default search action
IEEE Transactions on Industrial Electronics, Volume 51
Volume 51, Number 1, 2004
- Marian P. Kazmierkowski:
Message from the Editor-in-Chief. 2 - IEEE Industrial Electronics Society Awards - 2003 Presented at the 29th Annual Conference of the IEEE Industrial Electronics Society, Roanoke, VA, November 2-6, 2003. 3-4
- Haitham Abu-Rub
, Jaroslaw Guzinski
Advanced control of induction motor based on load angle estimation. 5-14 - Ching-Guo Chen, Tian-Hua Liu
Position control of a sensorless synchronous reluctance motor. 15-25 - Zi-Jiang Yang, Kouichi Miyazaki, Shunshoku Kanae, Kiyoshi Wada:
Robust position control of a magnetic levitation system via dynamic surface control technique. 26-34 - Ya-Fu Peng, Rong-Jong Wai, Chih-Min Lin:
Implementation of LLCC-resonant driving circuit and adaptive CMAC neural network control for linear piezoelectric ceramic motor. 35-48 - Andreas Bünte, Stephan Beineke:
High-performance speed measurement by suppression of systematic resolver and encoder errors. 49-53 - Douglas Braz Costa, Cláudio Manoel C. Duarte:
The ZVS-PWM active-clamping CUK converter. 54-60 - Jianguo Liu, Pragasen Pillay, Hugh Douglas:
Wavelet modeling of motor drives applied to the calculation of motor terminal overvoltages. 61-66 - Shinzo Tamai, Shotaro Murakami, Ryohei Uchida, Hirofumi Akagi:
Control and performance of a self-commutated GTO converter operating in parallel with line-commutated thyristor converters. 67-73 - Daniel A. Bennett, Richard H. Selfridge, John N. Harb, Donald T. Comer:
A control circuit for a microsensor hybrid power supply. 74-80 - Xiangning He, Yan Deng, Barry W. Williams, Stephen J. Finney, Zhaoming Qian:
A simple energy recovery circuit for high-power inverters with complete turn-on and turn-off snubbers. 81-88 - Haci Bodur
An improved ZCT-PWM DC-DC converter for high-power and frequency applications. 89-95 - Ahmad Maliki Omar, Nasrudin Abd. Rahim
Three-phase synchronous PWM for flyback converter with power-factor correction using FPGA ASIC design. 96-106 - Mario Eltabach, Ali Charara, Isamil Zein:
A comparison of external and internal methods of signal spectral analysis for broken rotor bars detection in induction motors. 107-121 - Christian Brañas
Study of output power variation due to component tolerances in LCsCp resonant inverters applied to HPS lamp control. 122-131 - G.-Myoung Lee, Dong-Choon Lee
Control of series active power filters compensating for source voltage unbalance and current harmonics. 132-139 - Byungcho Choi, Jaehyun Nho, Honnyong Cha, Taeyoung Ahn, Seungwon Choi:
Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy transfer device. 140-147 - Chwei-Sen Wang, Grant Covic, Oskar H. Stielau:
Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems. 148-157 - Lars Helle, Kim B. Larsen, Allan Holm Jorgensen, Stig Munk-Nielsen
Evaluation of modulation schemes for three-phase to three-phase matrix converters. 158-171 - Frank Hung-Fat Leung
Optimal and stable fuzzy controllers for nonlinear systems based on an improved genetic algorithm. 172-182 - Sitao Wu, Tommy W. S. Chow:
Induction machine fault detection using SOM-based RBF neural networks. 183-194 - Weiliang Xu
Pre-posed configuration of flexible redundant robot manipulators for impact vibration alleviating. 195-200 - Rong-Jong Wai, Meng-Chang Lee:
Intelligent optimal control of single-link flexible robot arm. 201-220 - Seiichiro Katsura, Kouhei Ohnishi:
Human cooperative wheelchair for haptic interaction based on dual compliance control. 221-228 - Kazuyuki Morioka
Human-following mobile robot in a distributed intelligent sensor network. 229-237 - Pitikhate Sooraksa, Guanrong Chen
On comparison of hybrid fuzzy PI plus conventional D controller versus fuzzy PI+D controller. 238-239 - Patrick W. Wheeler
Enhancement of matrix converter output waveform quality using minimized commutation times. 240-244 - Chakravarthini M. Saaj, Bijnan Bandyopadhyay, Heinz Unbehauen:
A minor correction to "A new algorithm for discrete-time sliding mode control using fast output sampling feedback". 244-247
Volume 51, Number 2, 2004
- J. Y. Hung, S. T. Hung:
Guest Editorial. 254-256 - Federico Cuesta
Parking maneuvers of industrial-like electrical vehicles with and without trailer. 257-269 - Robert Daily, David M. Bevly:
The use of GPS for vehicle stability control systems. 270-277 - Joanny Stéphant, Ali Charara, Dominique Meizel:
Virtual sensor: application to vehicle sideslip angle and transversal forces. 278-289 - Manu Parmar, John Y. Hung:
A sensorless optimal control system for an automotive electric power assist steering system. 290-298 - Marcello Montanari, Fabio Ronchi, Carlo Rossi, Alberto Tonielli:
Control of a camless engine electromechanical actuator: position reconstruction and dynamic performance analysis. 299-311 - Junha Kim, Jinhwan Jung, Kwanghee Nam:
Dual-inverter control strategy for high-speed operation of EV induction motors. 312-320 - Walter G. Koellner, Gerald M. Brown, José R. Rodríguez
Recent advances in mining haul trucks. 321-329 - Ching-Chih Tsai, Chih-Hung Huang:
Model reference adaptive predictive control for a variable-frequency oil-cooling machine. 330-339 - Alexander G. Loukianov, José M. Cañedo, Vadim I. Utkin, Javier Cabrera-Vázquez:
Discontinuous controller for power systems: sliding-mode block control approach. 340-353 - Nicolas Bonnail, Didier Tonneau, Franck Jandard, Gérard-André Capolino
Variable structure control of a piezoelectric actuator for a scanning tunneling microscope. 354-363 - Alfonso Damiano
Second-order sliding-mode control of DC drives. 364-373 - Jin-Woo Ahn, Sung-Jun Park, Dong-Hee Lee:
Hybrid excitation of SRM for reduction of vibration and acoustic noise. 374-380 - Chunxiang Wang, Yongzhang Wang, Ruqing Yang, Hua Lu:
Research on precision tension control system based on neural network. 381-386 - Péter Baranyi:
TP model transformation as a way to LMI-based controller design. 387-400 - Gerardo Escobar
An adaptive controller in stationary reference frame for D-statcom in unbalanced operation. 401-409 - Kwok-kuen Tse, B. M. T. Ho, Henry Shu-Hung Chung, S. Y. Ron Hui:
A comparative study of maximum-power-point trackers for photovoltaic panels using switching-frequency modulation scheme. 410-418 - Mariano López, Luis García de Vicuña
Current distribution control design for paralleled DC/DC converters using sliding-mode control. 419-428 - Hadi Youssef Kanaan, Hugo Fortin-Blanchette, Kamal Al-Haddad, Rachid Chaffai, Louis Duguay, Farhat Fnaiech:
Linear control design for a current-injection-based three-phase unity-power-factor rectifier. 429-438 - Ricardo Lúcio de Araujo Ribeiro
Fault-tolerant voltage-fed PWM inverter AC motor drive systems. 439-446 - Mariusz Malinowski
Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM). 447-454 - Chongming Qiao, Taotao Jin, Keyue Ma Smedley
One-cycle control of three-phase active power filter with vector operation. 455-463 - K. F. Leung, Frank H. F. Leung, Hak-Keung Lam, Steve S. H. Ling:
On interpretation of graffiti digits and characters for eBooks: neural-fuzzy network and genetic algorithm approach. 464-471 - Chin-Tsu Yen, Wan-De Weng, Yen Tsun Lin:
FPGA realization of a neural-network-based nonlinear channel equalizer. 472-479 - Giaime Ginesu, Daniele D. Giusto, Volker Märgner, Peter Meinlschmidt:
Detection of foreign bodies in food by thermal image processing. 480-490 - D. Bi, You Fu Li
Friction modeling and compensation for haptic display based on support vector machine. 491-500 - Tetsuya Muraoka, Hiroaki Ikeda:
Selection of display devices used at man-machine interfaces based on human factors. 501-506 - Kyu-Wang Lee, Doo-Hee Jung, In-Joong Ha:
An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers. 507-510 - Masoud Karimi-Ghartemani, Houshang Karimi, M. Reza Iravani
A magnitude/phase-locked loop system based on estimation of frequency and in-phase/quadrature-phase amplitudes. 511-517 - Xinbo Ruan, Jiangang Wang:
Calculation of the resonant capacitor of the improved current-doubler-rectifier ZVS PWM full-bridge converter. 518-520 - Sensorless control of AC machines. 521
Volume 51, Number 3, 2004
- Jian-Xin Xu, Sanjib Kumar Panda, Ya-Jun Pan
A modular control scheme for PMSM speed control with pulsating torque minimization. 526-536 - Dan Simon, Dennis L. Feucht:
Synchronous motor phase control by vector addition of induced winding voltages. 537-544 - Young Ahn Kwon, Sung-Hwan Kim:
A new scheme for speed-sensorless control of induction motor. 545-550 - Li Ran, Yong Liao:
Sampling-induced resonance in an encoderless vector-controlled induction motor drive. 551-557 - Tommy W. S. Chow, Shi Hai:
Induction machine fault diagnostic analysis with wavelet technique. 558-565 - Gerry Moschopoulos, Praveen K. Jain:
A novel single-phase soft-switched rectifier with unity power factor and minimal component count. 566-576 - Chung-Wook Roh, Seung-Hoon Han, Sung-Soo Hong, Sug-Chin Sakong, Myung-Joong Youn:
Dual-coupled inductor-fed DC/DC converter for battery drive applications. 577-584 - Haitham Abu-Rub
Predictive current control of voltage-source inverters. 585-593 - Fang Lin Luo, Hong Ye:
Positive output multiple-lift push-pull switched-capacitor Luo-converters. 594-602 - Roberto Cárdenas
Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed range. 603-614 - Jun-Young Lee, Jin-Sung Kim, Nam-Sung Jung, Bo-Hyung Cho:
The current injection method for AC plasma display panel (PDP) sustainer. 615-624 - Hirofumi Matsuo, Wenzhong Lin, Fujio Kurokawa, Tetsuro Shigemizu, Nobuya Watanabe:
Characteristics of the multiple-input DC-DC converter. 625-631 - Nikolaos P. Papanikolaou
Active voltage clamp in flyback converters operating in CCM mode under wide load variation. 632-640 - Bhim Singh
A review of three-phase improved power quality AC-DC converters. 641-660 - Ali Emadi:
Modeling and analysis of multiconverter DC power electronic systems using the generalized state-space averaging method. 661-668 - Brian A. Welchko, Maurício Beltrão de Rossiter Correa, Thomas A. Lipo:
A three-level MOSFET inverter for low-power drives. 669-674 - Wei Wen, Kam-Wah Siu, Yim-Shu Lee:
Design of a single-switch high-power-factor regulator with near-zero output current ripple. 675-685 - Mark J. Embrechts, Sándor Benedek:
Hybrid identification of nuclear power plant transients with artificial neural networks. 686-693 - Nagi Gebraeel, Mark A. Lawley, Richard Liu, Vijay Parmeshwaran:
Residual life predictions from vibration-based degradation signals: a neural network approach. 694-700 - Kyung Chang Lee
Timer selection for satisfying the maximum allowable delay using performance model of profibus token passing protocol. 701-710 - Min-Jung Lee, Young-Kiu Choi:
An adaptive neurocontroller using RBFN for robot manipulators. 711-717 - Joon Seop Oh, Yoon Ho Choi, Jin Bae Park, Yuan F. Zheng:
Complete coverage navigation of cleaning robots using triangular-cell-based map. 718-726 - Francisco Jurado
Neural network control for dynamic voltage restorer. 727-729 - Z. H. Shao:
Robust stability of uncertain neutral delay systems. 730-733 - Keng C. Wu:
A comprehensive analysis of current-mode control for DCM buck-boost converters. 733-735 - Ricardo Julián Mantz, Hernán De Battista
Comments on "variable-structure PID control to prevent integrator windup". 736-738 - Alan Scottedward Hodel, Charles E. Hall:
Authors' reply to comments on "variable-structure PID control to prevent integrator windup". 738-739 - Levent U. Gökdere, Marwan A. Simaan
Response to comments on "passivity-based control of saturated induction motors".
Volume 51, Number 4, 2004
- Giuseppe Buja
Guest Editorial. 742-743 - Giuseppe Buja, Marian P. Kazmierkowski:
Direct torque control of PWM inverter-fed AC motors - a survey. 744-757 - Nik Rumzi Nik Idris
Direct torque control of induction machines with constant switching frequency and reduced torque ripple. 758-767 - Yen-Shin Lai, Wen-Ke Wang, Yen-Chang Chen:
Novel switching techniques for reducing the speed ripple of AC drives with direct torque control. 768-775 - Vanja Ambrozic
Band-constrained technique for direct torque control of induction motor. 776-784 - Cristian Lascu
Variable-structure direct torque control - a class of fast and robust controllers for induction machine drives. 785-792 - Julius Luukko, Olli Pyrhönen, Markku Niemelä, Juha J. Pyrhönen:
Limitation of the load angle in a direct-torque-controlled synchronous machine drive. 793-798 - Muhammed Fazlur Rahman
Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies. 799-809 - Andreas Steimel:
Direct self-control and synchronous pulse techniques for high-power traction inverters in comparison. 810-820 - Kinjiro Yoshida, Hiroshi Takami, Akihiro Fujii:
Smooth section crossing of controlled-repulsive PM LSM vehicle by DTC method based on new concept of fictitious section. 821-826 - José R. Rodríguez
Direct torque control with imposed switching frequency in an 11-level cascaded inverter. 827-833 - José R. Rodríguez
A new modulation method to reduce common-mode voltages in multilevel inverters. 834-839 - Margherita DiLorenzo del Casale, Nicola Femia
Selection of optimal closed-loop controllers for DC-DC voltage regulators based on nominal and tolerance design. 840-849 - Juan Díaz
A new control strategy for an AC/DC converter based on a piezoelectric transformer. 850-856 - Juan Díaz
Intelligent and universal fast charger for Ni-Cd and Ni-MH batteries in portable applications. 857-863 - Y. P. Benny Yeung, K. W. Eric Cheng
Unified analysis of switched-capacitor resonant converters. 864-873 - Wennan Guo, Praveen K. Jain:
A power-factor-corrected AC-AC inverter topology using a unified controller for high-frequency power distribution architecture. 874-883 - Dimitrie Alexa, Adriana Sirbu
An analysis of three-phase rectifiers with near-sinusoidal input currents. 884-891 - Tzann-Shin Lee:
Lagrangian modeling and passivity-based control of three-phase AC/DC voltage-source converters. 892-902 - Smriti Kansal, Gerald Cook:
Use of a sinusoidal series for modeling discrete windowed data as an alternative to interpolation. 903-909 - Seppo J. Ovaska, Olli Vainio:
Evolutionary-programming-based optimization of reduced-rank adaptive filters for reference generation in active power filters. 910-916 - Witoon Panusittikorn, Min Cheol Lee, Paul I. Ro
Modeling and sliding-mode control of friction-based object transport using two-mode ultrasonic excitation. 917-926 - Sewan Choi, Minsoo Jang:
A reduced-rating hybrid filter to suppress neutral current harmonics in three-phase four-wire systems. 927-930 - Jee-Hoon Jung
Stability improvement of V/f-controlled induction motor drive systems by a dynamic current compensator. 930-933 - Ming Tsung Tsai:
Design of a compact series-connected AC Voltage regulator with an improved control algorithm. 933-936
Volume 51, Number 5, 2004
- Karel Jezernik, Kouhei Ohnishi:
Guest Editorial. 938-939 - Yutaka Uchimura, Takahiro Yakoh
Bilateral robot system on the real-time network structure. 940-946 - Kazuaki Itoh
Optimal design of robust vibration suppression controller using genetic algorithms. 947-953 - Yoichi Hori:
Future vehicle driven by electricity and Control-research on four-wheel-motored "UOT electric march II". 954-962 - Andreja Rojko, Karel Jezernik:
Sliding-mode motion controller with adaptive fuzzy disturbance estimation. 963-971 - Klaus Löffler, Michael Gienger, Friedrich Pfeiffer, Heinz Ulbrich:
Sensors and control concept of a biped robot. 972-980 - Jin Zhao, Bimal K. Bose:
Neural-network-based waveform Processing and Delayless filtering in power electronics and AC drives. 981-991 - Ali Emadi:
Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method. 992-1000 - Venkata Dinavahi
Design of a real-time digital Simulator for a D-STATCOM system. 1001-1008 - Bor-Ren Lin, Yung-Chuan Lee:
Three-phase power quality compensator under the unbalanced sources and nonlinear loads. 1009-1017 - Paolo Mattavelli
Repetitive-based control for selective harmonic compensation in active power filters. 1018-1024 - Sidney R. Bowes, Ata Sevinc
New natural observer applied to speed-sensorless DC servo and induction motors. 1025-1032 - Marko Hinkkanen
Analysis and design of full-order flux observers for sensorless induction motors. 1033-1040 - Veli-Matti Leppänen, Jorma Luomi:
Speed-sensorless induction Machine control for zero speed and frequency. 1041-1047 - Cristian Lascu
A sensorless hybrid DTC drive for high-volume low-cost applications. 1048-1055 - Domenico Casadei
Theoretical and experimental analysis for the RMS current ripple minimization in induction motor drives controlled by SVM technique. 1056-1065 - Heath F. Hofmann, Seth R. Sanders, Ahmed El-Antably:
Stator-flux-oriented vector control of synchronous reluctance Machines with maximized efficiency. 1066-1072 - Maurício Beltrão de Rossiter Correa, Cursino Brandão Jacobina, Edison Roberto Cabral da Silva, Antonio Marcus Nogueira de Lima
Vector control strategies for single-phase induction motor drive systems. 1073-1080 - M. A. Jabbar, Ashwin M. Khambadkone
Space-vector Modulation in a two-phase induction motor drive for constant-power operation. 1081-1088 - Gautam Poddar, V. T. Ranganathan:
Sensorless field-oriented control for double-inverter-fed wound-rotor induction motor drive. 1089-1096 - Jason R. Stack, Ronald G. Harley, Thomas G. Habetler:
An amplitude Modulation detector for fault diagnosis in rolling element bearings. 1097-1102 - Jeferson M. Correa, Felix Alberto Farret
An electrochemical-based fuel-cell model suitable for electrical engineering automation approach. 1103-1112 - Lazhar Ben-Brahim:
On the compensation of dead time and zero-current crossing for a PWM-inverter-controlled AC servo drive. 1113-1118 - Dorin O. Neacsu:
Current control with fast transient for three-phase AC/DC boost converters. 1117-1121 - Smriti Kansal, Gerald Cook:
Correction to "Use of a Sinusoidal Series for Modeling Discrete Windowed Data as an Alternative to Interpolation". 1122
Volume 51, Number 6, 2004
- Mo-Yuen Chow:
Guest Editorial. 1126 - Lingfeng Wang, Bin Huang, Kay Chen Tan:
Fault-tolerant vibration control in a networked and embedded rocket fairing system. 1127-1141 - David P. Buse, Qing-Hua Wu:
Mobile agents for remote control of distributed systems. 1142-1149 - Kyung Chang Lee
IEEE-1451-based smart module for in-vehicle networking systems of intelligent vehicles. 1150-1158 - Pau Martí, José Yépez, Manel Velasco
Managing quality-of-control in network-based control systems by controller and message scheduling co-design. 1159-1167 - Juan Garcia Ortega, Francisco R. Palomo
Reconfigurable distributed network control system for industrial plant automation. 1168-1180 - Darren Lim, Adnan H. Anbuky
A distributed industrial battery management network. 1181-1193 - Aggeliki S. Prayati, Christos Koulamas
A methodology for the development of distributed real-time control applications with focus on task allocation in heterogeneous systems. 1194-1207 - Christos Koulamas
Using cut-through forwarding to retain the real-time properties of Profibus over hybrid wired/wireless architectures. 1208-1217 - Yodyium Tipsuwan
Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation - part I: networked control. 1218-1227 - Yodyium Tipsuwan
Gain scheduler middleware: a methodology to enable existing controllers for networked control and teleoperation-part II: teleoperation. 1228-1237 - Michele Di Santo, Alfredo Vaccaro
A distributed architecture for online power systems security analysis. 1238-1248 - Stefan Soucek, Thilo Sauter
Quality of service concerns in IP-based control systems. 1249-1258 - Noriaki Ando
Networked telemicromanipulation systems "Haptic Loupe". 1259-1271 - Hiromasa Takahashi, Hiroaki Nishi
Autonomous decentralized control for formation of multiple mobile robots considering ability of robot. 1272-1279 - Olorunfemi Ojo:
The generalized discontinuous PWM scheme for three-phase voltage source inverters. 1280-1289 - In-Dong Kim, Eui-Cheol Nho, Heung-Geun Kim, Jong Sun Ko:
A generalized Undeland snubber for flying capacitor multilevel inverter and converter. 1290-1296 - Anawach Sangswang
Noise characteristics of DC-DC boost converters: experimental validation and performance evaluation. 1297-1304 - Seán Cian O'Mathuna, Patrick Byrne, Gerald Duffy, Weimin Chen, Matthias Ludwig, Terence O'Donnell, Paul McCloskey
Packaging and integration technologies for future high-frequency power supplies. 1305-1312 - Tzu-Yen Chang, Xu Wang, David A. Evans, S. L. Roberson, Jim P. Zheng:
Characterization of tantalum oxide-ruthenium oxide hybrid capacitors. 1313-1317 - Marko Hinkkanen
Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design. 1318-1328 - Gautam Poddar, V. T. Ranganathan:
Direct torque and frequency control of double-inverter-fed slip-ring induction motor drive. 1329-1337 - M. A. Jabbar, Ashwin M. Khambadkone
Quasi-resonant-converters-based high-efficiency spindle motor drives for magnetic data storage. 1338-1343 - Liang-Rui Chen:
PLL-based battery charge circuit topology. 1344-1346 - Siew Kei Lam, K. Sridharan, Thambipillai Srikanthan:
Hardware-efficient schemes for logarithmic approximation and binary search with application to visibility graph construction. 1346-1348
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-20 20:49 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: