default search action
Production Engineering, Volume 8
Volume 8, Numbers 1-2, March 2014
- Uwe Heisel, Thomas Stehle, Michael Schaal, Rocco Eisseler:
Burr formation in short hole drilling by ultrasonic assistance. 1-6 - Sebastian Rösel, Marion Merklein:
Improving formability due to an enhancement of sealing limits caused by using a smart fluid as active fluid medium for hydroforming. 7-15 - Simon Seuren, Joachim Seitz, Alexander Krämer, Markus Bambach
, Gerhard Hirt:
Accounting for shear deformation in fast models for plate rolling. 17-24 - Marco Müller, Quang-Ut Huynh, Eckart Uhlmann, Manfred H. Wagner:
Study of inkjet printing as additive manufacturing process for gradient polyurethane material. 25-32 - Dirk Biermann
Optimization of guide pads for the BTA deep hole drilling of high alloyed steels by microfinishing. 33-40 - Jan C. Aurich
Analysis of the machining accuracy when dry turning via experiments and finite element simulations. 41-50 - Mischa Jahn, Heiko Brüning, Alfred Schmidt
Energy dissipation in laser-based free form heading: a numerical approach. 51-61 - Bernd-Arno Behrens
A method to detect the level and direction of mechanical forces with the aid of load-induced martensitic phase transformation. 63-72 - Ralf Frohmüller, Martin Beutner, Max Köchig, Bernhard Karpuschewski
High speed temperature measurement in gear hobbing: Part I - design, concept and physical operation mode of the infrared-camera. 73-79 - Laura Klein, Tobias Wagner, Christoph Buchheim
A procedure for the evaluation and compensation of form errors by means of global isometric registration with subsequent local reoptimization. 81-89 - Bernd-Arno Behrens
Temperature-dependent anisotropic material modeling of the sheet metal component within the polymer injection forming process. 91-99 - Haiyan Zhang, Chen Zhang, Jilin Zhang, Laishui Zhou:
Tool wear model based on least squares support vector machines and Kalman filter. 101-109 - Eberhard Abele, Jia Tian:
Estimation of the rotational speed limit of milling cutters with screwed indexable inserts. 111-119 - Uwe Heisel, Sergii Pasternak, Thomas Stehle, S. Schetter:
Using alternative materials in the cutting tools applications. 121-129 - Kolja Andreas, Marion Merklein:
Improvement of surface integrity of cold forging tools by adaption of tool making process. 131-141 - Kai Magenheimer, Gunther Reinhart, Cornelius S. L. Schutte
Lean management in indirect business areas: modeling, analysis, and evaluation of waste. 143-152 - Bernd-Arno Behrens
Towards a definition of large scale products. 153-164 - A. Nemeti, Berend Denkena
Time-oriented pricing for the tool and mould manufacturing industry. 165-173 - Stefan Schwarz, A. Sing, Michael F. Zaeh
Identification and evaluation of uncertainties and errors in dynamic models of casted machine tool components. 175-185 - Bijoy Mandal, Gobinda Chandra Das, Santanu Das
Improving grinding fluid delivery using pneumatic barrier and compound nozzle. 187-193 - Andreas Schubert
Joining by forming of piezoceramic macro-fiber arrays within micro-structured surfaces of aluminum sheets. 195-205 - Jürgen Fleischer
Method to compensate production related deviations for the assembly of space-frame-structures. 207-216 - Makoto Fujishima, Masahiko Mori, Yohei Oda:
Energy-efficient manufacturing on machine tools by machining process improvement. 217-224 - Martin Manns, Nestor Andres Arteaga Martin:
A vagueness measure for concurrent engineering of manual assembly lines. 225-231 - Mohamed Kashkoush, Hoda A. ElMaraghy:
Consensus tree method for generating master assembly sequence. 233-242 - Egon Müller, Timo Stock, Rainer Schillig:
A method to generate energy value-streams in production and logistics in respect of time- and energy-consumption. 243-251
Volume 8, Number 3, June 2014
- Bernd-Arno Behrens
Application of methods for ecological optimization of crank shaft forging process. 253-261 - Fritz Klocke, Daniel Trauth, Fabian Schongen, A. Shirobokov:
Analysis of friction between stainless steel sheets and machine hammer peened structured tool surfaces: experimental and numerical investigation of the lubricated interaction gap. 263-272 - Berend Denkena
Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum. 273-282 - Stefan Veenaas, Hanna Wielage, Frank Vollertsen
Joining by laser shock forming: realization and acting pressures. 283-290 - Heinrich Wernsing, Maxim Gulpak, Christof Büskens
Enhanced method for the evaluation of the thermal impact of dry machining processes. 291-300 - Ravi Shankar Anand, Karali Patra
Size effects in micro drilling of carbon fiber reinforced plastic composite. 301-307 - Florian Degen, Fritz Klocke, Thomas Bergs, Philipp Ganser:
Comparison of rotational turning and hard turning regarding surface generation. 309-317 - J. R. Flachs, Meisam Salahshoor, Shreyes N. Melkote:
Mechanistic models of thrust force and torque in step-drilling of Al7075-T651. 319-333 - Bernd-Arno Behrens
Thixoforging of particle-reinforced steel materials. 335-343 - Tobias Siebrecht, Dirk Biermann
Simulation of grinding processes using finite element analysis and geometric simulation of individual grains. 345-353 - Rob Thornton
Effects of deep cryogenic treatment on the wear development of H13A tungsten carbide inserts when machining AISI 1045 steel. 355-364 - Dirk Biermann
Active brazed ceramic cemented carbide compound drills for machining lamellar graphite cast iron. 365-372 - Stefan Ruhrmann, Jan Hochdörffer, Gisela Lanza:
A methodological approach to evaluate supplier development based on real options. 373-382 - Günther Schuh, Wolfgang Schultze, Michael Schiffer, Annette Rieger, Stefan Rudolf, Heiko Lehbrink:
Scenario-based determination of product feature uncertainties for robust product architectures. 383-395 - Iñaki Navarro de Sosa
Novel compensation of axial thermal expansion in ball screw drives. 397-406 - Jorge Andrés García Barbosa
Simulation and verification of parametric numerical control programs using a virtual machine tool. 407-413
Volume 8, Number 4, August 2014
- Berend Denkena
Chip formation and tool wear in turning of aluminum-alloyed UHC-steels. 415-421 - Sascha Rausch, Dirk Biermann
Five-axis grinding of wear-resistant, thermally sprayed coatings on free-formed surfaces. 423-429 - E. Uhlmann, T. Borsoi Klein, S. Koprowski:
Tilt angle effects in surface grinding with mounted points. 431-442 - Bernd-Arno Behrens
Reprocessing of AW2007, AW6082 and AW7075 aluminium chips by using sintering and forging operations. 443-451 - Berend Denkena
Modeling and simulation of milling processes including process damping effects. 453-459 - E. Gräser, M. Hajeck, Alexander Bezold, Christoph Broeckmann, Markus Brumm, Fritz Klocke:
Optimized density profiles for powder metallurgical gears. 461-468 - Partha Pratim Saha, Santanu Das
Minimization of exit burr in face milling of medium carbon steel by exit edge beveling. 469-476 - Gustavo Franco Barbosa
R&R (repeatability and reproducibility) gage study applied on gaps' measurements of aircraft assemblies made by a laser technology device. 477-489 - Dirk Biermann
A novel method for chip formation analyses in deep hole drilling with small diameters. 491-497 - Komkamol Chongbunwatana
Simulation of vapour keyhole and weld pool dynamics during laser beam welding. 499-511 - C. Eichenseer, C. Hartig, N. Schell, Wolfgang Hintze:
In situ determination of internal stresses in mixed ceramic cutting tools during friction testing using synchrotron radiation. 513-519 - Thomas Irrenhauser, Gunther Reinhart:
Evaluation of the economic feasibility of RFID in the supply chain. 521-533 - Nicole Stricker
Solving multi-criteria problems under risk: an approach explained using the example of rescheduling in dynamic environments. 535-541 - Ulrich Semmler, Michael Bräunig
Thermal deformations of cutting tools: measurement and numerical simulation. 543-550
Volume 8, Number 5, October 2014
- Alexandre M. Abrão
Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel. 551-558 - Claudia Ehinger, Gunther Reinhart:
Robot-based automation system for the flexible preforming of single-layer cut-outs in composite industry. 559-565 - Christoph Heise, Stefan Böhm
Hybrid cutting of granite by use of ultrasonic assistance. 567-575 - Martin Grüner, Marion Merklein:
Determination of friction coefficients in deep drawing by modification of Siebel's formula for calculation of ideal drawing force. 577-584 - Berend Denkena
Dressing of vitrified bonded CBN tools for continuous generating grinding. 585-591 - Fritz Klocke, Daniel Trauth, M. Terhorst, Patrick Mattfeld:
Friction analysis of alternative tribosystems for a foil free forming of stainless steel using strip drawing test: analysis of physicochemical interactions between coatings and lubricants. 593-602 - Michael Schwander, Dennis Füller, Henry Köhler, F. Feuerhahn, Marcel Dias da Silva
Pre-selection of laser-processed materials for dry forming tools by means of a dry oscillating ball-on-disc test. 603-611 - Bernhard Karpuschewski
Impact of the cooling system on the cutting of medical cobalt chromium with ceramic cutting inserts. 613-618 - Michele Vidoni, Markus Daamen, J. Gastreich, N. Offermanns, Gerhard Hirt:
Hot rolling of AISI 304 tailored strips produced by twin roll strip casting. 619-626 - Berend Denkena
Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills. 627-633 - Thomas Senner, S. Kreissl, Marion Merklein, Josef Meinhardt, Arnulf Lipp:
A modular modeling approach for describing the in-plane forming behavior of unidirectional non-crimp-fabrics. 635-643 - Bernd-Arno Behrens
Deposition welding of hot forging dies using nanoparticle reinforced weld metal. 645-658 - Berend Denkena
Interpretation and optimization of material flow via system behavior reconstruction. 659-668 - Fritz Klocke, Steffen Buchholz, Jens Stauder:
Technology chain optimization: a systematic approach considering the manufacturing history. 669-678 - Valerii Kushner, Michael Storchak
Determining mechanical characteristics of material resistance to deformation in machining. 679-688
Volume 8, Number 6, December 2014
- Bernd Kuhlenkötter
Special issue WGP: "Assembly, Handling and Industrial Robotics". 689 - Jürgen Fleischer
Intelligent gripper technology for the handling of carbon fiber material. 691-700 - M. Höfener, Thorsten Schüppstuhl
A method for increasing the accuracy of "on-workpiece" machining with small industrial robots for composite repair. 701-709 - In Seong Yoo, Maximilian Landgraf, Christina Ramer, Sebastian Reitelshöfer
My new colleague has artificial muscles: a DEA based approach for inherently compliant robotic systems. 711-717 - C. Schlosser, Thorsten Schüppstuhl
Numerical controlled robot crawler: new resource for industries with large scale products. 719-725 - Matthias Bartelt
More than a Mockup. 727-735 - Michael F. Zaeh
Improvement of the machining accuracy of milling robots. 737-744 - Christian Schlette, Anders Glent Buch, Eren Erdal Aksoy
A new benchmark for pose estimation with ground truth from virtual reality. 745-754 - Rainer Müller, Leenhard Hörauf, Matthias Vette, Javier Lopez San Martin, Aitor Alzaga
Robot guided bolt tensioning tool with adaptive process control for the automated assembly of wind turbine rotor blade bearings. 755-764 - Sebastian Hogreve, Kirsten Tracht
Design and implementation of multiaxial force sensing gripper fingers. 765-772 - Nikolas Antzoulatos, Elkin Castro, Daniele Scrimieri
A multi-agent architecture for plug and produce on an industrial assembly platform. 773-781
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-19 20:34 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: