default search action
Production Engineering, Volume 3
Volume 3, Number 1, March 2009
- Frank Vollertsen
, Hendrik Schulze Niehoff, Hanna Wielage:
On the acting pressure in laser deep drawing. 1-8 - Joachim Milberg, Andreas Trautmann:
Defect-free joining of zinc-coated steels by bifocal hybrid laser welding. 9-15 - Manfred Geiger, Marion Merklein, M. Cojutti:
Hydroforming of inhomogeneous sheet pairs with counterpressure. 17-22 - Uwe Heisel, Michael Schaal, G. Wolf:
Burr Formation in milling with minimum quantity lubrication. 23-30 - Anirban Bhattacharya, Santanu Das
Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA. 31-40 - Berend Denkena
Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles. 41-48 - Manfred Geiger, T. Frick, Michael Schmidt
Optical properties of plastics and their role for the modelling of the laser transmission welding process. 49-55 - Bernd-Arno Behrens
A forming process for the increase of α′-martensite growth-rate under mechanical load. 57-62 - Matthias Kleiner, A. Erman Tekkaya
Combination of curved profile extrusion and composite extrusion for increased lightweight properties. 63-68 - Fritz Klocke, K. Gerschwiler, Mustapha Abouridouane:
Size effects of micro drilling in steel. 69-72 - M. Geiger, R. Hohenstein:
Near-field 3D position sensing using optical fibers. 73-80 - Eckart Uhlmann, S. Richarz, V. Mihotovic:
Substrate pre-treatment of cemented carbides using abrasive flow machining and laser beam ablation. 81-86 - Berend Denkena
Rule-based quotation costing of pressure die casting moulds. 87-94 - Zhifeng Zhang, Zhihua Wang:
Empirical study on orderliness evaluation of production system based on aging-quality entropy. 95-101 - Christian Brecher, T. Röthlingshöfer, Christof Gorgels:
Manufacturing simulation of beveloid gears for the use in a general tooth contact analysis software. 103-109 - Jan C. Aurich
Modelling and simulation of process: machine interaction in grinding. 111-120 - Gunther Reinhart, Jochen Werner, Friedrich Lange:
Robot based system for the automation of flow assembly lines. 121-126
Volume 3, Number 2, June 2009
- Manfred Geiger, Karl-Heinz Leitz, Holger Koch, Andreas Otto
A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets. 127-136 - Matthias Kleiner, A. Erman Tekkaya
New incremental methods for springback compensation by stress superposition. 137-144 - Markus Bambach
Strategies to improve the geometric accuracy in asymmetric single point incremental forming. 145-156 - Uwe Heisel, Michael Schaal:
Burr formation in short hole drilling with minimum quantity lubrication. 157-163 - D. Elsenheimer, Peter Groche:
Determination of material properties for hot hydroforming. 165-174 - Matthias Kleiner, A. Erman Tekkaya
A drop-weight high-speed tensile testing instrument. 175-180 - Manfred Geiger, Raoul Plettke, Hinnerk Hagenah
Multi-objective optimization of actuator system design for laser micro adjustment. 181-188 - Susanta Kumar Gauri:
Modeling product-mix planning for batches of melt under multiple objectives in a small scale iron foundry. 189-196 - Michael F. Zäh
Implementation of a process and structure model for turning operations. 197-205 - Alexandra Ast, Steffen Braun, Peter Eberhard
An adaptronic approach to active vibration control of machine tools with parallel kinematics. 207-215
Volume 3, Number 3, September 2009
- Michael F. Zaeh
The effect of scanning strategies on electron beam sintering. 217-224 - Ekkard Brinksmeier
Thermochemical material removal of diamond by solid iron and mischmetal. 225-229 - Padmanathan Kathirgamanathan, Thomas Neitzert:
Optimization of pocket design to produce a thin shape complex profile. 231-241 - R. S. Jadoun, Pradeep Kumar, B. K. Mishra:
Taguchi's optimization of process parameters for production accuracy in ultrasonic drilling of engineering ceramics. 243-253 - Fritz Klocke, Christof Gorgels, Vasilios Vasiliou:
Analysis of the influence of gear dimensions on cutting speed and contact conditions during the gear honing process. 255-259 - Eckart Uhlmann, Stefan Herter, Robert Gerstenberger, Martin Roeder:
Quasi-static chip formation of intermetallic titanium aluminides. 261-270 - Michael F. Zäh
Experimental and numerical identification of process parameters of grind-hardening and resulting part distortions. 271-279 - Michael F. Zäh
Form-flexible tools for injection molding: approach for the economic application of injection molding for small lot sizes. 281-285 - Peter Nyhuis, Ben Münzberg, Marco Kennemann:
Configuration and regulation of PPC. 287-294 - Carsten Wagner, Peter Nyhuis:
A systematic approach to analysis and design of global production networks. 295-303 - Christian Brecher, Thomas Rudolf:
Adaptive logging module for monitoring applications using control internal digital drive signals. 305-312 - Uwe Heisel, Norman Tonn:
Reconfigurable counter spindle module with integrated device for fast spindle alignment. 313-321 - Christian Brecher, Stephan Witt, Türker Yagmur:
Influences of oil additives on the wear behavior of ball screws. 323-327
Volume 3, Numbers 4-5, December 2009
- Vladimir Oglodin, Christian Kircher, Peter Klemm:
The stemadi concept: situation-oriented and user-friendly provision of guidelines at the machine. 329-338 - Dirk Biermann
Simulation of the BTA deep-hole drilling process. 339-346 - Reimund Neugebauer, Sören Scheffler, Reinhart Poprawe, Andreas Weisheit:
Local laser heat treatment of ultra high strength steels to improve formability. 347-351 - Michael F. Zäh
Experimental and numerical investigation of the process chain from composite extrusion to friction stir welding regarding the residual stresses in composite extruded profiles. 353-360 - Kandarp Patel, Ajay Batish, Anirban Bhattacharya:
Optimization of surface roughness in an end-milling operation using nested experimental design. 361-373 - Dirk Biermann
Influence of cutting edge geometry and cutting edge radius on the stability of micromilling processes. 375-380 - Bernd-Arno Behrens
Flashless precision forging of a two-cylinder-crankshaft. 381-389 - Fritz Klocke, Vladimir Bäcker, Hagen Wegner, Björn Feldhaus, Hans-Uwe Baron, Roland Hessert:
Influence of process and geometry parameters on the surface layer state after roller burnishing of IN718. 391-399 - Manfred Geiger, Marion Merklein, Uwe Vogt:
Aluminum tailored heat treated blanks. 401-410 - Dirk Biermann
A study of grinding silicon nitride and cemented carbide materials with diamond grinding wheels. 411-416 - Vinod Kumar, J. S. Khamba:
Parametric optimization of ultrasonic machining of co-based super alloy using the Taguchi multi-objective approach. 417-425 - Alexandru Dadalau, A. Hafla, Alexander Verl
A new adaptive penalization scheme for topology optimization. 427-434 - Nicholas Drude, Leopold Meier, Hartmut Hoffmann, Jürgen Scheurle:
Model based strategies for an optimised ribbing design of large forming tools. 435-440 - Michael F. Zaeh
Integrated simulation of the process chain composite extrusion-milling-welding for lightweight frame structures. 441-451 - Fritz Klocke, Christof Gorgels, Emmanouil Bouzakis
Tool life increase of coated carbide tools by micro blasting. 453-459 - Marc Simnofske, Annika Raatz
Design process for adaptronic machine tools. 461-468 - Björn L. T. Beekhuis, Ekkard Brinksmeier
Improving the shape quality of bearing rings in soft turning by using a Fast Tool Servo. 469-474 - Christian Brecher, Stephan Witt:
Interactive analysis of the structural mechanic behaviour of machine tools. 475-481 - Eberhard Abele, Sören Dietz, Andreas Schiffler:
Analysis of cutting force during milling with regards to the dependency on the penetration angle. 483-487 - Michael F. Zaeh
A multi-dimensional measure for determining the complexity of manual assembly operations. 489-496
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-05 20:49 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: