default search action
IEEE Transactions on Industrial Electronics, Volume 49
Volume 49, Number 1, 2002
- David A. Torrey:
Switched reluctance generators and their control. 3-14 - T. J. E. Miller:
Optimal design of switched reluctance motors. 15-27 - Iqbal Husain:
Minimization of torque ripple in SRM drives. 28-39 - Mehrdad Ehsani, Babak Fahimi:
Elimination of position sensors in switched reluctance motor drives: state of the art and future trends. 40-47 - Robert B. Inderka, Marcus Menne, Rik W. De Doncker:
Control of switched reluctance drives for electric vehicle applications. 48-53 - Jürgen Reinert, Stefan Schröder:
Power-factor correction for switched reluctance drives. 54-57 - M. El-Habrouk, M. K. Darwish:
A new control technique for active power filters using a combined genetic algorithm/conventional analysis. 58-66 - Tsang-Li Tai, Jian-Shiang Chen:
UPS inverter design using discrete-time sliding-mode control scheme. 67-75 - Teuvo Suntio
, Idris Gadoura, Kai Zenger:
Input filter interactions in peak-current-mode-controlled buck converter operating in CICM. 76-86 - Miran Rodic
Speed-sensorless sliding-mode torque control of an induction motor. 87-95 - Hong-Zhou Tan, Nariman Sepehri:
Parametric fault diagnosis for electrohydraulic cylinder drive units. 96-106 - Felix Grasser, Aldo D'Arrigo, Silvio Colombi, Alfred C. Rufer
JOE: a mobile, inverted pendulum. 107-114 - Chih-Min Lin, Chun-Fei Hsu:
Neural-network-based adaptive control for induction servomotor drive system. 115-123 - K. L. Shi, Tze-Fun Chan, Yiu-Kwong Wong, S. L. Ho:
Speed estimation of an induction motor drive using an optimized extended Kalman filter. 124-133 - Faa-Jeng Lin
Adaptive backstepping control using recurrent neural network for linear induction motor drive. 134-146 - Roberto Leidhold
Field-oriented controlled induction generator with loss minimization. 147-156 - Hamid A. Toliyat, Lei Hao, Deepak S. Shet, Thomas A. Nondahl:
Position-sensorless control of surface-mount permanent-magnet AC (PMAC) motors at low speeds. 157-164 - Hang-Seok Choi, Bo-Hyung Cho:
Novel zero-current-switching (ZCS) PWM switch cell minimizing additional conduction loss. 165-172 - Bor-Ren Lin, Yi-Lang Hou:
Single-phase integrated power quality compensator based on capacitor-clamped configuration. 173-185 - Keliang Zhou, Danwei Wang:
Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis [three-phase inverters]. 186-196 - Chandan Chakraborty, Muneaki Ishida, Yoichi Hori:
Novel half-bridge resonant converter topology realized by adjusting transformer parameters. 197-205 - Feel Soon Kang, Sung-Jun Park, Cheul-U. Kim:
ZVZCS single-stage PFC AC-to-DC half-bridge converter. 206-216 - Toshihiko Noguchi, Shigenori Togashi, Ryo Nakamoto:
Short-current pulse-based maximum-power-point tracking method for multiple photovoltaic-and-converter module system. 217-223 - Antonio Visioli
On the trajectory tracking control of industrial SCARA robot manipulators. 224-232 - Bojan Nemec, Leon Zlajpah:
Force control of redundant robots in unstructured environment. 233-240 - Yasutaka Umeda, Takahiro Yakoh
Configuration and readhesion control for a mobile robot with external sensors. 241-247 - Toshiyuki Murakami, Klemens Kahlen, Rik W. De Doncker:
Robust motion control based on projection plane in redundant manipulator. 248-255 - Shyh-Jier Huang, Fu-Sheng Pai:
Design and operation of burn-in test system for three-phase uninterruptible power supplies. 256-263 - Ravindra R. Mudholkar, Shashikant R. Sawant:
Fuzzy logic transformer build estimation. 264-267
Volume 49, Number 2, 2002
- Patrick W. Wheeler
Matrix converters: a technology review. 276-288 - Frede Blaabjerg
Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions. 289-296 - Jochen Mahlein, Manfred Bruckmann, Michael Braun:
Passive protection strategy for a drive system with a matrix converter and an induction machine. 297-303 - Steffen Bernet, Srinivas Ponnaluri, Ralph Teichmann:
Design and loss comparison of matrix converters, and voltage-source converters for modern AC drives. 304-314 - Christian Klumpner
Experimental evaluation of ride-through capabilities for a matrix converter under short power interruptions. 315-324 - Christian Klumpner
A new matrix converter motor (MCM) for industry applications. 325-335 - Christian Klumpner
New solutions for a low-cost power electronic building block for matrix converters. 336-344 - Jie Chang, Tom Sun, Anhua Wang:
Highly compact AC-AC converter achieving a high voltage transfer ratio. 345-352 - Ralph Teichmann, Jun Oyama:
ARCP soft-switching technique in matrix converters. 353-361 - Peter Mutschler, Matthias Marcks:
A direct control method for matrix converters. 362-369 - Domenico Casadei
Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state. 370-381 - Patrick W. Wheeler
Gate drive level intelligence and current sensing for matrix converter current commutation. 382-389 - Eduardo P. Wiechmann
Continuously motor-synchronized ride-through capability for matrix-converter adjustable-speed drives. 390-400 - Olaf Simon, Jochen Mahlein, Mark Nils Muenzer, Manfred Bruckmann:
Modern solutions for industrial matrix-converter applications. 401-406 - Jochen Mahlein, Jens Igney
Matrix converter commutation strategies with and without explicit input voltage sign measurement. 407-414 - Bruce W. Bomar:
Implementation of microprogrammed control in FPGAs. 415-422 - Mehrdad Moallem:
Electron-beam position monitoring and feedback control in Duke Free-Electron Laser Facility. 423-432 - Péter Baranyi, Yeung Yam, Annamária R. Várkonyi-Kóczy, Ronald J. Patton, Pál Michelberger, Masaharu Sugiyama:
SVD-based complexity reduction to TS fuzzy models. 433-443 - Surapong Suwankawin, Somboon Sangwongwanich:
A speed-sensorless IM drive with decoupling control and stability analysis of speed estimation. 444-455 - Jin-Kuk Chung, Gyu-Hyeong Cho:
A new soft recovery PWM quasi-resonant converter with a folding snubber network. 456-461 - Franck Betin, Daniel Pinchon, Gérard-André Capolino
A time-varying sliding surface for robust position control of a DC motor drive. 462-473 - Nobuyoshi Mutoh, Mitsukatsu Ogata, Kayhan Gulez, Fumio Harashima:
New methods to suppress EMI noises in motor drive systems. 474-485 - R. Lynn Kirlin, Michael M. Bech
Analysis of power and power spectral density in PWM inverters with randomized switching frequency. 486-499 - Raphaël Canals
A biprocessor-oriented vision-based target tracking system. 500-506 - Masayoshi Kamiya, Hiroaki Ikeda, Shigenobu Shinohara:
Wavelength-division-multiplexed analog transmission through plastic optical fiber for use in factory communications. 507-510
Volume 49, Number 3, 2002
- Chakravarthini M. Saaj, Bijnan Bandyopadhyay, Heinz Unbehauen:
A new algorithm for discrete-time sliding-mode control using fast output sampling feedback. 518-523 - Kyeong-Hwa Kim
A nonlinear speed control for a PM synchronous motor using a simple disturbance estimation technique. 524-535 - Andrew J. Chipperfield
Fuzzy scheduling control of a gas turbine aero-engine: a multiobjective approach. 536-548 - Sangcheol Lee, Kwanghee Nam:
An overvoltage suppression scheme for AC motor drives using a half DC-link voltage level at each PWM transition. 549-557 - Kuo-Kai Shyu, Chiu-Keng Lai, Yao-Wen Tsai
A newly robust controller design for the position control of permanent-magnet synchronous motor. 558-565 - Qing-Guo Wang, Yong Zhang, Xiaogang Huang:
Virtual feedforward control for asymptotic rejection of periodic disturbance. 566-573 - Ashwin M. Khambadkone
Compensated synchronous PI current controller in overmodulation range and six-step operation of space-vector-modulation-based vector-controlled drives. 574-580 - Gabriel Garcerá
Sensitivity study of the control loops of DC-DC converters by means of robust parametric control theory. 581-586 - Chang-Ming Liaw, Wen-Chin Yu, Thin-Huo Chen:
Random vibration test control of inverter-fed electrodynamic shaker. 587-594 - Tsu-Hua Ai, Jiann-Fuh Chen, Tsorng-Juu Liang:
A random switching method for HPWM full-bridge inverter. 595-597 - Arturo Fernández, Javier Sebastián
Low-power flyback converter with synchronous rectification for a system with AC power distribution. 598-606 - Thomas M. Wolbank, Reinhard Wöhrnschimmel, Hans Hauser:
Transient simulation of lamination material properties in electrical machines. 607-612 - Chi Kwan Lee, S. Y. Ron Hui
A 31-level cascade inverter for power applications. 613-617 - Kwok-kuen Tse, Henry Shu-Hung Chung, S. Y. Ron Hui
A comparative study of carrier-frequency modulation techniques for conducted EMI suppression in PWM converters. 618-627 - José M. Quero, Juan Manuel Carrasco Solís
Implementation of a neural controller for the series resonant converter. 628-639 - Jiabin Wang
A low-power, linear, permanent-magnet generator/energy storage system. 640-648 - Jeong-Il Kang, Chung-Wook Roh, Gun-Woo Moon, Myung-Joong Youn:
Phase-shifted parallel-input/series-output dual converter for high-power step-up applications. 649-652 - Seok Ho Jeon, Kwang-Kyo Oh, Jin Young Choi:
Flux observer with online tuning of stator and rotor resistances for induction motors. 653-664 - Luis Oscar de Araujo Porto Henriques, Paulo J. Costa Branco
Proposition of an offline learning current modulation for torque-ripple reduction in switched reluctance motors: design and experimental evaluation. 665-676 - W. X. Shen, Ching Chuen Chan, Edward W. C. Lo, K. T. Chau
Adaptive neuro-fuzzy modeling of battery residual capacity for electric vehicles. 677-684 - P. T. Chan, Ahmad B. Rad, Kai Ming Tsang
Optimization of fused fuzzy systems via genetic algorithms. 685-692 - Suk Lee, Kyung Chang Lee
Integration of mobile vehicles for automated material handling using Profibus and IEEE 802.11 networks. 693-701 - Olli Vainio, Seppo J. Ovaska:
Harmonics-resistant adaptive algorithm for line-frequency signal processing. 702-706 - Yasutaka Fujimoto
Dynamic model of decentralized systems with informational connection. 707-715 - K. Sundareswaran, Mullangi Chandra:
Evolutionary approach for line current harmonic reduction in AC/DC converters. 716-719
Volume 49, Number 4, 2002
- José Rodríguez
Multilevel inverters: a survey of topologies, controls, and applications. 724-738 - Annette R. von Jouanne, Shaoan Dai, Haoran Zhang:
A multilevel inverter approach providing DC-link balancing, ride-through enhancement, and common-mode voltage elimination. 739-745 - Keith A. Corzine, Johnson Yuen, James R. Baker:
Analysis of a four-level DC/DC buck converter. 746-751 - Mario Marchesoni, Pierluigi Tenca:
Diode-clamped multilevel converters: a practicable way to balance DC-link voltages. 752-765 - Keith A. Corzine, James R. Baker:
Reduced-parts-count multilevel rectifiers. 766-774 - Takashi Ishida, Kouki Matsuse, Tetsuya Miyamoto, Kiyoaki Sasagawa, Lipei Huang:
Fundamental characteristics of five-level double converters with adjustable dc voltages for induction motor drives. 775-782 - Yoshitaka Kawabata, Motoshi Nasu, Takuya Nomoto, Emenike C. Ejiogu, Takao Kawabata:
High-efficiency and low acoustic noise drive system using open-winding AC motor and two space-vector-modulated inverters. 783-789 - Xinbo Ruan, Dayu Xu, Linquan Zhou, Bin Li, Qianhong Chen:
Zero-voltage-switching PWM three-level converter with two clamping diodes. 790-799 - Xiaoming Yuan, Ivo Barbi
Zero-voltage switching for the neutral-point-clamped (NPC) inverter. 800-808 - Miguel F. Escalante
Flying capacitor multilevel inverters and DTC motor drive applications. 809-815 - Hans Ertl, Johann W. Kolar, Franz C. Zach:
Analysis of a multilevel multicell switch-mode power amplifier employing the "flying-battery" concept. 816-823 - Abraham J. Visser, Johan H. R. Enslin, Hendrik du T. Mouton
Transformerless series sag compensation with a cascaded multilevel inverter. 824-831 - Remus Teodorescu, Frede Blaabjerg
Multilevel inverter by cascading industrial VSI. 832-838 - José R. Rodríguez
High-voltage multilevel converter with regeneration capability. 839-846 - Brendan P. McGrath
An analytical technique for the determination of spectral components of multilevel carrier-based PWM methods. 847-857 - Brendan P. McGrath
Multicarrier PWM strategies for multilevel inverters. 858-867 - Mansour Hashad, Jan Iwaszkiewicz:
A novel orthogonal-vectors-based topology of multilevel inverters. 868-874 - Siriroj Sirisukprasert, Jih-Sheng Lai
Optimum harmonic reduction with a wide range of modulation indexes for multilevel converters. 875-881 - José R. Rodríguez
A vector control technique for medium-voltage multilevel inverters. 882-888 - Jaime Rodriguez Arribas, Carlos Mario Vega González:
Optimal vector control of pumping and ventilation induction motor drives. 889-895 - Tingbsu Su, Muneaki Ishida, Takamasa Hori:
Suppression control method for torque vibration of three-phase HB-type stepping motor utilizing feedforward control. 896-904 - Ren C. Luo, Long-Yeu Chung:
Stabilization for linear uncertain system with time latency. 905-910 - Hou-Tsan Lee, Li-Chen Fu
Sensorless speed tracking of induction motor with unknown torque based on maximum power transfer. 911-924 - Byungcho Choi, Jaeyeol Kim, Bo H. Cho, Seungwon Choi, Carl M. Wildrick:
Designing control loop for DC-to-DC converters loaded with unknown AC dynamics. 925-932 - Ren C. Luo, Long-Yeu Chung, Chang-Hua Lien:
A novel symmetric cryptography based on the hybrid Haar wavelets encoder and chaotic masking scheme. 933-944
Volume 49, Number 5, 2002
- Peter W. Hammond:
Enhancing the reliability of modular medium-voltage drives. 948-954 - Thierry A. Meynard, Henri Foch, Philippe Thomas, Jacques Courault, Roland Jakob, Manfred Nahrstaedt:
Multicell converters: basic concepts and industry applications. 955-964 - Afef Bennani-Ben Abdelghani
Use of extra degrees of freedom in multilevel drives. 965-977 - Thierry A. Meynard, Henri Foch, François Forest, Christophe Turpin
Multicell converters: derived topologies. 978-987 - Christophe Turpin
Fault management of multicell converters. 988-997 - Guillaume Gateau, Maurice Fadel
Multicell converters: active control and observation of flying-capacitor voltages. 998-1008 - Keith A. Corzine, James R. Baker:
Multilevel voltage-source duty-cycle modulation: analysis and implementation. 1009-1016 - Hendrik du T. Mouton
Natural balancing of three-level neutral-point-clamped PWM inverters. 1017-1025 - Josep Pou
New feedforward space-vector PWM method to obtain balanced AC output voltages in a three-level neutral-point-clamped converter. 1026-1034 - Giri Venkataramanan
Reciprocity-transposition-based sinusoidal pulsewidth modulation for diode-clamped multilevel converters. 1035-1047 - Hans Ertl, Johann W. Kolar, Franz C. Zach:
A novel multicell DC-AC converter for applications in renewable energy systems. 1048-1057 - Leon M. Tolbert
Charge balance control schemes for cascade multilevel converter in hybrid electric vehicles. 1058-1064 - Martin Janssen, Andreas Steimel:
Direct self control with minimum torque ripple and high dynamics for a double three-level GTO inverter drive. 1065-1071 - Diego Soto
A comparison of high-power converter topologies for the implementation of FACTS controllers. 1072-1080 - Joachim Böcker, Jörg Janning, Helmut Jebenstreit:
High dynamic control of a three-level voltage-source-converter drive for a main strip mill. 1081-1092 - José R. Rodríguez
Novel 20-MW downhill conveyor system using three-level converters. 1093-1100 - Sergio L. Toral Marín
Digital stochastic realization of complex analog controllers. 1101-1109 - Bong-Hwan Kwon, Gang-Youl Jeong, Sung-Hoon Han, Duk-Ho Lee:
Novel line conditioner with voltage up/down capability. 1110-1119 - Eun-Soo Kim, Yoon-Ho Kim:
A ZVZCS PWM FB DC/DC converter using a modified energy-recovery snubber. 1120-1127 - Yu-Kang Lo, Sheng-Yuan Ou, Huang-Jen Chiu:
On evaluating the current distortion of the single-phase switch-mode rectifiers with current slope maps. 1128-1137 - Jesus Leyva-Ramos, Jorge A. Morales-Saldaña, Margarito Martinez-Cruz
Robust stability analysis for current-programmed regulators. 1138-1145 - Raymond L. Newsom, William C. Dillard, R. M. Nelms:
Digital power-factor correction for a capacitor-charging power supply. 1146-1153 - Marcelo Godoy Simões
A high-torque low-speed multiphase brushless machine-a perspective application for electric vehicles. 1154-1164 - Luís Almeida
Schedulability analysis of real-time traffic in WorldFIP networks: an integrated approach. 1165-1174 - Yu-Kang Lo, Tzu-Herng Song, Huang-Jen Chiu:
Analysis and elimination of voltage imbalance between the split capacitors in half-bridge boost rectifiers. 1175-1177 - Adnan Derdiyok, Mustafa K. Güven, Habib-ur Rehman
Design and implementation of a new sliding-mode observer for speed-sensorless control of induction machine. 1177-1182
Volume 49, Number 6, 2002
- Luís Almeida
The FTT-CAN protocol: why and how. 1189-1201 - Gianluca Cena
Achieving round-robin access in controller area networks. 1202-1213 - Marco Conti
Design and analysis of RT-Ring: a protocol for supporting real-time communications. 1214-1226 - Gianluca Cena
A multistage hierarchical distributed arbitration technique for priority-based real-time communication systems. 1227-1239 - Hans A. Hansson
Integrating reliability and timing analysis of CAN-based systems. 1240-1250 - Paolo Castelpietra, Yeqiong Song
Analysis and simulation methods for performance evaluation of a multiple networked embedded architecture. 1251-1264 - Andreas Willig, Martin Kubisch, Christian Hoene, Adam Wolisz:
Measurements of a wireless link in an industrial environment using an IEEE 802.11-compliant physical layer. 1265-1282 - Steven Senini, Peter J. Wolfs
Analysis and design of a multiple-loop control system for a hybrid active filter. 1283-1292 - János Hamar, István Nagy:
Control features of dual-channel DC-DC converters. 1293-1305 - Nazeih M. Botros, Jian Yang, Philip Feinsilver, René Schott:
Hardware realization of Krawtchouk transform using VHDL modeling and FPGAs. 1306-1312 - Kao-Shing Hwang
A propagating interface model strategy for global trajectory planning among moving obstacles. 1313-1322 - Rong-Jong Wai:
Development of new training algorithms for neuro-wavelet systems on the robust control of induction servo motor drive. 1323-1341 - Ching Chuen Chan, Zhengming Zhao, Chang Qian, Shuo Meng:
Comparisons of PWM and one-cycle control for power amplifier with multilevel converter. 1342-1344 - Christos Mademlis, Nikos Margaris:
Loss minimization in vector-controlled interior permanent-magnet synchronous motor drives. 1344-1347
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-15 19:22 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: