chip form modelling and chip-forming animation in oblique cutting. 781-793 - Dejan Gradisar, Gasper Music:
Production-process modelling based on production-management data: a Petri-net approach. 794-810 - Kamel Rouibah
Combining workflow and PDM based on the workflow management coalition and STEP standards: the case of axalant. 811-827 - Ana González-Marcos
A neural network-based approach for optimising rubber extrusion lines. 828-837
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-19 20:46 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: