International Journal of Automation Technology, Volume 13

Volume 13, Number 1, January 2019

Special Issue on Advanced Cutting Science and Technologies

• 
  Takashi Matsumura:
  Editorial: Advanced Cutting Science and Technologies. 5
• 
  Tohru Ihara, Xiaoqi Song, Yukio Takahashi:
  Frictional Stress Derived on Interface Between Work and Tool Materials on Quasi-Dislocation Model for Cutting Simulations. 6-12
• 
  Xiaoqi Song, Yukio Takahashi, Tohru Ihara:
  Prediction of Built-Up Layer and Built-Up Edge Formation in Dry Cutting of SUS304 Stainless Steel. 13-21
• 
  Hiroyasu Iwabe, Mitunori Hiwatashi, Masahiko Jin, Hidenari Kanai:
  Side Milling of Helical End Mill Oscillated in Axial Direction with Ultrasonic Vibration. 22-31
• 
  Katsuhiko Sakai, Hiroo Shizuka, Kazumasa Iwakura:
  Tool Wear Reduction Effect of Oil-Immersion Treatment and its Surface Modification Mechanism. 32-40
• 
  Toshiyuki Obikawa, Zhenglong Fang, Wataru Matsumoto, Mamoru Hayashi, Hideaki Hattori, Chikara Morigo:
  Deposition of Trace Coolant Elements on Flank Face in Turning of mboxInconel 718 Under High Pressure Conditions. 41-48
• 
  Hideharu Kato, Noriyuki Takase, Kentaro Watanabe, Tatsuya Shikimura, Kazuyuki Kubota:
  Cutting Performance of Coated Cemented Carbide Tool in Driven Rotary Cutting of Hardened Steel. 49-57
• 
  Masato Okada, Reiji Suzuki, Hidehito Watanabe, Masaaki Otsu, Takuya Miura:
  Cutting Characteristics of Direct Milling of Cemented Tungsten Carbides Using Diamond-Coated Carbide End Mills with Untreated and Treated Cutting Edge. 58-66
• 
  Mayu Hashimoto, Keiichi Nakamoto:
  A Neural Network Based Process Planning System to Infer Tool Path Pattern for Complicated Surface Machining. 67-73
• 
  Mitsuo Uchiyama, Naoshi Sakata:
  Cutting Capability of Microdrills in Nonstep Drilling. 74-79
• 
  Shuntaro Yamato, Toshiki Okuma, Kenichi Nakanishi, Junji Tachibana, Norikazu Suzuki, Yasuhiro Kakinuma:
  Chatter Suppression in Parallel Turning Assisted with Tool Swing Motion Provided by Feed System. 80-91
• 
  Akinori Saito, Shinya Kato, Mitsuo Nagao:
  Supporting Method for Thin Parts Having Curved Surfaces - Improvement of End Milling Accuracy by Using Low-Melting Point Alloy and Elastomer Support -. 92-100
• 
  Fumihiro Uchiyama, Akihiko Tsuboi, Takashi Matsumura:
  Surface Profile Analysis in Milling with Structured Tool. 101-108
• 
  Shoichi Tamura, Takashi Matsumura:
  Fabrication of Hyper-Hemisphere of Cobalt-Chromium Alloys Using Curve Generator Machining. 109-117
• 
  Ichiro Yoshida, Yuki Kondo, Go Wakatsuki, Munetoshi Numada:
  Study of a Plateau Surface Evaluation Method Using a Fast M-Estimation Type Hough Transform. 118-123

Regular Papers

• 
  Amine Gouarir, Syuhei Kurokawa, Takao Sajima, Mitsuaki Murata:
  Influence of Coating in Square End Mill Using In-Process Tool Wear Detection Based on Electrical Contact Resistance. 125-132
• 
  Shinichi Yoshimitsu, Daiki Iwashita, Kenji Shimana, Yuya Kobaru, Shunichi Yamashita:
  Monitoring of Cutting State in End-Milling Based on Measurement of Tool Behavior Using CCD Image. 133-140
• 
  Daniela Maffiodo, Federico Colombo, Terenziano Raparelli:
  Numerical Model of Digital Valve-Controlled Active Air Bearing. 141-148
• 
  Károly Szipka, Andreas Archenti:
  Utilization of Multi-Axis Positioning Repeatability Performance in Kinematic Modelling. 149-156
• 
  Feng Gao:
  Generation of High-Pressure Air that Can Be Used as Auxiliary Power Source in a Press Die. 157-163

Volume 13, Number 2, March 2019

Special Issue on Precision Surface Finishing

• 
  Fang-Jung Shiou, Toshiyuki Enomoto:
  Editorial: Precision Surface Finishing. 173
• 
  Fang-Jung Shiou, Assefa Asmare Tsegaw:
  Ultra Precision Surface Finishing Processes. 174-184
• 
  Hideo Takino, Yoshimi Takeuchi:
  Machining of Smooth Optical Surfaces by Ultraprecision Milling with Compensated Feeding Mechanisms. 185-190
• 
  Keita Shimada, Takuya Hirai, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
  Unidirectional Wetting Surfaces Fabricated by Ultrasonic-Assisted Cutting. 191-198
• 
  Ming-Yi Tsai, Yue-Feng Lin, Jihng-Kuo Ho, Jing-Guang Yang:
  Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel. 199-206
• 
  Yuki Manabe, Hiroki Murakami, Toshiki Hirogaki, Eiichi Aoyama, Tatsuya Furuki:
  Mirror-Surface Finishing by Integrating Magnetic-Polishing Technology with a Compact Machine Tool. 207-220
• 
  Urara Satake, Toshiyuki Enomoto, Teppei Miyagawa, Takuya Ohsumi, Hidenori Nakagawa, Katsuhiro Funabashi:
  Stabilization of Removal Rate in Small Tool Polishing of Glass Lenses. 221-229
• 
  Akihisa Kubota:
  Surface Finishing of Single-Crystal SiC and GaN Wafers Using a Magnetic Tool in H₂O₂ Solution. 230-236
• 
  Ryunosuke Sato, Yoshio Ichida:
  Study on Polishing Characteristics of Pyramidal Structured Polishing Pad. 237-245
• 
  Takashi Hirano, Yuki Morioka, Shotaro Matsumura, Yasuhisa Sano, Taito Osaka, Satoshi Matsuyama, Makina Yabashi, Kazuto Yamauchi:
  Surface Finishing Method Using Plasma Chemical Vaporization Machining for Narrow Channel Walls of X-Ray Crystal Monochromators. 246-253
• 
  Michitaka Yamamoto, Takashi Matsumae, Yuichi Kurashima, Hideki Takagi, Tadatomo Suga, Toshihiro Itoh, Eiji Higurashi:
  Growth Behavior of Au Films on SiO₂ Film and Direct Transfer for Smoothing Au Surfaces. 254-260
• 
  Francesco Giuseppe Biondani, Giuliano Bissacco, Lukás Pilný, Hans Nørgaard Hansen:
  Analysis and Characterization of Machined Surfaces with Aesthetic Functionality. 261-269

Regular Papers

• 
  Qi An, Yuki Ishikawa, Wen Wen, Shu Ishiguro, Koji Ohata, Hiroshi Yamakawa, Yusuke Tamura, Atsushi Yamashita, Hajime Asama:
  Skill Abstraction of Physical Therapists in Hemiplegia Patient Rehabilitation Using a Walking Assist Robot. 271-278
• 
  Hiromu Kitahara, Jun'ichi Kaneko, Masahiro Ajisaka, Takeyuki Abe, Kenichiro Horio:
  Accurate Tool Path Generation Method for Large-Scale Discrete Shapes. 279-288
• 
  Yasutoshi Umehara, Nobuyuki Moronuki:
  Nondestructive Inline Inspection of Through-Silicon Vias Based on X-Ray Imaging and its Uncertainty Budget. 289-300
• 
  Tatsuki Ikari, Hidetake Tanaka:
  Development of Press Molding Preform Design and Fabrication Method with Unfolded Diagram for CFRP. 301-309
• 
  Monica Tiboni, Francesco Aggogeri, Nicola Pellegrini, Cesare Augusto Perani:
  Smart Modular Architecture for Supervision and Monitoring of a 4.0 Production Plant. 310-318

Volume 13, Number 3, May 2019

Special Issue on Additive Manufacturing with Metals

• 
  Tatsuaki Furumoto:
  Editorial: Additive Manufacturing with Metals. 329
• 
  Kyota Egashira, Tatsuaki Furumoto, Kiichi Hishida, Satoshi Abe, Tomohiro Koyano, Yohei Hashimoto, Akira Hosokawa:
  Formation Mechanism of Pores Inside Structure Fabricated by Metal-Based Additive Manufacturing. 330-337
• 
  Ryo Koike, Iori Unotoro, Yasuhiro Kakinuma, Yohei Oda:
  Graded Inconel 625 - SUS316L Joint Fabricated Using Directed Energy Deposition. 338-345
• 
  Johnnie Liew Zhong Li, Mohd Rizal Alkahari, Nor Ana Binti Rosli, Rafidah Hasan, Mohd Nizam Sudin, Faiz Redza Ramli:
  Review of Wire Arc Additive Manufacturing for 3D Metal Printing. 346-353
• 
  Koki Jimbo, Toshitake Tateno:
  Shape Contraction in Sintering of 3D Objects Fabricated via Metal Material Extrusion in Additive Manufacturing. 354-360
• 
  Hikaru Nishikawa, Yoshitaka Morimoto, Akio Hayashi:
  Development of Path Generation Method for Five-Axis 3D Printer. 361-371

Regular Papers

• 
  Isamu Nishida, Ryo Tsuyama, Keiichi Shirase, Masahiro Onishi, Katsuyuki Koarashi:
  Development of Innovative Intelligent Machine Tool Based on CAM-CNC Integration Concept - Adaptive Control Based on Predicted Cutting Force -. 373-381
• 
  Matthias Reuss, Taku Sakai, Atsushi Matsubara:
  Modeling Approach for Estimation of Contact and Friction Behavior of Rolling Elements in Linear Bearings. 382-388
• 
  Aya Ishigaki, Yuki Matsui:
  Effective Neighborhood Generation Method in Search Algorithm for Flexible Job Shop Scheduling Problem. 389-396
• 
  Ding-Chin Chou, Shang-Hui Yang, Jian-Shian Lin, Fuh-Shyang Juang, Yoshimi Takeuchi:
  Using Ultraprecision Machining to Fabricate LED Packaging Exhibiting High Luminous Intensity. 397-406
• 
  Titus Haas, Sascha Weikert, Konrad Wegener:
  MPCC-Based Set Point Optimisation for Machine Tools. 407-418
• 
  Kentaro Shinoda, Hiroaki Noda, Koichi Ohtomi, Takayuki Yamada, Jun Akedo:
  Promotion of Knowledge and Technology Transfer Towards Innovative Manufacturing Process: Case Study of New Hybrid Coating Process. 419-431
• 
  Mitsunari Oda, Takashi Torihara, Eiji Kondo, Noriyoshi Kumazawa:
  Feasibility Study of a Hybrid Spindle System with Ball and Active Magnetic Bearings for Quadrant Glitch Compensation During End Milling. 432-439

Volume 13, Number 4, July 2019

Special Issue on Augmented Prototyping and Fabrication for Advanced Product Design and Manufacturing

• 
  Satoshi Kanai, Jouke C. Verlinden:
  Editorial: Augmented Prototyping and Fabrication for Advanced Product Design and Manufacturing. 451-452
• 
  Daniel Shor, Bryan Zaaijer, Laura Ahsmann, Max Weetzel, Simon Immerzeel, Daniel Eikelenboom, Jess Hartcher-O'Brien, Doris Aschenbrenner:
  Designing Haptics: Improving a Virtual Reality Glove with Respect to Realism, Performance, and Comfort. 453-463
• 
  Shinichi Sumiyoshi, Yuichi Yoshida:
  Estimating 3D Position of Strongly Occluded Object with Semi-Real Time by Using Auxiliary 3D Points in Occluded Space. 464-474
• 
  Takayuki Nakamura, Jun'ichi Kaneko, Takeyuki Abe, Kenichiro Horio:
  Developing a Support System for Loading Planning. 475-481
• 
  Fumiki Tanaka, Makoto Tsuchida, Masahiko Onosato:
  Associating 2D Sketch Information with 3D CAD Models for VR/AR Viewing During Bridge Maintenance Process. 482-489
• 
  Shunsuke Komizunai, Shinji Ninomiya, Atsushi Konno, Satoshi Kanai, Tadayoshi Asaka, Eri Murata, Hiroki Mani, Nozomi Takahashi, Noriyo Colley:
  An Interactive Endotracheal Suctioning Simulator Which Exhibits Vital Reactions: ESTE-SIM. 490-498
• 
  Atsushi Mitani, Masumi Muramatsu:
  Development of Human Tongue Model for Mealtime Assistant Training Using Oral Care Simulation Model. 499-505
• 
  Tsubasa Maruyama, Mitsunori Tada, Haruki Toda:
  Riding Motion Capture System Using Inertial Measurement Units with Contact Constraints. 506-516
• 
  Masato Inoue, Wataru Suzuki:
  Universal Design Considering Physical Characteristics of Diverse Users. 517-525

Regular Papers

• 
  Yoshiaki Ishino, Hiroshi Tachiya, Yoshiyuki Kaneko:
  Compensation for Thermal Deformation of a Compact Lathe in Cutting Operations Using a Coolant Fluid with Temperature Measurements at a Few Specific Points. 527-538
• 
  Nikolay V. Ksenz, Igor V. Yudaev, Michael A. Taranov, Ivan G. Sidorcov, Alexander M. Semenikhin, Vasiliy A. Chernovolov:
  Determination of the Efficiency of the Operation Mode of Nonflowing Installation for Electroactivation of Water and Aqueous Solutions. 539-544
• 
  Shousong Jin, Xiao-Tao Tong, Yaliang Wang:
  Influencing Factors on Rotate Vector Reducer Dynamic Transmission Error. 545-556

Volume 13, Number 5, September 2019

The Best Paper Award 2019

• 
  Editorial: Congratulations! The Best Paper Award 2019. 571-572

Special Issue on the Latest Machine Tool Technologies and Manufacturing Processes

• 
  Yohichi Nakao, Hayato Yoshioka:
  Editorial: the Latest Machine Tool Technologies and Manufacturing Processes. 573
• 
  Leandro Batista da Silva, Hayato Yoshioka, Hidenori Shinno, Jiang Zhu:
  Tool Orientation Angle Optimization for a Multi-Axis Robotic Milling System. 574-582
• 
  Ryuta Sato, Kiichi Morishita, Isamu Nishida, Keiichi Shirase, Masanobu Hasegawa, Akira Saito, Takayuki Iwasaki:
  Improvement of Simultaneous 5-Axis Controlled Machining Accuracy by CL-Data Modification. 583-592
• 
  Yukitoshi Ihara, Koichiro Takubo, Tatsuo Nakai, Ryuta Sato:
  Effect of CAD/CAM Post Process on S-Shaped Machining Test for Five-Axis Machining Center. 593-601
• 
  Yohichi Nakao, Rei Kirigaya, Dmytro Fedorynenko, Akio Hayashi, Kenji Suzuki:
  Thermal Characteristics of Spindle Supported with Water-Lubricated Hydrostatic Bearings. 602-609
• 
  Akio Hayashi, Tatsuya Mukai, Yusuke Inomata, Yoshitaka Morimoto:
  Improvement of Reverse Motion of an NC Moving Table Based on Vector Control Method by Friction Force Compensation. 610-618
• 
  Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Fang-Jung Shiou, Shunichi Sawada, Hayato Yoshioka:
  Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-Machine Force Control. 619-630
• 
  Takuma Umezu, Daisuke Kono:
  Machining Process for a Thin-Walled Workpiece Using On-Machine Measurement of the Workpiece Compliance. 631-638
• 
  Keiji Ogawa, Takumi Imada, Haruki Kino, Heisaburo Nakagawa, Hitomi Kojima:
  Micro-End-Milling with Small Diameter Left Hand Helical Tool for High Quality Vertical Wall Machining. 639-647
• 
  Akira Hosokawa, Ryosuke Shimizu, Takahiro Kiwata, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto:
  Studies on Eco-Friendly Grinding with an Extremely Small Amount of Coolant - Applicability of Contact-Type Flexible Brush-Nozzle -. 648-656
• 
  Katsufumi Inazawa, Hitoshi Ohmori, Nobuhide Itoh:
  Effects of O₂ Fine Bubbles on ELID Grinding Using Conductive Rubber Bond Grinding Wheel. 657-664
• 
  Hideki Takezawa, Naotake Mohri, Toshiya Kusama:
  Changes in Surface Roughness Caused by Electrical Discharge Coating. 665-670

Regular Papers

• 
  Liangliang Yang, Hao Guo, Shuming Yang, Yohei Hoshino, Soichiro Suzuki, Dehua Gao, Ying Cao:
  Generation of a High-Precision Digital Elevation Model for Fields in Mountain Regions Using RTK-GPS. 671-678
• 
  Takamaru Suzuki, Kazuki Yoshikawa, Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami:
  Improved Method for Synchronizing Motion Accuracy of Linear and Rotary Axes Under Constant Feed Speed Vector at End Milling Point - Investigation of Motion Error Under NC-Commanded Motion -. 679-690
• 
  Doriana Marilena D'Addona, Alessandro A. G. Bruzzone Dime:
  Formal Tools for Management of Manufacturing Systems: A Multi Agents System Approach. 691-699
• 
  Isamu Nishida, Keiichi Shirase:
  Machine Tool Assignment Realized by Automated NC Program Generation and Machining Time Prediction. 700-707

Volume 13, Number 6, November 2019

Special Issue on Advanced Abrasive Process Technologies

• 
  Hirofumi Suzuki, Kazuhito Ohashi:
  Editorial: Advanced Abrasive Process Technologies. 721
• 
  Takekazu Sawa:
  Automating the Mold-Material Grinding Process. 722-727
• 
  Takashi Onishi, Teppei Takashima, Moriaki Sakakura, Koichi Sakamoto, Kazuhito Ohashi:
  Improvement of the Form Accuracy of a Slender Workpiece in Cylindrical Traverse Grinding. 728-735
• 
  Hiromi Isobe, Natsuki Sasada, Keisuke Hara, Jun Ishimatsu:
  Visualization of Stress Distribution by Photoelastic Method Under Ultrasonic Grinding Condition. 736-742
• 
  Mitsuyoshi Nomura, Naoya Makita, Tatsuya Fujii, Yongbo Wu:
  Effects of Water Supply Using Ultrasonic Atomization on the Working Life of MCF Slurry in MCF Polishing. 743-748
• 
  Moe Mekata, Minoru Ota, Keishi Yamaguchi, Kai Egashira:
  Mirror Finishing of SiC by UV-Assisted Constant-Pressure Grinding. 749-755
• 
  Hiroyuki Kodama, Hayato Koyama, Tomoaki Ishii, Yusuke Tanimoto, Kazuhito Ohashi:
  Concentric Mutual Lapping to Improve Sliding Surface Function of SiC Ceramics. 756-764
• 
  Yutaka Kameyama, Hideaki Sato, Ryokichi Shimpo:
  Ridge-Texturing for Wettability Modification by Using Angled Fine Particle Peening. 765-773

Regular Papers

• 
  Chaowen Dong, Yanhua Zou:
  New Magnetic Abrasive Finishing for Alumina Ceramic Plane Using Alternating Magnetic Fields. 775-779
• 
  Shigeru Nagasawa, Akihiro Yamamoto, Thepwachara Ruchirabha, Kazuki Umemoto:
  Effects of Blade Tip Profile on In-Plane Tensile Properties of Wedge-Notched Polypropylene Sheet. 780-786
• 
  Xiaona Yang, Can Peng, Lei Jin, Qiangyi Li:
  Unrelated Parallel-Machine Scheduling with Maintenance Activities and Rejection Penalties for Minimizing Total Cost. 787-795
• 
  Satoshi Yamane, Kouki Matsuo:
  Gap Detection Using Convolutional Neural Network and Adaptive Control in Robotic Plasma Welding. 796-802
• 
  Shota Okubo, Zhihao Gong, Kento Fujita, Ken Sasaki:
  Recognition of Transient Environmental Sounds Based on Temporal and Frequency Features. 803-809
• 
  Arata Kaneko, Taira Katayama, Shun Morishita:
  Micro Fabrication of Au Thin-Film by Transfer-Printing Using Atomic Diffusion Bonding. 810-816
• 
  Hibiki Ishide, Jiwang Yan:
  Study on Infrared Transmittance of Si-Polymer Hybrid Structure Press Molded Using a Coupling Agent. 817-824
• 
  Isamu Nishida, Shogo Adachi, Keiichi Shirase:
  Automated Process Planning System for End Milling Operation Constrained by Geometric Dimensioning and Tolerancing (GD&T). 825-833